# Makefile.in generated by automake 1.14.1 from Makefile.am.
# demo/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/gnuplot
pkgincludedir = $(includedir)/gnuplot
pkglibdir = $(libdir)/gnuplot
pkglibexecdir = $(libexecdir)/gnuplot
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = demo
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
	$(top_srcdir)/mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/alpha.m4 \
	$(top_srcdir)/m4/apple.m4 $(top_srcdir)/m4/beos.m4 \
	$(top_srcdir)/m4/msdos.m4 $(top_srcdir)/m4/pkg.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /builddir/build/BUILD/gnuplot-5.2.4/missing aclocal-1.14
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AUTOCONF = ${SHELL} /builddir/build/BUILD/gnuplot-5.2.4/missing autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/gnuplot-5.2.4/missing autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/gnuplot-5.2.4/missing automake-1.14
AWK = gawk
CACA_CONFIG = 
CAIROEPS_CFLAGS = -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid 
CAIROEPS_LIBS = -lcairo 
CAIROPANGO_CFLAGS = -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/harfbuzz 
CAIROPANGO_LIBS = -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lcairo 
CAIROPDF_CFLAGS = -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/harfbuzz 
CAIROPDF_LIBS = -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 
CC = armv5tel-redhat-linux-gnueabi-gcc
CCDEPMODE = depmode=none
CC_FOR_BUILD = armv5tel-redhat-linux-gnueabi-gcc
CFLAGS = -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -march=armv5te -mfloat-abi=soft
CPP = armv5tel-redhat-linux-gnueabi-gcc -E
CPPFLAGS =   -I/usr/include  -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/harfbuzz  -I/usr/include/qt5/QtCore -I/usr/include/qt5 -I/usr/include/qt5/QtGui -DQT_NETWORK_LIB -I/usr/include/qt5/QtNetwork -DQT_SVG_LIB -I/usr/include/qt5/QtSvg -I/usr/include/qt5/QtWidgets -DQT_PRINTSUPPORT_LIB -I/usr/include/qt5/QtPrintSupport -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB 
CXX = c++
CXXCPP = c++ -E
CXXDEPMODE = depmode=none
CXXFLAGS = -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -march=armv5te -mfloat-abi=soft -fPIC 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DIST_CONTACT = 
DVIPS = dvips
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EMACS = emacs
EXEEXT = 
GDLIB_CONFIG = /usr/bin/gdlib-config
GIHDIR = /usr/share/gnuplot/5.2
GREP = /usr/bin/grep
GTK_CFLAGS = 
GTK_LIBS = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
KPSEXPAND = kpsexpand
LATEX = latex
LATEX2HTML = latex2html
LDFLAGS = -Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld 
LIBCERF_CFLAGS = 
LIBCERF_LIBS = 
LIBOBJS = 
LIBRARIES_FOR_X =  -lX11 
LIBS = -ldl -lm  -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 
LINUXSUID = 
LN_S = ln -s
LRELEASE = /usr/lib/qt5/bin/lrelease
LTLIBOBJS = 
LUA = lua
LUA_CFLAGS = 
LUA_LIBS = -llua -lm -ldl 
MAINT = #
MAKEINFO = ${SHELL} /builddir/build/BUILD/gnuplot-5.2.4/missing makeinfo
MKDIR_P = /usr/bin/mkdir -p
MOC = /usr/lib/qt5/bin/moc
OBJC = armv5tel-redhat-linux-gnueabi-gcc
OBJCDEPMODE = depmode=none
OBJCFLAGS = 
OBJEXT = o
PACKAGE = gnuplot
PACKAGE_BUGREPORT = 
PACKAGE_NAME = gnuplot
PACKAGE_STRING = gnuplot 5.2.4
PACKAGE_TARNAME = gnuplot
PACKAGE_URL = 
PACKAGE_VERSION = 5.2.4
PATCHLEVEL = 4
PATH_SEPARATOR = :
PDFLATEX = pdflatex
PKG_CONFIG = /usr/bin/armv5tel-redhat-linux-gnueabi-pkg-config
PLAINTEX = tex
QT_CFLAGS = -I/usr/include/qt5/QtCore -I/usr/include/qt5 -I/usr/include/qt5/QtGui -DQT_NETWORK_LIB -I/usr/include/qt5/QtNetwork -DQT_SVG_LIB -I/usr/include/qt5/QtSvg -I/usr/include/qt5/QtWidgets -DQT_PRINTSUPPORT_LIB -I/usr/include/qt5/QtPrintSupport -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB 
QT_LIBS = -lQt5Network -lQt5Svg -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5Core 
RCC = /usr/lib/qt5/bin/rcc
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
TERMLIBS =   -lz -lgd -lgd -lm -lz -lpng16 -lz -lfreetype -lfontconfig -lfreetype -ljpeg -lXpm -lX11 -L/usr/lib -ltiff -lwebp -llua -lm -ldl 
TERMXLIBS = 
TEXDIR = /usr/share/texlive/texmf-dist/tex/latex/gnuplot
TEXHASH = texhash
TROFF = troff
TUTORIAL = tutorial
UIC = /usr/lib/qt5/bin/uic
VERSION = 5.2.4
VERSION_MAJOR = 5.2
WX_CONFIG = no
WX_LIBS = 
X11_APPDEFAULTS_DIR = /etc/X11/app-defaults/
XMKMF = 
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS = 
X_PRE_LIBS =  -lSM -lICE
abs_builddir = /builddir/build/BUILD/gnuplot-5.2.4/demo
abs_srcdir = /builddir/build/BUILD/gnuplot-5.2.4/demo
abs_top_builddir = /builddir/build/BUILD/gnuplot-5.2.4
abs_top_srcdir = /builddir/build/BUILD/gnuplot-5.2.4
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_OBJC = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = /usr/bin
build_alias = armv5tel-redhat-linux-gnueabi
builddir = .
caca_CFLAGS = 
caca_LIBS = 
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host_alias = armv5tel-redhat-linux-gnueabi
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} /builddir/build/BUILD/gnuplot-5.2.4/install-sh
libdir = /usr/lib
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/share/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s&^&&
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /var/lib
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
AUTOMAKE_OPTIONS = foreign
CLEANFILES = binary1 binary2 binary3 defaults.ini equipo2.tmp field2xy.tmp \
soundfit.par temp.set fontfile.ps fontfile_latex.ps epslatex-inc.eps \
epslatex-inc.pdf epslatex.aux epslatex.dvi epslatex.log epslatex.pdf \
epslatex.ps epslatex.tex random.tmp stringvar.tmp fit.log fitmulti.dat

BINARY_FILES = binary1 binary2 binary3
SUBDIRS = $(PLUGIN_DIR)
DIST_SUBDIRS = plugin
DEMO = all.dem
GNUPLOT = gnuplot
EXTRA_DIST = Makefile.am.in scatter2.bin sine.bin \
using.bin gnuplot.cfg world.cor 1.dat 2.dat 3.dat arrowstyle.dat \
asciimat.dat battery.dat big_peak.dat candlesticks.dat cities.dat \
clip14in.dat ctg-y2.dat delaunay-edges.dat ellipses.dat empty-circles.dat \
energy_circles.dat finance.dat fit3.dat glass.dat hemisphr.dat \
histerror.dat histopt.dat immigration.dat klein.dat lcdemo.dat moli3.dat \
optimize.dat orbital_elements.dat rgb_variable.dat scatter2.dat silver.dat \
soundvel.dat srl.dat steps.dat table.dat timedat.dat triangle.dat \
using.dat whale.dat world.dat airfoil.dem all.dem animate2.dem \
animate.dem approximate.dem armillary.dem array.dem arrowstyle.dem \
autoscale.dem azimuth.dem barchart_art.dem binary.dem bins.dem \
bivariat.dem bolditalic.dem borders.dem boxclusters.dem boxplot.dem \
break_continue.dem callargs.dem candlesticks.dem cerf.dem charset.dem \
circles.dem cities.dem clipobject.dem colorscheme.dem colorwheel.dem \
complex_trig.dem contours.dem controls.dem custom_key.dem dashcolor.dem \
dashtypes.dem datastrings.dem dgrid3d.dem discrete.dem electron.dem \
ellipse.dem ellipses_style.dem enhancedtext.dem enhanced_utf8.dem \
epslatex.dem errorbars.dem fenceplot.dem fillbetween.dem fillcrvs.dem \
fillstyle.dem finance.dem fit.dem fitmulti.dem fontfile.dem \
fontfile_latex.dem gantt.dem heatmaps.dem hidden2.dem hidden.dem \
histograms2.dem histograms.dem hypertext.dem image2.dem image.dem \
imageNaN.dem iterate.dem jitter.dem kdensity2d.dem key.dem layout.dem \
lines_arrows.dem linkedaxes.dem macros.dem margins.dem matrix_every.dem \
matrix_index.dem mgr.dem molecule.dem monotonic_spline.dem mouselab_1.dem \
mouselab_2.dem mouselabels.dem mousevariables.dem multiaxis.dem \
multimsh.dem multipalette.dem multiplt.dem named_var.dem nokey.dem \
nonlinear1.dem nonlinear2.dem nonlinear3.dem nonlinear4.dem nonlinear5.dem \
nonlinear6.dem orbits.dem parallel.dem param.dem piecewise.dem \
pm3dcolors.dem pm3d.dem pm3dgamma.dem pm3d_lighting.dem pointsize.dem \
polar.dem poldat.dem prob2.dem probably_tux.dem prob.dem rainbow.dem \
random.dem rectangle.dem rgba_lines.dem rgbalpha.dem rgb_variable.dem \
rotate_labels.dem rugplot.dem running_avg.dem sampling.dem scatter.dem \
simple.dem singulr.dem smooth.dem smooth_splines.dem solar_params.dem \
solar_path.dem special_chars.dem spline.dem stats.dem steps.dem \
stringvar.dem surface1.dem surface2.dem textbox.dem textcolor.dem \
textrotate.dem tics.dem timedat.dem transparent.dem transparent_solids.dem \
ttics.dem using.dem utf8.dem varcolor.dem vector.dem violinplot.dem \
volatile.dem world2.dem world.dem zerror.dem demo.edf density.fnc \
hexa.fnc line.fnc reflect.fnc gen-random.inc stat.inc GM1_sugar.pdb \
bldg.png GM1_bonds.r3d blutux.rgb sound.par sound2.par start.par \
gnuplot.rot gnu-valley random-points gpdemos.tcl html 

PLUGIN_DIR = plugin
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign demo/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign demo/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
	check-am check-local clean clean-generic cscopelist-am ctags \
	ctags-am distclean distclean-generic distclean-tags distdir \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am


all: $(BINARY_FILES)

$(BINARY_FILES): ../src/bf_test
	@echo Creating binary data files
	@../src/bf_test

check-prepare:

check-local: check-noninteractive

check-interactive: check-prepare $(BINARY_FILES)
	@if test -z "$(GNUTERM)" ; then \
	  ( bdir=`pwd` ; PATH=$$bdir/../src:$$PATH \
	    FIT_LOG="" \
	    GNUPLOT_DRIVER_DIR=$$bdir/../src \
	    GNUPLOT_LIB=$(srcdir) $(GNUPLOT) $(DEMO) ); \
	else \
	  ( bdir=`pwd` ; PATH=$$bdir/../src:$$PATH \
	    FIT_LOG="" \
	    GNUPLOT_DRIVER_DIR=$$bdir/../src \
	    GNUTERM="$(GNUTERM)" \
	    GNUPLOT_LIB=$(srcdir) $(GNUPLOT) $(DEMO) ); \
	fi

check-noninteractive: check-prepare $(BINARY_FILES)
	@if test -z "$(GNUTERM)" ; then \
	  ( bdir=`pwd` ; PATH=$$bdir/../src:$$PATH \
	    FIT_LOG="" \
	    GNUPLOT_DRIVER_DIR=$$bdir/../src \
	    GNUPLOT_LIB=$(srcdir) $(GNUPLOT) $(DEMO) </dev/null ); \
	else \
	  ( bdir=`pwd` ; PATH=$$bdir/../src:$$PATH\
	    FIT_LOG="" \
	    GNUPLOT_DRIVER_DIR=$$bdir/../src \
	    GNUTERM="$(GNUTERM)" \
	    GNUPLOT_LIB=$(srcdir) $(GNUPLOT) $(DEMO) </dev/null ); \
	fi

epslatex:
	@if test -z "$(GNUTERM)" ; then \
	  ( bdir=`pwd` ; PATH=$$bdir/../src:$$PATH \
	    GNUPLOT_DRIVER_DIR=$$bdir/../src \
	    GNUPLOT_LIB=$(srcdir) $(GNUPLOT) epslatex.dem ); \
	else \
	  ( bdir=`pwd` ; PATH=$$bdir/../src:$$PATH \
	    GNUPLOT_DRIVER_DIR=$$bdir/../src \
	    GNUTERM="$(GNUTERM)" \
	    GNUPLOT_LIB=$(srcdir) $(GNUPLOT) epslatex.dem ); \
	fi
	latex epslatex
	dvips epslatex

Makefile.am: Makefile.am.in
	rm -f $@ $@t
	sed -n '1,/^##m4-files-begin/p' Makefile.am.in > $@t
	echo EXTRA_DIST = Makefile.am.in *.bin *.cfg *.cor *.dat *.dem *.edf \
	  *.fnc *.inc *.pdb *.png *.r3d *.rgb sound.par sound2.par \
	  start.par *.rot gnu-valley random-points gpdemos.tcl html | fmt | \
	  (tr '\012' @; echo) | sed 's/@$$/%/;s/@/ \\@/g' | tr @% '\012 ' \
	  >> $@t
	sed -n '/^##m4-files-end/,$$p' $< >> $@t
	echo if BUILD_PLUGIN >> $@t
	echo    PLUGIN_DIR = plugin >> $@t
	echo endif >> $@t
	chmod og-w $@t
	mv $@t $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
