/* 
 * tclWinSock.c --
 *
 *	This file contains Windows-specific socket related code.
 *
 * Copyright (c) 1995-1997 Sun Microsystems, Inc.
 *
 * See the file "license.terms" for information on usage and redistribution
 * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 *
 * RCS: @(#) $Id: tclWinSock.c,v 1.36.2.3 2005/01/27 22:53:39 andreas_kupries Exp $
 */

#include "tclWinInt.h"

/*
 * Make sure to remove the redirection defines set in tclWinPort.h
 * that is in use in other sections of the core, except for us.
 */
#undef getservbyname
#undef getsockopt
#undef ntohs
#undef setsockopt

/*
 * The following variable is used to tell whether this module has been
 * initialized.
 */

static int initialized = 0;

static int  hostnameInitialized = 0;
static char hostname[255];	/* This buffer should be big enough for
                                 * hostname plus domain name. */

TCL_DECLARE_MUTEX(socketMutex)

#ifdef UNDER_CE
#undef WSAGetLastError
extern int WSAAsyncSelect(SOCKET s, HWND hwnd, unsigned int msg, long events);
#endif

/*
 * Mingw and Cygwin may not have LPFN_* typedefs.
 */

#ifdef HAVE_NO_LPFN_DECLS
    typedef SOCKET (PASCAL FAR *LPFN_ACCEPT)(SOCKET s,
            struct sockaddr FAR * addr, int FAR * addrlen);
    typedef int (PASCAL FAR *LPFN_BIND)(SOCKET s,
            const struct sockaddr FAR *addr, int namelen);
    typedef int (PASCAL FAR *LPFN_CLOSESOCKET)(SOCKET s);
    typedef int (PASCAL FAR *LPFN_CONNECT)(SOCKET s,
            const struct sockaddr FAR *name, int namelen);
    typedef struct hostent FAR * (PASCAL FAR *LPFN_GETHOSTBYADDR)
            (const char FAR *addr, int addrlen, int addrtype);
    typedef struct hostent FAR * (PASCAL FAR *LPFN_GETHOSTBYNAME)
            (const char FAR * name);
    typedef int (PASCAL FAR *LPFN_GETHOSTNAME)(char FAR * name,
            int namelen);
    typedef int (PASCAL FAR *LPFN_GETPEERNAME)(SOCKET sock,
            struct sockaddr FAR *name, int FAR *namelen);
    typedef struct servent FAR * (PASCAL FAR *LPFN_GETSERVBYNAME)
            (const char FAR * name, const char FAR * proto);
    typedef int (PASCAL FAR *LPFN_GETSOCKNAME)(SOCKET sock,
            struct sockaddr FAR *name, int FAR *namelen);
    typedef int (PASCAL FAR *LPFN_GETSOCKOPT)(SOCKET s, int level,
            int optname, char FAR * optval, int FAR *optlen);
    typedef u_short (PASCAL FAR *LPFN_HTONS)(u_short hostshort);
    typedef unsigned long (PASCAL FAR *LPFN_INET_ADDR)
            (const char FAR * cp);
    typedef char FAR * (PASCAL FAR *LPFN_INET_NTOA)
            (struct in_addr in);
    typedef int (PASCAL FAR *LPFN_IOCTLSOCKET)(SOCKET s,
            long cmd, u_long FAR *argp);
    typedef int (PASCAL FAR *LPFN_LISTEN)(SOCKET s, int backlog);
    typedef u_short (PASCAL FAR *LPFN_NTOHS)(u_short netshort);
    typedef int (PASCAL FAR *LPFN_RECV)(SOCKET s, char FAR * buf,
            int len, int flags);
    typedef int (PASCAL FAR *LPFN_SELECT)(int nfds,
            fd_set FAR * readfds, fd_set FAR * writefds,
            fd_set FAR * exceptfds,
            const struct timeval FAR * timeout);
    typedef int (PASCAL FAR *LPFN_SEND)(SOCKET s,
            const char FAR * buf, int len, int flags);
    typedef int (PASCAL FAR *LPFN_SETSOCKOPT)(SOCKET s,
            int level, int optname, const char FAR * optval,
            int optlen);
    typedef SOCKET (PASCAL FAR *LPFN_SOCKET)(int af,
            int type, int protocol);
    typedef int (PASCAL FAR *LPFN_WSAASYNCSELECT)(SOCKET s,
            HWND hWnd, u_int wMsg, long lEvent);
    typedef int (PASCAL FAR *LPFN_WSACLEANUP)(void);
    typedef int (PASCAL FAR *LPFN_WSAGETLASTERROR)(void);
    typedef int (PASCAL FAR *LPFN_WSASTARTUP)(WORD wVersionRequired,
            LPWSADATA lpWSAData);
#endif


/*
 * The following structure contains pointers to all of the WinSock API
 * entry points used by Tcl.  It is initialized by InitSockets.  Since
 * we dynamically load the Winsock DLL on demand, we must use this
 * function table to refer to functions in the winsock API.
 */

static struct {
    HMODULE		    hModule;	/* Handle to WinSock library. */

    /* Winsock 1.1 functions */
    LPFN_ACCEPT		    accept;
    LPFN_BIND		    bind;
    LPFN_CLOSESOCKET	    closesocket;
    LPFN_CONNECT	    connect;
    LPFN_GETHOSTBYADDR	    gethostbyaddr;
    LPFN_GETHOSTBYNAME	    gethostbyname;
    LPFN_GETHOSTNAME	    gethostname;
    LPFN_GETPEERNAME	    getpeername;
    LPFN_GETSERVBYNAME	    getservbyname;
    LPFN_GETSOCKNAME	    getsockname;
    LPFN_GETSOCKOPT	    getsockopt;
    LPFN_HTONS		    htons;
    LPFN_INET_ADDR	    inet_addr;
    LPFN_INET_NTOA	    inet_ntoa;
    LPFN_IOCTLSOCKET	    ioctlsocket;
    LPFN_LISTEN		    listen;
    LPFN_NTOHS		    ntohs;
    LPFN_RECV		    recv;
    LPFN_SELECT		    select;
    LPFN_SEND		    send;
    LPFN_SETSOCKOPT	    setsockopt;
    LPFN_SOCKET		    socket;
    LPFN_WSAASYNCSELECT	    WSAAsyncSelect;
    LPFN_WSACLEANUP	    WSACleanup;
    LPFN_WSAGETLASTERROR    WSAGetLastError;
    LPFN_WSASTARTUP	    WSAStartup;

} winSock;

/*
 * The following defines declare the messages used on socket windows.
 */

#define SOCKET_MESSAGE	    WM_USER+1
#define SOCKET_SELECT	    WM_USER+2
#define SOCKET_TERMINATE    WM_USER+3
#define SELECT		    TRUE
#define UNSELECT	    FALSE

/*
 * The following structure is used to store the data associated with
 * each socket.
 */

typedef struct SocketInfo {
    Tcl_Channel channel;	   /* Channel associated with this
				    * socket. */
    SOCKET socket;		   /* Windows SOCKET handle. */
    int flags;			   /* Bit field comprised of the flags
				    * described below.  */
    int watchEvents;		   /* OR'ed combination of FD_READ,
				    * FD_WRITE, FD_CLOSE, FD_ACCEPT and
				    * FD_CONNECT that indicate which
				    * events are interesting. */
    int readyEvents;		   /* OR'ed combination of FD_READ,
				    * FD_WRITE, FD_CLOSE, FD_ACCEPT and
				    * FD_CONNECT that indicate which
				    * events have occurred. */
    int selectEvents;		   /* OR'ed combination of FD_READ,
				    * FD_WRITE, FD_CLOSE, FD_ACCEPT and
				    * FD_CONNECT that indicate which
				    * events are currently being
				    * selected. */
    int acceptEventCount;          /* Count of the current number of
				    * FD_ACCEPTs that have arrived and
				    * not yet processed. */
    Tcl_TcpAcceptProc *acceptProc; /* Proc to call on accept. */
    ClientData acceptProcData;	   /* The data for the accept proc. */
    int lastError;		   /* Error code from last message. */
    struct SocketInfo *nextPtr;	   /* The next socket on the per-thread
				    * socket list. */
} SocketInfo;

/*
 * The following structure is what is added to the Tcl event queue when
 * a socket event occurs.
 */

typedef struct SocketEvent {
    Tcl_Event header;		/* Information that is standard for
				 * all events. */
    SOCKET socket;		/* Socket descriptor that is ready.  Used
				 * to find the SocketInfo structure for
				 * the file (can't point directly to the
				 * SocketInfo structure because it could
				 * go away while the event is queued). */
} SocketEvent;

/*
 * This defines the minimum buffersize maintained by the kernel.
 */

#define TCP_BUFFER_SIZE 4096

/*
 * The following macros may be used to set the flags field of
 * a SocketInfo structure.
 */

#define SOCKET_ASYNC		(1<<0)	/* The socket is in blocking
					 * mode. */
#define SOCKET_EOF		(1<<1)	/* A zero read happened on
					 * the socket. */
#define SOCKET_ASYNC_CONNECT	(1<<2)	/* This socket uses async
					 * connect. */
#define SOCKET_PENDING		(1<<3)	/* A message has been sent
					 * for this socket */

typedef struct ThreadSpecificData {
    HWND hwnd;		    /* Handle to window for socket messages. */
    HANDLE socketThread;    /* Thread handling the window */
    Tcl_ThreadId threadId;  /* Parent thread. */
    HANDLE readyEvent;      /* Event indicating that a socket event is
			     * ready.  Also used to indicate that the
			     * socketThread has been initialized and has
			     * started. */
    HANDLE socketListLock;  /* Win32 Event to lock the socketList */
    SocketInfo *socketList; /* Every open socket in this thread has an
			     * entry on this list. */
} ThreadSpecificData;

static Tcl_ThreadDataKey dataKey;
static WNDCLASS windowClass;

/*
 * Static functions defined in this file.
 */

static SocketInfo *	    CreateSocket _ANSI_ARGS_((Tcl_Interp *interp,
				    int port, CONST char *host,
				    int server, CONST char *myaddr,
				    int myport, int async));
static int		    CreateSocketAddress _ANSI_ARGS_(
				    (LPSOCKADDR_IN sockaddrPtr,
				    CONST char *host, int port));
static void		    InitSockets _ANSI_ARGS_((void));
static SocketInfo *	    NewSocketInfo _ANSI_ARGS_((SOCKET socket));
static Tcl_EventCheckProc   SocketCheckProc;
static Tcl_EventProc	    SocketEventProc;
static void		    SocketExitHandler _ANSI_ARGS_((
				    ClientData clientData));
static LRESULT CALLBACK	    SocketProc _ANSI_ARGS_((HWND hwnd,
				    UINT message, WPARAM wParam,
				    LPARAM lParam));
static Tcl_EventSetupProc   SocketSetupProc;
static Tcl_ExitProc	    SocketThreadExitHandler;
static int		    SocketsEnabled _ANSI_ARGS_((void));
static void		    TcpAccept _ANSI_ARGS_((SocketInfo *infoPtr));
static Tcl_DriverBlockModeProc	TcpBlockProc;
static Tcl_DriverCloseProc	TcpCloseProc;
static Tcl_DriverSetOptionProc	TcpSetOptionProc;
static Tcl_DriverGetOptionProc	TcpGetOptionProc;
static Tcl_DriverInputProc	TcpInputProc;
static Tcl_DriverOutputProc	TcpOutputProc;
static Tcl_DriverWatchProc	TcpWatchProc;
static Tcl_DriverGetHandleProc	TcpGetHandleProc;
static int		    WaitForSocketEvent _ANSI_ARGS_((
				SocketInfo *infoPtr, int events,
				int *errorCodePtr));
static DWORD WINAPI	    SocketThread _ANSI_ARGS_((LPVOID arg));

static void             TcpThreadActionProc _ANSI_ARGS_ ((
			   ClientData instanceData, int action));


/*
 * This structure describes the channel type structure for TCP socket
 * based IO.
 */

static Tcl_ChannelType tcpChannelType = {
    "tcp",		    /* Type name. */
    TCL_CHANNEL_VERSION_4,  /* v4 channel */
    TcpCloseProc,	    /* Close proc. */
    TcpInputProc,	    /* Input proc. */
    TcpOutputProc,	    /* Output proc. */
    NULL,		    /* Seek proc. */
    TcpSetOptionProc,	    /* Set option proc. */
    TcpGetOptionProc,	    /* Get option proc. */
    TcpWatchProc,	    /* Set up notifier to watch this channel. */
    TcpGetHandleProc,	    /* Get an OS handle from channel. */
    NULL,		    /* close2proc. */
    TcpBlockProc,	    /* Set socket into (non-)blocking mode. */
    NULL,		    /* flush proc. */
    NULL,		    /* handler proc. */
    NULL,                   /* wide seek proc */
    TcpThreadActionProc,    /* thread action proc */
};


/*
 *----------------------------------------------------------------------
 *
 * InitSockets --
 *
 *	Initialize the socket module.  Attempts to load the wsock32.dll
 *	library and set up the winSock function table.  If successful,
 *	registers the event window for the socket notifier code.
 *
 *	Assumes Mutex is held.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Dynamically loads wsock32.dll, and registers a new window
 *	class and creates a window for use in asynchronous socket
 *	notification.
 *
 *----------------------------------------------------------------------
 */

static void
InitSockets()
{
    DWORD id;
    WSADATA wsaData;
    DWORD err;
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    if (!initialized) {
	initialized = 1;
	Tcl_CreateExitHandler(SocketExitHandler, (ClientData) NULL);

#ifdef UNDER_CE
	winSock.hModule = LoadLibraryA("winsock.dll");
#else
	winSock.hModule = LoadLibraryA("wsock32.dll");
#endif

	if (winSock.hModule == NULL) {
	    return;
	}
    
	/*
	 * Initialize the function table.
	 */

	winSock.accept = (LPFN_ACCEPT)
		GetProcAddress(winSock.hModule, "accept");
	winSock.bind = (LPFN_BIND)
		GetProcAddress(winSock.hModule, "bind");
	winSock.closesocket = (LPFN_CLOSESOCKET)
		GetProcAddress(winSock.hModule, "closesocket");
	winSock.connect = (LPFN_CONNECT)
		GetProcAddress(winSock.hModule, "connect");
	winSock.gethostbyaddr = (LPFN_GETHOSTBYADDR)
		GetProcAddress(winSock.hModule, "gethostbyaddr");
	winSock.gethostbyname = (LPFN_GETHOSTBYNAME)
		GetProcAddress(winSock.hModule, "gethostbyname");
	winSock.gethostname = (LPFN_GETHOSTNAME)
		GetProcAddress(winSock.hModule, "gethostname");
	winSock.getpeername = (LPFN_GETPEERNAME)
		GetProcAddress(winSock.hModule, "getpeername");
#ifdef UNDER_CE
	{
	    HMODULE hCelib = LoadLibrary("celib.dll");

	    winSock.getservbyname = (struct servent* (*)
		    (const char* name, const char* proto))
		GetProcAddress(hCelib, "xcegetservbyname");
	}
#else
	winSock.getservbyname = (LPFN_GETSERVBYNAME)
		GetProcAddress(winSock.hModule, "getservbyname");
#endif
	winSock.getsockname = (LPFN_GETSOCKNAME)
		GetProcAddress(winSock.hModule, "getsockname");
	winSock.getsockopt = (LPFN_GETSOCKOPT)
		GetProcAddress(winSock.hModule, "getsockopt");
	winSock.htons = (LPFN_HTONS)
		GetProcAddress(winSock.hModule, "htons");
	winSock.inet_addr = (LPFN_INET_ADDR)
		GetProcAddress(winSock.hModule, "inet_addr");
	winSock.inet_ntoa = (LPFN_INET_NTOA)
		GetProcAddress(winSock.hModule, "inet_ntoa");
	winSock.ioctlsocket = (LPFN_IOCTLSOCKET)
		GetProcAddress(winSock.hModule, "ioctlsocket");
	winSock.listen = (LPFN_LISTEN)
		GetProcAddress(winSock.hModule, "listen");
	winSock.ntohs = (LPFN_NTOHS)
		GetProcAddress(winSock.hModule, "ntohs");
	winSock.recv = (LPFN_RECV)
		GetProcAddress(winSock.hModule, "recv");
	winSock.select = (LPFN_SELECT)
		GetProcAddress(winSock.hModule, "select");
	winSock.send = (LPFN_SEND)
		GetProcAddress(winSock.hModule, "send");
	winSock.setsockopt = (LPFN_SETSOCKOPT)
		GetProcAddress(winSock.hModule, "setsockopt");
	winSock.socket = (LPFN_SOCKET)
		GetProcAddress(winSock.hModule, "socket");
#ifdef UNDER_CE
	winSock.WSAAsyncSelect  = WSAAsyncSelect;
	winSock.WSACleanup      = WSACleanup;
	winSock.WSAGetLastError = GetLastError;
	winSock.WSAStartup      = WSAStartup;
#else
	winSock.WSAAsyncSelect = (LPFN_WSAASYNCSELECT)
		GetProcAddress(winSock.hModule, "WSAAsyncSelect");
	winSock.WSACleanup = (LPFN_WSACLEANUP)
		GetProcAddress(winSock.hModule, "WSACleanup");
	winSock.WSAGetLastError = (LPFN_WSAGETLASTERROR)
		GetProcAddress(winSock.hModule, "WSAGetLastError");
	winSock.WSAStartup = (LPFN_WSASTARTUP)
		GetProcAddress(winSock.hModule, "WSAStartup");
#endif

	/*
	 * Now check that all fields are properly initialized. If not,
	 * return zero to indicate that we failed to initialize
	 * properly.
	 */

	if ((winSock.accept == NULL) ||
		(winSock.bind == NULL) ||
		(winSock.closesocket == NULL) ||
		(winSock.connect == NULL) ||
		(winSock.gethostbyname == NULL) ||
		(winSock.gethostbyaddr == NULL) ||
		(winSock.gethostname == NULL) ||
		(winSock.getpeername == NULL) ||
		(winSock.getservbyname == NULL) ||
		(winSock.getsockname == NULL) ||
		(winSock.getsockopt == NULL) ||
		(winSock.htons == NULL) ||
		(winSock.inet_addr == NULL) ||
		(winSock.inet_ntoa == NULL) ||
		(winSock.ioctlsocket == NULL) ||
		(winSock.listen == NULL) ||
		(winSock.ntohs == NULL) ||
		(winSock.recv == NULL) ||
		(winSock.select == NULL) ||
		(winSock.send == NULL) ||
		(winSock.setsockopt == NULL) ||
		(winSock.socket == NULL) ||
		(winSock.WSAAsyncSelect == NULL) ||
		(winSock.WSACleanup == NULL) ||
		(winSock.WSAGetLastError == NULL) ||
		(winSock.WSAStartup == NULL))
	{
	    goto unloadLibrary;
	}
	
	/*
	 * Create the async notification window with a new class.  We
	 * must create a new class to avoid a Windows 95 bug that causes
	 * us to get the wrong message number for socket events if the
	 * message window is a subclass of a static control.
	 */
    
	windowClass.style = 0;
	windowClass.cbClsExtra = 0;
	windowClass.cbWndExtra = 0;
	windowClass.hInstance = TclWinGetTclInstance();
	windowClass.hbrBackground = NULL;
	windowClass.lpszMenuName = NULL;
	windowClass.lpszClassName = "TclSocket";
	windowClass.lpfnWndProc = SocketProc;
	windowClass.hIcon = NULL;
	windowClass.hCursor = NULL;

	if (!RegisterClassA(&windowClass)) {
	    TclWinConvertError(GetLastError());
	    goto unloadLibrary;
	}

	/*
	 * Initialize the winsock library and check the interface
	 * version actually loaded. We only ask for the 1.1 interface
	 * and do require that it not be less than 1.1.
	 */

#define WSA_VERSION_MAJOR   1
#define WSA_VERSION_MINOR   1
#define WSA_VERSION_REQD    MAKEWORD(WSA_VERSION_MAJOR, WSA_VERSION_MINOR)

	if ((err = winSock.WSAStartup(WSA_VERSION_REQD, &wsaData)) != 0) {
	    TclWinConvertWSAError(err);
	    goto unloadLibrary;
	}

	/*
	 * Note the byte positions are swapped for the comparison, so
	 * that 0x0002 (2.0, MAKEWORD(2,0)) doesn't look less than 0x0101
	 * (1.1).  We want the comparison to be 0x0200 < 0x0101.
	 */

	if (MAKEWORD(HIBYTE(wsaData.wVersion), LOBYTE(wsaData.wVersion))
		< MAKEWORD(WSA_VERSION_MINOR, WSA_VERSION_MAJOR)) {
	    TclWinConvertWSAError(WSAVERNOTSUPPORTED);
	    winSock.WSACleanup();
	    goto unloadLibrary;
	}

#undef WSA_VERSION_REQD
#undef WSA_VERSION_MAJOR
#undef WSA_VERSION_MINOR
    }

    /*
     * Check for per-thread initialization.
     */

    if (tsdPtr == NULL) {
	tsdPtr = TCL_TSD_INIT(&dataKey);
	tsdPtr->socketList = NULL;
	tsdPtr->hwnd = NULL;

	tsdPtr->threadId = Tcl_GetCurrentThread();
	
	tsdPtr->readyEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
	tsdPtr->socketListLock = CreateEvent(NULL, FALSE, TRUE, NULL);
	tsdPtr->socketThread = CreateThread(NULL, 256, SocketThread,
		tsdPtr, 0, &id);
#ifdef UNDER_CE
	SetThreadPriority(tsdPtr->socketThread, THREAD_PRIORITY_ABOVE_NORMAL);
#else
	SetThreadPriority(tsdPtr->socketThread, THREAD_PRIORITY_HIGHEST);
#endif

	if (tsdPtr->socketThread == NULL) {
	    goto unloadLibrary;
	}
	

	/*
	 * Wait for the thread to signal that the window has
	 * been created and is ready to go.  Timeout after twenty
	 * seconds.
	 */
	
	if (WaitForSingleObject(tsdPtr->readyEvent, 20000)
		== WAIT_TIMEOUT) {
	    goto unloadLibrary;
	}

	if (tsdPtr->hwnd == NULL) {
	    goto unloadLibrary;
	}
	
	Tcl_CreateEventSource(SocketSetupProc, SocketCheckProc, NULL);
	Tcl_CreateThreadExitHandler(SocketThreadExitHandler, NULL);
    }
    return;

unloadLibrary:
    if (tsdPtr != NULL && tsdPtr->hwnd != NULL) {
	SocketThreadExitHandler(0);
    }
    FreeLibrary(winSock.hModule);
    winSock.hModule = NULL;
    return;
}

/*
 *----------------------------------------------------------------------
 *
 * SocketsEnabled --
 *
 *	Check that the WinSock DLL is loaded and ready.
 *
 * Results:
 *	1 if it is.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

    /* ARGSUSED */
static int
SocketsEnabled()
{
    int enabled;
    Tcl_MutexLock(&socketMutex);
    enabled = (winSock.hModule != NULL);
    Tcl_MutexUnlock(&socketMutex);
    return enabled;
}


/*
 *----------------------------------------------------------------------
 *
 * SocketExitHandler --
 *
 *	Callback invoked during exit clean up to delete the socket
 *	communication window and to release the WinSock DLL.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

    /* ARGSUSED */
static void
SocketExitHandler(clientData)
    ClientData clientData;              /* Not used. */
{
    Tcl_MutexLock(&socketMutex);
    if (winSock.hModule) {
	/*
	 * Make sure the socket event handling window is cleaned-up
	 * for, at most, this thread.
	 */
	SocketThreadExitHandler(clientData);
	UnregisterClass("TclSocket", TclWinGetTclInstance());
	winSock.WSACleanup();
	FreeLibrary(winSock.hModule);
	winSock.hModule = NULL;
    }
    initialized = 0;
    hostnameInitialized = 0;
    Tcl_MutexUnlock(&socketMutex);
}

/*
 *----------------------------------------------------------------------
 *
 * SocketThreadExitHandler --
 *
 *	Callback invoked during thread clean up to delete the socket
 *	event source.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Delete the event source.
 *
 *----------------------------------------------------------------------
 */

    /* ARGSUSED */
static void
SocketThreadExitHandler(clientData)
    ClientData clientData;              /* Not used. */
{
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    if (tsdPtr != NULL && tsdPtr->socketThread != NULL) {
	DWORD exitCode;

	GetExitCodeThread(tsdPtr->socketThread, &exitCode);
	if (exitCode == STILL_ACTIVE) {
	    PostMessage(tsdPtr->hwnd, SOCKET_TERMINATE, 0, 0);
	    /*
	     * Wait for the thread to close.  This ensures that we are
	     * completely cleaned up before we leave this function.
	     * If Tcl_Finalize was called from DllMain, the thread
	     * is in a paused state so we need to timeout and continue.
	     */

	    WaitForSingleObject(tsdPtr->socketThread, 100);
	}
	CloseHandle(tsdPtr->socketThread);
	tsdPtr->socketThread = NULL;
	CloseHandle(tsdPtr->readyEvent);
	CloseHandle(tsdPtr->socketListLock);

	Tcl_DeleteThreadExitHandler(SocketThreadExitHandler, NULL);
	Tcl_DeleteEventSource(SocketSetupProc, SocketCheckProc, NULL);
    }
}

/*
 *----------------------------------------------------------------------
 *
 * TclpHasSockets --
 *
 *	This function determines whether sockets are available on the
 *	current system and returns an error in interp if they are not.
 *	Note that interp may be NULL.
 *
 * Results:
 *	Returns TCL_OK if the system supports sockets, or TCL_ERROR with
 *	an error in interp.
 *
 * Side effects:
 *	If not already prepared, initializes the TSD structure and
 *	socket message handling thread associated to the calling thread
 *	for the subsystem of the driver.
 *
 *----------------------------------------------------------------------
 */

int
TclpHasSockets(interp)
    Tcl_Interp *interp;
{
    Tcl_MutexLock(&socketMutex);
    InitSockets();
    Tcl_MutexUnlock(&socketMutex);

    if (SocketsEnabled()) {
	return TCL_OK;
    }
    if (interp != NULL) {
	Tcl_AppendResult(interp, "sockets are not available on this system",
		NULL);
    }
    return TCL_ERROR;
}

/*
 *----------------------------------------------------------------------
 *
 * SocketSetupProc --
 *
 *	This procedure is invoked before Tcl_DoOneEvent blocks waiting
 *	for an event.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Adjusts the block time if needed.
 *
 *----------------------------------------------------------------------
 */

void
SocketSetupProc(data, flags)
    ClientData data;		/* Not used. */
    int flags;			/* Event flags as passed to Tcl_DoOneEvent. */
{
    SocketInfo *infoPtr;
    Tcl_Time blockTime = { 0, 0 };
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    if (!(flags & TCL_FILE_EVENTS)) {
	return;
    }
    
    /*
     * Check to see if there is a ready socket.  If so, poll.
     */

    WaitForSingleObject(tsdPtr->socketListLock, INFINITE);
    for (infoPtr = tsdPtr->socketList; infoPtr != NULL; 
	    infoPtr = infoPtr->nextPtr) {
	if (infoPtr->readyEvents & infoPtr->watchEvents) {
	    Tcl_SetMaxBlockTime(&blockTime);
	    break;
	}
    }
    SetEvent(tsdPtr->socketListLock);
}

/*
 *----------------------------------------------------------------------
 *
 * SocketCheckProc --
 *
 *	This procedure is called by Tcl_DoOneEvent to check the socket
 *	event source for events. 
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	May queue an event.
 *
 *----------------------------------------------------------------------
 */

static void
SocketCheckProc(data, flags)
    ClientData data;		/* Not used. */
    int flags;			/* Event flags as passed to Tcl_DoOneEvent. */
{
    SocketInfo *infoPtr;
    SocketEvent *evPtr;
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    if (!(flags & TCL_FILE_EVENTS)) {
	return;
    }
    
    /*
     * Queue events for any ready sockets that don't already have events
     * queued (caused by persistent states that won't generate WinSock
     * events).
     */

    WaitForSingleObject(tsdPtr->socketListLock, INFINITE);
    for (infoPtr = tsdPtr->socketList; infoPtr != NULL; 
	    infoPtr = infoPtr->nextPtr) {
	if ((infoPtr->readyEvents & infoPtr->watchEvents)
		&& !(infoPtr->flags & SOCKET_PENDING)) {
	    infoPtr->flags |= SOCKET_PENDING;
	    evPtr = (SocketEvent *) ckalloc(sizeof(SocketEvent));
	    evPtr->header.proc = SocketEventProc;
	    evPtr->socket = infoPtr->socket;
	    Tcl_QueueEvent((Tcl_Event *) evPtr, TCL_QUEUE_TAIL);
	}
    }
    SetEvent(tsdPtr->socketListLock);
}

/*
 *----------------------------------------------------------------------
 *
 * SocketEventProc --
 *
 *	This procedure is called by Tcl_ServiceEvent when a socket event
 *	reaches the front of the event queue.  This procedure is
 *	responsible for notifying the generic channel code.
 *
 * Results:
 *	Returns 1 if the event was handled, meaning it should be removed
 *	from the queue.  Returns 0 if the event was not handled, meaning
 *	it should stay on the queue.  The only time the event isn't
 *	handled is if the TCL_FILE_EVENTS flag bit isn't set.
 *
 * Side effects:
 *	Whatever the channel callback procedures do.
 *
 *----------------------------------------------------------------------
 */

static int
SocketEventProc(evPtr, flags)
    Tcl_Event *evPtr;		/* Event to service. */
    int flags;			/* Flags that indicate what events to
				 * handle, such as TCL_FILE_EVENTS. */
{
    SocketInfo *infoPtr;
    SocketEvent *eventPtr = (SocketEvent *) evPtr;
    int mask = 0;
    int events;
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    if (!(flags & TCL_FILE_EVENTS)) {
	return 0;
    }

    /*
     * Find the specified socket on the socket list.
     */

    WaitForSingleObject(tsdPtr->socketListLock, INFINITE);
    for (infoPtr = tsdPtr->socketList; infoPtr != NULL; 
	    infoPtr = infoPtr->nextPtr) {
	if (infoPtr->socket == eventPtr->socket) {
	    break;
	}
    }
    SetEvent(tsdPtr->socketListLock);

    /*
     * Discard events that have gone stale.
     */

    if (!infoPtr) {
	return 1;
    }

    infoPtr->flags &= ~SOCKET_PENDING;

    /*
     * Handle connection requests directly.
     */

    if (infoPtr->readyEvents & FD_ACCEPT) {
	TcpAccept(infoPtr);
	return 1;
    }

    /*
     * Mask off unwanted events and compute the read/write mask so 
     * we can notify the channel.
     */

    events = infoPtr->readyEvents & infoPtr->watchEvents;

    if (events & FD_CLOSE) {
	/*
	 * If the socket was closed and the channel is still interested
	 * in read events, then we need to ensure that we keep polling
	 * for this event until someone does something with the channel.
	 * Note that we do this before calling Tcl_NotifyChannel so we don't
	 * have to watch out for the channel being deleted out from under
	 * us.  This may cause a redundant trip through the event loop, but
	 * it's simpler than trying to do unwind protection.
	 */

	Tcl_Time blockTime = { 0, 0 };
	Tcl_SetMaxBlockTime(&blockTime);
	mask |= TCL_READABLE|TCL_WRITABLE;
    } else if (events & FD_READ) {
	fd_set readFds;
	struct timeval timeout;

	/*
	 * We must check to see if data is really available, since someone
	 * could have consumed the data in the meantime.  Turn off async
	 * notification so select will work correctly.	If the socket is
	 * still readable, notify the channel driver, otherwise reset the
	 * async select handler and keep waiting.
	 */

	SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
		(WPARAM) UNSELECT, (LPARAM) infoPtr);

	FD_ZERO(&readFds);
	FD_SET(infoPtr->socket, &readFds);
	timeout.tv_usec = 0;
	timeout.tv_sec = 0;
 
	if (winSock.select(0, &readFds, NULL, NULL, &timeout) != 0) {
	    mask |= TCL_READABLE;
	} else {
	    infoPtr->readyEvents &= ~(FD_READ);
	    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
		    (WPARAM) SELECT, (LPARAM) infoPtr);
	}
    }
    if (events & (FD_WRITE | FD_CONNECT)) {
	mask |= TCL_WRITABLE;
	if (events & FD_CONNECT && infoPtr->lastError != NO_ERROR) {
	    /* connect errors should also fire the readable handler. */
	    mask |= TCL_READABLE;
	}
    }

    if (mask) {
	Tcl_NotifyChannel(infoPtr->channel, mask);
    }
    return 1;
}

/*
 *----------------------------------------------------------------------
 *
 * TcpBlockProc --
 *
 *	Sets a socket into blocking or non-blocking mode.
 *
 * Results:
 *	0 if successful, errno if there was an error.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

static int
TcpBlockProc(instanceData, mode)
    ClientData	instanceData;	/* The socket to block/un-block. */
    int mode;			/* TCL_MODE_BLOCKING or
                                 * TCL_MODE_NONBLOCKING. */
{
    SocketInfo *infoPtr = (SocketInfo *) instanceData;

    if (mode == TCL_MODE_NONBLOCKING) {
	infoPtr->flags |= SOCKET_ASYNC;
    } else {
	infoPtr->flags &= ~(SOCKET_ASYNC);
    }
    return 0;
}

/*
 *----------------------------------------------------------------------
 *
 * TcpCloseProc --
 *
 *	This procedure is called by the generic IO level to perform
 *	channel type specific cleanup on a socket based channel
 *	when the channel is closed.
 *
 * Results:
 *	0 if successful, the value of errno if failed.
 *
 * Side effects:
 *	Closes the socket.
 *
 *----------------------------------------------------------------------
 */

    /* ARGSUSED */
static int
TcpCloseProc(instanceData, interp)
    ClientData instanceData;	/* The socket to close. */
    Tcl_Interp *interp;		/* Unused. */
{
    SocketInfo *infoPtr = (SocketInfo *) instanceData;
    /* TIP #218 */
    int errorCode = 0;
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (SocketsEnabled()) {
        
	/*
         * Clean up the OS socket handle.  The default Windows setting
	 * for a socket is SO_DONTLINGER, which does a graceful shutdown
	 * in the background.
         */
    
        if (winSock.closesocket(infoPtr->socket) == SOCKET_ERROR) {
            TclWinConvertWSAError((DWORD) winSock.WSAGetLastError());
            errorCode = Tcl_GetErrno();
        }
    }

    /* TIP #218. Removed the code removing the structure
     * from the global socket list. This is now done by
     * the thread action callbacks, and only there. This
     * happens before this code is called. We can free
     * without fear of damanging the list.
     */
    ckfree((char *) infoPtr);
    return errorCode;
}

/*
 *----------------------------------------------------------------------
 *
 * NewSocketInfo --
 *
 *	This function allocates and initializes a new SocketInfo
 *	structure.
 *
 * Results:
 *	Returns a newly allocated SocketInfo.
 *
 * Side effects:
 *	None, except for allocation of memory.
 *
 *----------------------------------------------------------------------
 */

static SocketInfo *
NewSocketInfo(socket)
    SOCKET socket;
{
    SocketInfo *infoPtr;
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    infoPtr = (SocketInfo *) ckalloc((unsigned) sizeof(SocketInfo));
    infoPtr->socket = socket;
    infoPtr->flags = 0;
    infoPtr->watchEvents = 0;
    infoPtr->readyEvents = 0;
    infoPtr->selectEvents = 0;
    infoPtr->acceptEventCount = 0;
    infoPtr->acceptProc = NULL;
    infoPtr->lastError = 0;

    /* TIP #218. Removed the code inserting the new structure
     * into the global list. This is now handled in the thread
     * action callbacks, and only there.
     */
    infoPtr->nextPtr = NULL;
    
    return infoPtr;
}

/*
 *----------------------------------------------------------------------
 *
 * CreateSocket --
 *
 *	This function opens a new socket and initializes the
 *	SocketInfo structure.
 *
 * Results:
 *	Returns a new SocketInfo, or NULL with an error in interp.
 *
 * Side effects:
 *	None, except for allocation of memory.
 *
 *----------------------------------------------------------------------
 */

static SocketInfo *
CreateSocket(interp, port, host, server, myaddr, myport, async)
    Tcl_Interp *interp;		/* For error reporting; can be NULL. */
    int port;			/* Port number to open. */
    CONST char *host;		/* Name of host on which to open port. */
    int server;			/* 1 if socket should be a server socket,
				 * else 0 for a client socket. */
    CONST char *myaddr;		/* Optional client-side address */
    int myport;			/* Optional client-side port */
    int async;			/* If nonzero, connect client socket
				 * asynchronously. */
{
    u_long flag = 1;		/* Indicates nonblocking mode. */
    int asyncConnect = 0;	/* Will be 1 if async connect is
				 * in progress. */
    SOCKADDR_IN sockaddr;	/* Socket address */
    SOCKADDR_IN mysockaddr;	/* Socket address for client */
    SOCKET sock;
    SocketInfo *infoPtr;	/* The returned value. */
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
        return NULL;
    }

    if (! CreateSocketAddress(&sockaddr, host, port)) {
	goto error;
    }
    if ((myaddr != NULL || myport != 0) &&
	    ! CreateSocketAddress(&mysockaddr, myaddr, myport)) {
	goto error;
    }

    sock = winSock.socket(AF_INET, SOCK_STREAM, 0);
    if (sock == INVALID_SOCKET) {
	goto error;
    }

    /*
     * Win-NT has a misfeature that sockets are inherited in child
     * processes by default.  Turn off the inherit bit.
     */
#ifndef UNDER_CE
    SetHandleInformation( (HANDLE) sock, HANDLE_FLAG_INHERIT, 0 );
#endif
	
    /*
     * Set kernel space buffering
     */

    TclSockMinimumBuffers((int) sock, TCP_BUFFER_SIZE);

    if (server) {
	/*
	 * Bind to the specified port.  Note that we must not call setsockopt
	 * with SO_REUSEADDR because Microsoft allows addresses to be reused
	 * even if they are still in use.
         *
         * Bind should not be affected by the socket having already been
         * set into nonblocking mode. If there is trouble, this is one place
         * to look for bugs.
	 */
    
	if (winSock.bind(sock, (SOCKADDR *) &sockaddr,
		sizeof(SOCKADDR_IN)) == SOCKET_ERROR) {
            goto error;
        }

        /*
         * Set the maximum number of pending connect requests to the
         * max value allowed on each platform (Win32 and Win32s may be
         * different, and there may be differences between TCP/IP stacks).
         */
        
	if (winSock.listen(sock, SOMAXCONN) == SOCKET_ERROR) {
	    goto error;
	}

	/*
	 * Add this socket to the global list of sockets.
	 */

	infoPtr = NewSocketInfo(sock);

	/*
	 * Set up the select mask for connection request events.
	 */

	infoPtr->selectEvents = FD_ACCEPT;
	infoPtr->watchEvents |= FD_ACCEPT;

    } else {

        /*
         * Try to bind to a local port, if specified.
         */
        
	if (myaddr != NULL || myport != 0) { 
	    if (winSock.bind(sock, (SOCKADDR *) &mysockaddr,
		    sizeof(SOCKADDR_IN)) == SOCKET_ERROR) {
		goto error;
	    }
	}            
    
	/*
	 * Set the socket into nonblocking mode if the connect should be
	 * done in the background.
	 */
    
	if (async) {
	    if (winSock.ioctlsocket(sock, (long) FIONBIO, &flag) == SOCKET_ERROR) {
		goto error;
	    }
	}

	/*
	 * Attempt to connect to the remote socket.
	 */

	if (winSock.connect(sock, (SOCKADDR *) &sockaddr,
		sizeof(SOCKADDR_IN)) == SOCKET_ERROR) {
            TclWinConvertWSAError((DWORD) winSock.WSAGetLastError());
	    if (Tcl_GetErrno() != EWOULDBLOCK) {
		goto error;
	    }

	    /*
	     * The connection is progressing in the background.
	     */

	    asyncConnect = 1;
        }

	/*
	 * Add this socket to the global list of sockets.
	 */

	infoPtr = NewSocketInfo(sock);

	/*
	 * Set up the select mask for read/write events.  If the connect
	 * attempt has not completed, include connect events.
	 */

	infoPtr->selectEvents = FD_READ | FD_WRITE | FD_CLOSE;
	if (asyncConnect) {
	    infoPtr->flags |= SOCKET_ASYNC_CONNECT;
	    infoPtr->selectEvents |= FD_CONNECT;
	}
    }

    /*
     * Register for interest in events in the select mask.  Note that this
     * automatically places the socket into non-blocking mode.
     */

    winSock.ioctlsocket(sock, (long) FIONBIO, &flag);
    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) SELECT, (LPARAM) infoPtr);

    return infoPtr;

error:
    TclWinConvertWSAError((DWORD) winSock.WSAGetLastError());
    if (interp != NULL) {
	Tcl_AppendResult(interp, "couldn't open socket: ",
		Tcl_PosixError(interp), (char *) NULL);
    }
    if (sock != INVALID_SOCKET) {
	winSock.closesocket(sock);
    }
    return NULL;
}

/*
 *----------------------------------------------------------------------
 *
 * CreateSocketAddress --
 *
 *	This function initializes a sockaddr structure for a host and port.
 *
 * Results:
 *	1 if the host was valid, 0 if the host could not be converted to
 *	an IP address.
 *
 * Side effects:
 *	Fills in the *sockaddrPtr structure.
 *
 *----------------------------------------------------------------------
 */

static int
CreateSocketAddress(sockaddrPtr, host, port)
    LPSOCKADDR_IN sockaddrPtr;		/* Socket address */
    CONST char *host;			/* Host.  NULL implies INADDR_ANY */
    int port;				/* Port number */
{
    struct hostent *hostent;		/* Host database entry */
    struct in_addr addr;		/* For 64/32 bit madness */

    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
        Tcl_SetErrno(EFAULT);
        return 0;
    }

    ZeroMemory(sockaddrPtr, sizeof(SOCKADDR_IN));
    sockaddrPtr->sin_family = AF_INET;
    sockaddrPtr->sin_port = winSock.htons((u_short) (port & 0xFFFF));
    if (host == NULL) {
	addr.s_addr = INADDR_ANY;
    } else {
        addr.s_addr = winSock.inet_addr(host);
        if (addr.s_addr == INADDR_NONE) {
            hostent = winSock.gethostbyname(host);
            if (hostent != NULL) {
                memcpy(&addr, hostent->h_addr, (size_t) hostent->h_length);
            } else {
#ifdef	EHOSTUNREACH
                Tcl_SetErrno(EHOSTUNREACH);
#else
#ifdef ENXIO
                Tcl_SetErrno(ENXIO);
#endif
#endif
		return 0;	/* Error. */
	    }
	}
    }

    /*
     * NOTE: On 64 bit machines the assignment below is rumored to not
     * do the right thing. Please report errors related to this if you
     * observe incorrect behavior on 64 bit machines such as DEC Alphas.
     * Should we modify this code to do an explicit memcpy?
     */

    sockaddrPtr->sin_addr.s_addr = addr.s_addr;
    return 1;	/* Success. */
}

/*
 *----------------------------------------------------------------------
 *
 * WaitForSocketEvent --
 *
 *	Waits until one of the specified events occurs on a socket.
 *
 * Results:
 *	Returns 1 on success or 0 on failure, with an error code in
 *	errorCodePtr.
 *
 * Side effects:
 *	Processes socket events off the system queue.
 *
 *----------------------------------------------------------------------
 */

static int
WaitForSocketEvent(infoPtr, events, errorCodePtr)
    SocketInfo *infoPtr;	/* Information about this socket. */
    int events;			/* Events to look for. */
    int *errorCodePtr;		/* Where to store errors? */
{
    int result = 1;
    int oldMode;
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    /*
     * Be sure to disable event servicing so we are truly modal.
     */

    oldMode = Tcl_SetServiceMode(TCL_SERVICE_NONE);
    
    /*
     * Reset WSAAsyncSelect so we have a fresh set of events pending.
     */

    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) UNSELECT, (LPARAM) infoPtr);

    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) SELECT, (LPARAM) infoPtr);

    while (1) {

	if (infoPtr->lastError) {
	    *errorCodePtr = infoPtr->lastError;
	    result = 0;
	    break;
	} else if (infoPtr->readyEvents & events) {
	    break;
	} else if (infoPtr->flags & SOCKET_ASYNC) {
	    *errorCodePtr = EWOULDBLOCK;
	    result = 0;
	    break;
	}

	/*
	 * Wait until something happens.
	 */
	WaitForSingleObject(tsdPtr->readyEvent, INFINITE);
    }
    
    (void) Tcl_SetServiceMode(oldMode);
    return result;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_OpenTcpClient --
 *
 *	Opens a TCP client socket and creates a channel around it.
 *
 * Results:
 *	The channel or NULL if failed.  An error message is returned
 *	in the interpreter on failure.
 *
 * Side effects:
 *	Opens a client socket and creates a new channel.
 *
 *----------------------------------------------------------------------
 */

Tcl_Channel
Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async)
    Tcl_Interp *interp;			/* For error reporting; can be NULL. */
    int port;				/* Port number to open. */
    CONST char *host;			/* Host on which to open port. */
    CONST char *myaddr;			/* Client-side address */
    int myport;				/* Client-side port */
    int async;				/* If nonzero, should connect
                                         * client socket asynchronously. */
{
    SocketInfo *infoPtr;
    char channelName[16 + TCL_INTEGER_SPACE];

    if (TclpHasSockets(interp) != TCL_OK) {
	return NULL;
    }

    /*
     * Create a new client socket and wrap it in a channel.
     */

    infoPtr = CreateSocket(interp, port, host, 0, myaddr, myport, async);
    if (infoPtr == NULL) {
	return NULL;
    }

    wsprintfA(channelName, "sock%d", infoPtr->socket);

    infoPtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName,
	    (ClientData) infoPtr, (TCL_READABLE | TCL_WRITABLE));
    if (Tcl_SetChannelOption(interp, infoPtr->channel, "-translation",
	    "auto crlf") == TCL_ERROR) {
        Tcl_Close((Tcl_Interp *) NULL, infoPtr->channel);
        return (Tcl_Channel) NULL;
    }
    if (Tcl_SetChannelOption(NULL, infoPtr->channel, "-eofchar", "")
	    == TCL_ERROR) {
        Tcl_Close((Tcl_Interp *) NULL, infoPtr->channel);
        return (Tcl_Channel) NULL;
    }
    return infoPtr->channel;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_MakeTcpClientChannel --
 *
 *	Creates a Tcl_Channel from an existing client TCP socket.
 *
 * Results:
 *	The Tcl_Channel wrapped around the preexisting TCP socket.
 *
 * Side effects:
 *	None.
 *
 * NOTE: Code contributed by Mark Diekhans (markd@grizzly.com)
 *
 *----------------------------------------------------------------------
 */

Tcl_Channel
Tcl_MakeTcpClientChannel(sock)
    ClientData sock;		/* The socket to wrap up into a channel. */
{
    SocketInfo *infoPtr;
    char channelName[16 + TCL_INTEGER_SPACE];
    ThreadSpecificData *tsdPtr;

    if (TclpHasSockets(NULL) != TCL_OK) {
	return NULL;
    }

    tsdPtr = (ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    /*
     * Set kernel space buffering and non-blocking.
     */

    TclSockMinimumBuffers((int) sock, TCP_BUFFER_SIZE);

    infoPtr = NewSocketInfo((SOCKET) sock);

    /*
     * Start watching for read/write events on the socket.
     */

    infoPtr->selectEvents = FD_READ | FD_CLOSE | FD_WRITE;
    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) SELECT, (LPARAM) infoPtr);

    wsprintfA(channelName, "sock%d", infoPtr->socket);
    infoPtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName,
	    (ClientData) infoPtr, (TCL_READABLE | TCL_WRITABLE));
    Tcl_SetChannelOption(NULL, infoPtr->channel, "-translation", "auto crlf");
    return infoPtr->channel;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_OpenTcpServer --
 *
 *	Opens a TCP server socket and creates a channel around it.
 *
 * Results:
 *	The channel or NULL if failed.  An error message is returned
 *	in the interpreter on failure.
 *
 * Side effects:
 *	Opens a server socket and creates a new channel.
 *
 *----------------------------------------------------------------------
 */

Tcl_Channel
Tcl_OpenTcpServer(interp, port, host, acceptProc, acceptProcData)
    Tcl_Interp *interp;			/* For error reporting - may be
                                         * NULL. */
    int port;				/* Port number to open. */
    CONST char *host;			/* Name of local host. */
    Tcl_TcpAcceptProc *acceptProc;	/* Callback for accepting connections
                                         * from new clients. */
    ClientData acceptProcData;		/* Data for the callback. */
{
    SocketInfo *infoPtr;
    char channelName[16 + TCL_INTEGER_SPACE];

    if (TclpHasSockets(interp) != TCL_OK) {
	return NULL;
    }

    /*
     * Create a new client socket and wrap it in a channel.
     */

    infoPtr = CreateSocket(interp, port, host, 1, NULL, 0, 0);
    if (infoPtr == NULL) {
	return NULL;
    }

    infoPtr->acceptProc = acceptProc;
    infoPtr->acceptProcData = acceptProcData;

    wsprintfA(channelName, "sock%d", infoPtr->socket);

    infoPtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName,
	    (ClientData) infoPtr, 0);
    if (Tcl_SetChannelOption(interp, infoPtr->channel, "-eofchar", "")
	    == TCL_ERROR) {
        Tcl_Close((Tcl_Interp *) NULL, infoPtr->channel);
        return (Tcl_Channel) NULL;
    }

    return infoPtr->channel;
}

/*
 *----------------------------------------------------------------------
 *
 * TcpAccept --
 *	Accept a TCP socket connection.  This is called by
 *	SocketEventProc and it in turns calls the registered accept
 *	procedure.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Invokes the accept proc which may invoke arbitrary Tcl code.
 *
 *----------------------------------------------------------------------
 */

static void
TcpAccept(infoPtr)
    SocketInfo *infoPtr;	/* Socket to accept. */
{
    SOCKET newSocket;
    SocketInfo *newInfoPtr;
    SOCKADDR_IN addr;
    int len;
    char channelName[16 + TCL_INTEGER_SPACE];
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    /*
     * Accept the incoming connection request.
     */

    len = sizeof(SOCKADDR_IN);

    newSocket = winSock.accept(infoPtr->socket, (SOCKADDR *)&addr,
	    &len);

    /*
     * Clear the ready mask so we can detect the next connection request.
     * Note that connection requests are level triggered, so if there is
     * a request already pending, a new event will be generated.
     */

    if (newSocket == INVALID_SOCKET) {
	infoPtr->acceptEventCount = 0;
	infoPtr->readyEvents &= ~(FD_ACCEPT);
	return;
    }

    /*
     * It is possible that more than one FD_ACCEPT has been sent, so an extra
     * count must be kept.  Decrement the count, and reset the readyEvent bit
     * if the count is no longer > 0.
     */

    infoPtr->acceptEventCount--;

    if (infoPtr->acceptEventCount <= 0) {
	infoPtr->readyEvents &= ~(FD_ACCEPT);
    }

    /*
     * Win-NT has a misfeature that sockets are inherited in child
     * processes by default.  Turn off the inherit bit.
     */

#ifndef UNDER_CE
    SetHandleInformation( (HANDLE) newSocket, HANDLE_FLAG_INHERIT, 0 );
#endif

    /*
     * Add this socket to the global list of sockets.
     */

    newInfoPtr = NewSocketInfo(newSocket);

    /*
     * Select on read/write events and create the channel.
     */

    newInfoPtr->selectEvents = (FD_READ | FD_WRITE | FD_CLOSE);
    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) SELECT, (LPARAM) newInfoPtr);

    wsprintfA(channelName, "sock%d", newInfoPtr->socket);
    newInfoPtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName,
	    (ClientData) newInfoPtr, (TCL_READABLE | TCL_WRITABLE));
    if (Tcl_SetChannelOption(NULL, newInfoPtr->channel, "-translation",
	    "auto crlf") == TCL_ERROR) {
	Tcl_Close((Tcl_Interp *) NULL, newInfoPtr->channel);
	return;
    }
    if (Tcl_SetChannelOption(NULL, newInfoPtr->channel, "-eofchar", "")
	    == TCL_ERROR) {
	Tcl_Close((Tcl_Interp *) NULL, newInfoPtr->channel);
	return;
    }

    /*
     * Invoke the accept callback procedure.
     */

    if (infoPtr->acceptProc != NULL) {
	(infoPtr->acceptProc) (infoPtr->acceptProcData,
		newInfoPtr->channel,
		winSock.inet_ntoa(addr.sin_addr),
		winSock.ntohs(addr.sin_port));
    }
}

/*
 *----------------------------------------------------------------------
 *
 * TcpInputProc --
 *
 *	This procedure is called by the generic IO level to read data from
 *	a socket based channel.
 *
 * Results:
 *	The number of bytes read or -1 on error.
 *
 * Side effects:
 *	Consumes input from the socket.
 *
 *----------------------------------------------------------------------
 */

static int
TcpInputProc(instanceData, buf, toRead, errorCodePtr)
    ClientData instanceData;		/* The socket state. */
    char *buf;				/* Where to store data. */
    int toRead;				/* Maximum number of bytes to read. */
    int *errorCodePtr;			/* Where to store error codes. */
{
    SocketInfo *infoPtr = (SocketInfo *) instanceData;
    int bytesRead;
    DWORD error;
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);
    
    *errorCodePtr = 0;

    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
        *errorCodePtr = EFAULT;
        return -1;
    }

    /*
     * First check to see if EOF was already detected, to prevent
     * calling the socket stack after the first time EOF is detected.
     */

    if (infoPtr->flags & SOCKET_EOF) {
	return 0;
    }

    /*
     * Check to see if the socket is connected before trying to read.
     */

    if ((infoPtr->flags & SOCKET_ASYNC_CONNECT)
	    && ! WaitForSocketEvent(infoPtr,  FD_CONNECT, errorCodePtr)) {
	return -1;
    }
    
    /*
     * No EOF, and it is connected, so try to read more from the socket.
     * Note that we clear the FD_READ bit because read events are level
     * triggered so a new event will be generated if there is still data
     * available to be read.  We have to simulate blocking behavior here
     * since we are always using non-blocking sockets.
     */

    while (1) {
	SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
		(WPARAM) UNSELECT, (LPARAM) infoPtr);
	bytesRead = winSock.recv(infoPtr->socket, buf, toRead, 0);
	infoPtr->readyEvents &= ~(FD_READ);
  
	/*
	 * Check for end-of-file condition or successful read.
	 */
  
	if (bytesRead == 0) {
	    infoPtr->flags |= SOCKET_EOF;
	}
	if (bytesRead != SOCKET_ERROR) {
	    break;
	}
  
	/*
	 * If an error occurs after the FD_CLOSE has arrived,
	 * then ignore the error and report an EOF.
	 */
  
	if (infoPtr->readyEvents & FD_CLOSE) {
	    infoPtr->flags |= SOCKET_EOF;
	    bytesRead = 0;
	    break;
	}
  
	/*
	 * Check for error condition or underflow in non-blocking case.
	 */
  
	error = winSock.WSAGetLastError();
	if ((infoPtr->flags & SOCKET_ASYNC) || (error != WSAEWOULDBLOCK)) {
	    TclWinConvertWSAError(error);
	    *errorCodePtr = Tcl_GetErrno();
	    bytesRead = -1;
	    break;
	}

	/*
	 * In the blocking case, wait until the file becomes readable
	 * or closed and try again.
	 */

	if (!WaitForSocketEvent(infoPtr, FD_READ|FD_CLOSE, errorCodePtr)) {
	    bytesRead = -1;
	    break;
  	}
    }
    
    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) SELECT, (LPARAM) infoPtr);
    
    return bytesRead;
}

/*
 *----------------------------------------------------------------------
 *
 * TcpOutputProc --
 *
 *	This procedure is called by the generic IO level to write data
 *	to a socket based channel.
 *
 * Results:
 *	The number of bytes written or -1 on failure.
 *
 * Side effects:
 *	Produces output on the socket.
 *
 *----------------------------------------------------------------------
 */

static int
TcpOutputProc(instanceData, buf, toWrite, errorCodePtr)
    ClientData instanceData;		/* The socket state. */
    CONST char *buf;			/* Where to get data. */
    int toWrite;			/* Maximum number of bytes to write. */
    int *errorCodePtr;			/* Where to store error codes. */
{
    SocketInfo *infoPtr = (SocketInfo *) instanceData;
    int bytesWritten;
    DWORD error;
    ThreadSpecificData *tsdPtr = 
	(ThreadSpecificData *)TclThreadDataKeyGet(&dataKey);

    *errorCodePtr = 0;

    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
        *errorCodePtr = EFAULT;
        return -1;
    }

    /*
     * Check to see if the socket is connected before trying to write.
     */
    
    if ((infoPtr->flags & SOCKET_ASYNC_CONNECT)
	    && ! WaitForSocketEvent(infoPtr,  FD_CONNECT, errorCodePtr)) {
	return -1;
    }

    while (1) {
	SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
		(WPARAM) UNSELECT, (LPARAM) infoPtr);

	bytesWritten = winSock.send(infoPtr->socket, buf, toWrite, 0);
	if (bytesWritten != SOCKET_ERROR) {
	    /*
	     * Since Windows won't generate a new write event until we hit
	     * an overflow condition, we need to force the event loop to
	     * poll until the condition changes.
	     */

	    if (infoPtr->watchEvents & FD_WRITE) {
		Tcl_Time blockTime = { 0, 0 };
		Tcl_SetMaxBlockTime(&blockTime);
	    }		
	    break;
	}
	
	/*
	 * Check for error condition or overflow.  In the event of overflow, we
	 * need to clear the FD_WRITE flag so we can detect the next writable
	 * event.  Note that Windows only sends a new writable event after a
	 * send fails with WSAEWOULDBLOCK.
	 */

	error = winSock.WSAGetLastError();
	if (error == WSAEWOULDBLOCK) {
	    infoPtr->readyEvents &= ~(FD_WRITE);
	    if (infoPtr->flags & SOCKET_ASYNC) {
		*errorCodePtr = EWOULDBLOCK;
		bytesWritten = -1;
		break;
	    } 
	} else {
	    TclWinConvertWSAError(error);
	    *errorCodePtr = Tcl_GetErrno();
	    bytesWritten = -1;
	    break;
	}

	/*
	 * In the blocking case, wait until the file becomes writable
	 * or closed and try again.
	 */

	if (!WaitForSocketEvent(infoPtr, FD_WRITE|FD_CLOSE, errorCodePtr)) {
	    bytesWritten = -1;
	    break;
	}
    }

    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
	    (WPARAM) SELECT, (LPARAM) infoPtr);
    
    return bytesWritten;
}

/*
 *----------------------------------------------------------------------
 *
 * TcpSetOptionProc --
 *
 *	Sets Tcp channel specific options.
 *
 * Results:
 *	None, unless an error happens.
 *
 * Side effects:
 *	Changes attributes of the socket at the system level.
 *
 *----------------------------------------------------------------------
 */

static int
TcpSetOptionProc (
    ClientData instanceData,	/* Socket state. */
    Tcl_Interp *interp,		/* For error reporting - can be NULL. */
    CONST char *optionName,	/* Name of the option to set. */
    CONST char *value)		/* New value for option. */
{
    SocketInfo *infoPtr;
    SOCKET sock;
/*
    BOOL val = FALSE;
    int boolVar, rtn;
*/
    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
	if (interp) {
	    Tcl_AppendResult(interp, "winsock is not initialized", NULL);
	}
        return TCL_ERROR;
    }

    infoPtr = (SocketInfo *) instanceData;
    sock = infoPtr->socket;

/*
    if (!stricmp(optionName, "-keepalive")) {
	if (Tcl_GetBoolean(interp, value, &boolVar) != TCL_OK) {
	    return TCL_ERROR;
	}
	if (boolVar) val = TRUE;
	rtn = winSock.setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
		(const char *) &val, sizeof(BOOL));
	if (rtn != 0) {
	    TclWinConvertWSAError(winSock.WSAGetLastError());
	    if (interp) {
		Tcl_AppendResult(interp, "couldn't set socket option: ",
			Tcl_PosixError(interp), NULL);
	    }
	    return TCL_ERROR;
	}
	return TCL_OK;

    } else if (!stricmp(optionName, "-nagle")) {
	if (Tcl_GetBoolean(interp, value, &boolVar) != TCL_OK) {
	    return TCL_ERROR;
	}
	if (!boolVar) val = TRUE;
	rtn = winSock.setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
		(const char *) &val, sizeof(BOOL));
	if (rtn != 0) {
	    TclWinConvertWSAError(winSock.WSAGetLastError());
	    if (interp) {
		Tcl_AppendResult(interp, "couldn't set socket option: ",
			Tcl_PosixError(interp), NULL);
	    }
	    return TCL_ERROR;
	}
	return TCL_OK;
    }

    return Tcl_BadChannelOption(interp, optionName, "keepalive nagle");
*/
    return Tcl_BadChannelOption(interp, optionName, "");
}

/*
 *----------------------------------------------------------------------
 *
 * TcpGetOptionProc --
 *
 *	Computes an option value for a TCP socket based channel, or a
 *	list of all options and their values.
 *
 *	Note: This code is based on code contributed by John Haxby.
 *
 * Results:
 *	A standard Tcl result. The value of the specified option or a
 *	list of all options and	their values is returned in the
 *	supplied DString.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

static int
TcpGetOptionProc(instanceData, interp, optionName, dsPtr)
    ClientData instanceData;		/* Socket state. */
    Tcl_Interp *interp;                 /* For error reporting - can be NULL */
    CONST char *optionName;		/* Name of the option to
                                         * retrieve the value for, or
                                         * NULL to get all options and
                                         * their values. */
    Tcl_DString *dsPtr;			/* Where to store the computed
                                         * value; initialized by caller. */
{
    SocketInfo *infoPtr;
    SOCKADDR_IN sockname;
    SOCKADDR_IN peername;
    struct hostent *hostEntPtr;
    SOCKET sock;
    int size = sizeof(SOCKADDR_IN);
    size_t len = 0;
    char buf[TCL_INTEGER_SPACE];

    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
	if (interp) {
	    Tcl_AppendResult(interp, "winsock is not initialized", NULL);
	}
        return TCL_ERROR;
    }
    
    infoPtr = (SocketInfo *) instanceData;
    sock = (int) infoPtr->socket;
    if (optionName != (char *) NULL) {
        len = strlen(optionName);
    }

    if ((len > 1) && (optionName[1] == 'e') &&
	    (strncmp(optionName, "-error", len) == 0)) {
	int optlen;
	DWORD err;
	int ret;
    
	optlen = sizeof(int);
	ret = TclWinGetSockOpt(sock, SOL_SOCKET, SO_ERROR,
		(char *)&err, &optlen);
	if (ret == SOCKET_ERROR) {
	    err = winSock.WSAGetLastError();
	}
	if (err) {
	    TclWinConvertWSAError(err);
	    Tcl_DStringAppend(dsPtr, Tcl_ErrnoMsg(Tcl_GetErrno()), -1);
	}
	return TCL_OK;
    }

    if ((len == 0) ||
            ((len > 1) && (optionName[1] == 'p') &&
                    (strncmp(optionName, "-peername", len) == 0))) {
        if (winSock.getpeername(sock, (LPSOCKADDR) &peername, &size)
                == 0) {
            if (len == 0) {
                Tcl_DStringAppendElement(dsPtr, "-peername");
                Tcl_DStringStartSublist(dsPtr);
            }
            Tcl_DStringAppendElement(dsPtr,
                    winSock.inet_ntoa(peername.sin_addr));

	    if (peername.sin_addr.s_addr == 0) {
	        hostEntPtr = (struct hostent *) NULL;
	    } else {
	        hostEntPtr = winSock.gethostbyaddr(
                    (char *) &(peername.sin_addr), sizeof(peername.sin_addr),
		    AF_INET);
	    }
            if (hostEntPtr != (struct hostent *) NULL) {
                Tcl_DStringAppendElement(dsPtr, hostEntPtr->h_name);
            } else {
                Tcl_DStringAppendElement(dsPtr,
                        winSock.inet_ntoa(peername.sin_addr));
            }
	    TclFormatInt(buf, winSock.ntohs(peername.sin_port));
            Tcl_DStringAppendElement(dsPtr, buf);
            if (len == 0) {
                Tcl_DStringEndSublist(dsPtr);
            } else {
                return TCL_OK;
            }
        } else {
            /*
             * getpeername failed - but if we were asked for all the options
             * (len==0), don't flag an error at that point because it could
             * be an fconfigure request on a server socket. (which have
             * no peer). {copied from unix/tclUnixChan.c}
             */
            if (len) {
		TclWinConvertWSAError((DWORD) winSock.WSAGetLastError());
                if (interp) {
                    Tcl_AppendResult(interp, "can't get peername: ",
                                     Tcl_PosixError(interp),
                                     (char *) NULL);
                }
                return TCL_ERROR;
            }
        }
    }

    if ((len == 0) ||
            ((len > 1) && (optionName[1] == 's') &&
                    (strncmp(optionName, "-sockname", len) == 0))) {
        if (winSock.getsockname(sock, (LPSOCKADDR) &sockname, &size)
                == 0) {
            if (len == 0) {
                Tcl_DStringAppendElement(dsPtr, "-sockname");
                Tcl_DStringStartSublist(dsPtr);
            }
            Tcl_DStringAppendElement(dsPtr,
                    winSock.inet_ntoa(sockname.sin_addr));
	    if (sockname.sin_addr.s_addr == 0) {
	        hostEntPtr = (struct hostent *) NULL;
	    } else {
	        hostEntPtr = winSock.gethostbyaddr(
                    (char *) &(sockname.sin_addr), sizeof(peername.sin_addr),
		    AF_INET);
	    }
            if (hostEntPtr != (struct hostent *) NULL) {
                Tcl_DStringAppendElement(dsPtr, hostEntPtr->h_name);
            } else {
                Tcl_DStringAppendElement(dsPtr,
                        winSock.inet_ntoa(sockname.sin_addr));
            }
            TclFormatInt(buf, winSock.ntohs(sockname.sin_port));
            Tcl_DStringAppendElement(dsPtr, buf);
            if (len == 0) {
                Tcl_DStringEndSublist(dsPtr);
            } else {
                return TCL_OK;
            }
        } else {
	    if (interp) {
		TclWinConvertWSAError((DWORD) winSock.WSAGetLastError());
		Tcl_AppendResult(interp, "can't get sockname: ",
				 Tcl_PosixError(interp),
				 (char *) NULL);
	    }
	    return TCL_ERROR;
	}
    }

/*
    if (len == 0 || !strncmp(optionName, "-keepalive", len)) {
	int optlen;
	BOOL opt = FALSE;
    
        if (len == 0) {
            Tcl_DStringAppendElement(dsPtr, "-keepalive");
        }
	optlen = sizeof(BOOL);
	winSock.getsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, (char *)&opt,
		&optlen);
	if (opt) {
	    Tcl_DStringAppendElement(dsPtr, "1");
	} else {
	    Tcl_DStringAppendElement(dsPtr, "0");
	}
	if (len > 0) return TCL_OK;
    }

    if (len == 0 || !strncmp(optionName, "-nagle", len)) {
	int optlen;
	BOOL opt = FALSE;
    
        if (len == 0) {
            Tcl_DStringAppendElement(dsPtr, "-nagle");
        }
	optlen = sizeof(BOOL);
	winSock.getsockopt(sock, IPPROTO_TCP, TCP_NODELAY, (char *)&opt,
		&optlen);
	if (opt) {
	    Tcl_DStringAppendElement(dsPtr, "0");
	} else {
	    Tcl_DStringAppendElement(dsPtr, "1");
	}
	if (len > 0) return TCL_OK;
    }
*/

    if (len > 0) {
        /*return Tcl_BadChannelOption(interp, optionName, "peername sockname keepalive nagle");*/
        return Tcl_BadChannelOption(interp, optionName, "peername sockname");
    }

    return TCL_OK;
}

/*
 *----------------------------------------------------------------------
 *
 * TcpWatchProc --
 *
 *	Informs the channel driver of the events that the generic
 *	channel code wishes to receive on this socket.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	May cause the notifier to poll if any of the specified 
 *	conditions are already true.
 *
 *----------------------------------------------------------------------
 */

static void
TcpWatchProc(instanceData, mask)
    ClientData instanceData;		/* The socket state. */
    int mask;				/* Events of interest; an OR-ed
                                         * combination of TCL_READABLE,
                                         * TCL_WRITABLE and TCL_EXCEPTION. */
{
    SocketInfo *infoPtr = (SocketInfo *) instanceData;
    
    /*
     * Update the watch events mask. Only if the socket is not a
     * server socket. Fix for SF Tcl Bug #557878.
     */

    if (!infoPtr->acceptProc) {    
        infoPtr->watchEvents = 0;
	if (mask & TCL_READABLE) {
	    infoPtr->watchEvents |= (FD_READ|FD_CLOSE|FD_ACCEPT);
	}
	if (mask & TCL_WRITABLE) {
	    infoPtr->watchEvents |= (FD_WRITE|FD_CLOSE|FD_CONNECT);
	}
      
	/*
	 * If there are any conditions already set, then tell the notifier to poll
	 * rather than block.
	 */

	if (infoPtr->readyEvents & infoPtr->watchEvents) {
	    Tcl_Time blockTime = { 0, 0 };
	    Tcl_SetMaxBlockTime(&blockTime);
	}
    }
}

/*
 *----------------------------------------------------------------------
 *
 * TcpGetProc --
 *
 *	Called from Tcl_GetChannelHandle to retrieve an OS handle from inside
 *	a TCP socket based channel.
 *
 * Results:
 *	Returns TCL_OK with the socket in handlePtr.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

static int
TcpGetHandleProc(instanceData, direction, handlePtr)
    ClientData instanceData;	/* The socket state. */
    int direction;		/* Not used. */
    ClientData *handlePtr;	/* Where to store the handle.  */
{
    SocketInfo *statePtr = (SocketInfo *) instanceData;

    *handlePtr = (ClientData) statePtr->socket;
    return TCL_OK;
}

/*
 *----------------------------------------------------------------------
 *
 * SocketThread --
 *
 *	Helper thread used to manage the socket event handling window.
 *
 * Results:
 *	1 if unable to create socket event window, 0 otherwise.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

static DWORD WINAPI
SocketThread(LPVOID arg)
{
    MSG msg;
    ThreadSpecificData *tsdPtr = (ThreadSpecificData *)(arg);

    tsdPtr->hwnd = CreateWindow("TclSocket", "TclSocket", 
	    WS_TILED, 0, 0, 0, 0, NULL, NULL, windowClass.hInstance, arg);

    /*
     * Signal the main thread that the window has been created
     * and that the socket thread is ready to go.
     */
    
    SetEvent(tsdPtr->readyEvent);
    
    if (tsdPtr->hwnd == NULL) {
	return 1;
    }

    /*
     * Process all messages on the socket window until WM_QUIT.
     */

    while (GetMessage(&msg, NULL, 0, 0) > 0) {
	DispatchMessage(&msg);
    }

    return msg.wParam;
}


/*
 *----------------------------------------------------------------------
 *
 * SocketProc --
 *
 *	This function is called when WSAAsyncSelect has been used
 *	to register interest in a socket event, and the event has
 *	occurred.
 *
 * Results:
 *	0 on success.
 *
 * Side effects:
 *	The flags for the given socket are updated to reflect the
 *	event that occured.
 *
 *----------------------------------------------------------------------
 */

static LRESULT CALLBACK
SocketProc(hwnd, message, wParam, lParam)
    HWND hwnd;
    UINT message;
    WPARAM wParam;
    LPARAM lParam;
{
    int event, error;
    SOCKET socket;
    SocketInfo *infoPtr;
    ThreadSpecificData *tsdPtr =
#ifdef _WIN64
	(ThreadSpecificData *) GetWindowLongPtr(hwnd, GWLP_USERDATA);
#else
	(ThreadSpecificData *) GetWindowLong(hwnd, GWL_USERDATA);
#endif

    switch (message) {

	default:
	    return DefWindowProc(hwnd, message, wParam, lParam);
	    break;

	case WM_CREATE:
	    /*
	     * store the initial tsdPtr, it's from a different thread, so it's
	     * not directly accessible, but needed.
	     */

#ifdef _WIN64
	    SetWindowLongPtr(hwnd, GWLP_USERDATA,
		    (LONG_PTR) ((LPCREATESTRUCT)lParam)->lpCreateParams);
#else
	    SetWindowLong(hwnd, GWL_USERDATA,
		    (LONG) ((LPCREATESTRUCT)lParam)->lpCreateParams);
#endif
	    break;

	case WM_DESTROY:
	    PostQuitMessage(0);
	    break;

	case SOCKET_MESSAGE:
	    event = WSAGETSELECTEVENT(lParam);
	    error = WSAGETSELECTERROR(lParam);
	    socket = (SOCKET) wParam;

	    /*
	     * Find the specified socket on the socket list and update its
	     * eventState flag.
	     */

	    WaitForSingleObject(tsdPtr->socketListLock, INFINITE);
	    for (infoPtr = tsdPtr->socketList; infoPtr != NULL; 
		 infoPtr = infoPtr->nextPtr) {
		if (infoPtr->socket == socket) {
		    /*
		     * Update the socket state.
		     */

		    /*
		     * A count of FD_ACCEPTS is stored, so if an FD_CLOSE
		     * event happens, then clear the FD_ACCEPT count.
		     * Otherwise, increment the count if the current
		     * event is an FD_ACCEPT.
		     */

		    if (event & FD_CLOSE) {
			infoPtr->acceptEventCount = 0;
			infoPtr->readyEvents &= ~(FD_WRITE|FD_ACCEPT);
		    } else if (event & FD_ACCEPT) {
			infoPtr->acceptEventCount++;
		    }

		    if (event & FD_CONNECT) {
			/*
			 * The socket is now connected,
			 * clear the async connect flag.
			 */

			infoPtr->flags &= ~(SOCKET_ASYNC_CONNECT);

			/*
			 * Remember any error that occurred so we can report
			 * connection failures.
			 */

			if (error != ERROR_SUCCESS) {
			    TclWinConvertWSAError((DWORD) error);
			    infoPtr->lastError = Tcl_GetErrno();
			}

		    } 
		    if(infoPtr->flags & SOCKET_ASYNC_CONNECT) {
			infoPtr->flags &= ~(SOCKET_ASYNC_CONNECT);
			if (error != ERROR_SUCCESS) {
			    TclWinConvertWSAError((DWORD) error);
			    infoPtr->lastError = Tcl_GetErrno();
			}
			infoPtr->readyEvents |= FD_WRITE;
		    }
		    infoPtr->readyEvents |= event;

		    /*
		     * Wake up the Main Thread.
		     */
		    SetEvent(tsdPtr->readyEvent);
		    Tcl_ThreadAlert(tsdPtr->threadId);
		    break;
		}
	    }
	    SetEvent(tsdPtr->socketListLock);
	    break;

	case SOCKET_SELECT:
	    infoPtr = (SocketInfo *) lParam;
	    if (wParam == SELECT) {

		winSock.WSAAsyncSelect(infoPtr->socket, hwnd,
			SOCKET_MESSAGE, infoPtr->selectEvents);
	    } else {
		/*
		 * Clear the selection mask
		 */

		winSock.WSAAsyncSelect(infoPtr->socket, hwnd, 0, 0);
	    }
	    break;

	case SOCKET_TERMINATE:
	    DestroyWindow(hwnd);
	    break;
    }

    return 0;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_GetHostName --
 *
 *	Returns the name of the local host.
 *
 * Results:
 *	A string containing the network name for this machine, or
 *	an empty string if we can't figure out the name.  The caller 
 *	must not modify or free this string.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

CONST char *
Tcl_GetHostName()
{
    DWORD length;
    WCHAR wbuf[MAX_COMPUTERNAME_LENGTH + 1];

    Tcl_MutexLock(&socketMutex);
    InitSockets();

    if (hostnameInitialized) {
	Tcl_MutexUnlock(&socketMutex);
        return hostname;
    }
    Tcl_MutexUnlock(&socketMutex);
	
    if (TclpHasSockets(NULL) == TCL_OK) {
	/*
	 * INTL: bug
	 */

	if (winSock.gethostname(hostname, sizeof(hostname)) == 0) {
	    Tcl_MutexLock(&socketMutex);
	    hostnameInitialized = 1;
	    Tcl_MutexUnlock(&socketMutex);
	    return hostname;
	}
    }
    Tcl_MutexLock(&socketMutex);
    length = sizeof(hostname);
    if ((*tclWinProcs->getComputerNameProc)(wbuf, &length) != 0) {
	/*
	 * Convert string from native to UTF then change to lowercase.
	 */

	Tcl_DString ds;

	lstrcpynA(hostname, Tcl_WinTCharToUtf((TCHAR *) wbuf, -1, &ds),
		sizeof(hostname));
	Tcl_DStringFree(&ds);
	Tcl_UtfToLower(hostname);
    } else {
	hostname[0] = '\0';
    }
    hostnameInitialized = 1;
    Tcl_MutexUnlock(&socketMutex);
    return hostname;
}

/*
 *----------------------------------------------------------------------
 *
 * TclWinGetSockOpt, et al. --
 *
 *	These functions are wrappers that let us bind the WinSock
 *	API dynamically so we can run on systems that don't have
 *	the wsock32.dll.  We need wrappers for these interfaces
 *	because they are called from the generic Tcl code.
 *
 * Results:
 *	As defined for each function.
 *
 * Side effects:
 *	As defined for each function.
 *
 *----------------------------------------------------------------------
 */

int
TclWinGetSockOpt(SOCKET s, int level, int optname, char * optval,
	int FAR *optlen)
{
    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
        return SOCKET_ERROR;
    }
    
    return winSock.getsockopt(s, level, optname, optval, optlen);
}

int
TclWinSetSockOpt(SOCKET s, int level, int optname, const char * optval,
	int optlen)
{
    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */
    if (!SocketsEnabled()) {
        return SOCKET_ERROR;
    }

    return winSock.setsockopt(s, level, optname, optval, optlen);
}

u_short
TclWinNToHS(u_short netshort)
{
    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */

    if (!SocketsEnabled()) {
        return (u_short) -1;
    }

    return winSock.ntohs(netshort);
}

struct servent *
TclWinGetServByName(const char * name, const char * proto)
{
    /*
     * Check that WinSock is initialized; do not call it if not, to
     * prevent system crashes. This can happen at exit time if the exit
     * handler for WinSock ran before other exit handlers that want to
     * use sockets.
     */
    if (!SocketsEnabled()) {
        return (struct servent *) NULL;
    }

    return winSock.getservbyname(name, proto);
}

/*
 *----------------------------------------------------------------------
 *
 * TcpThreadActionProc --
 *
 *	Insert or remove any thread local refs to this channel.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Changes thread local list of valid channels.
 *
 *----------------------------------------------------------------------
 */

static void
TcpThreadActionProc (instanceData, action)
     ClientData instanceData;
     int action;
{
    ThreadSpecificData *tsdPtr;
    SocketInfo *infoPtr = (SocketInfo *) instanceData;
    int      notifyCmd;

    if (action == TCL_CHANNEL_THREAD_INSERT) {
        /*
	 * Ensure that socket subsystem is initialized in this thread, or
	 * else sockets will not work.
	 */

        Tcl_MutexLock(&socketMutex);
	InitSockets();
	Tcl_MutexUnlock(&socketMutex);

	tsdPtr = TCL_TSD_INIT(&dataKey);

	WaitForSingleObject(tsdPtr->socketListLock, INFINITE);
	infoPtr->nextPtr = tsdPtr->socketList;
	tsdPtr->socketList = infoPtr;
	SetEvent(tsdPtr->socketListLock);

	notifyCmd = SELECT;
    } else {
        SocketInfo **nextPtrPtr;
	int removed = 0;

	tsdPtr  = TCL_TSD_INIT(&dataKey);

	/* TIP #218, Bugfix: All access to socketList has to be protected by the lock */
	WaitForSingleObject(tsdPtr->socketListLock, INFINITE);
	for (nextPtrPtr = &(tsdPtr->socketList); (*nextPtrPtr) != NULL;
	     nextPtrPtr = &((*nextPtrPtr)->nextPtr)) {
	    if ((*nextPtrPtr) == infoPtr) {
	        (*nextPtrPtr) = infoPtr->nextPtr;
		removed = 1;
		break;
	    }
	}
	SetEvent(tsdPtr->socketListLock);

	/*
	 * This could happen if the channel was created in one thread
	 * and then moved to another without updating the thread
	 * local data in each thread.
	 */

	if (!removed) {
	    Tcl_Panic("file info ptr not on thread channel list");
	}

	notifyCmd = UNSELECT;
    }

    /*
     * Ensure that, or stop, notifications for the socket occur in this thread.
     */

    SendMessage(tsdPtr->hwnd, SOCKET_SELECT,
		(WPARAM) notifyCmd, (LPARAM) infoPtr);
}
