2008-12-10  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-rules-x86-64.c (x86_64_call_code): Load %rax with 8 before
	doing the call for calls to variadic functions.

	* jit/jit-rules-x86-64.ins (JIT_OP_CALL_INDIRECT,
	JIT_OP_CALL_VTABLE_PTR): likewise.

2008-12-10  Aleksey Demakov  <ademakov@gmail.com>

	* configure.ac: bump version to 0.1.2
	* NEWS: update news for the 0.1.2 release

2008-11-23  Arto Bendiken <arto.bendiken@gmail.com>

	* jit/jit-apply-x86.h, tools/gen-apply.c, tools/gen-apply-macosx.h:
	Mac OS X compatibility fixes.

2008-11-04  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply-x86-64.h (jit_builtin_apply): Use r11 for calling
	the function and pass the constant 8 in rax for the number of SSE
	registers used to pass values for variadic functions.

	* jit/jit-rules-x86-64.c (_spill_reg): Spill values with sizes
	less than 4 as jit_type_int on the stack.

2008-10-12  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-unwind.c: fix typos.

	* jit/jit-interp.c (_jit_run_function): adjust exception_pc if
	exception is generated by a previous instruction.

2008-10-05  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-interp.c (_jit_run_function): fix implementation of the
	JIT_OP_TRUNC_INT and JIT_OP_TRUNC_UINT opcodes in interpreter.

	* jit/jit-rules-interp.c (_jit_gen_insn): add support of the
	JIT_OP_INCOMING_REG opcode, interpreter needs it for exception
	handling.

2008-08-07  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply.c jit/jit-insn.c, jit/jit-interp.c,
	tools/gen-apply.c: Include stdlib.h if available to pick up the
	declaration of alloca on NetBSD.

2008-07-26  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-rules-x86-64.c (xmm_cmp_reg_imm, xmm_cmp_setcc_reg_imm,
	xmm_cmp_brcc_reg_imm): Add functions to handle compares with an
	immediate value.

	* jit/jit-rules-x86-64.ins: Add rules for an immediate value for
	JIT_OP_FEQ, ..., JIT_OP_DEQ, ... and the float32 and float64
	conditional branch opcodes.

2008-07-19  Klaus Treichel  <ktreichel@web.de>

	* dpas/dpas-parser.y (handle_boolean_binary): Add macro for binary
	operators returning a boolean value.
	(handle_compare_binary): Use handle_boolean_binary instead of
	handle_binary for non pointer compares. Set the result type to
	dpas_type_boolean instead of the common type for pointer compares.

	* tests/cond.pas: Add float compare tests where nan values are
	involved. Add compare tests for the *_inv opcodes.
	Add the same tests using branches for all float compare opcodes.

	* jit/jit-rules-x86-64.c (xmm_setcc, xmm_cmp_setcc_reg_reg,
	xmm_brcc, xmm_cmp_brcc_reg_reg, xmm_cmp_brcc_reg_membase): Add
	functions to handle float compares with consideration of nan values.

	* jit/jit-rules-x66-64.ins: Rewrite the float32 and float64 compare
	and branch rules using the new functions in jit-rules-x86-64.c.
	Add the corresponding *_inv rules.

2008-07-06  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-rules-x86-64.ins: Replace the check if an immediate value
	is a signed 32bit value by using an if clause the new imms32 clause.
	Flag rules for branch opcodes with the branch option and add the
	commutative option where appropriate.

2008-07-06  Juan Jesus Garcia de Soria  <juanj.g_soria@grupobbva.com>

	* jit/jit-reg-alloc.c (choose_input_order): take into account global
	registers to see if it is suitable to exchange input values. This
	fixes a problem that took place when a commutative op is applied to
	a value that resides in a global register and is both the dest and
	the second source value of the op.

2008-05-30  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-common.h: remove unused jit_function_compiled_t
	type.

	* include/jit/jit-except.h, include/jit/jit-common.h: move
	JIT_NO_OFFSET from jit-except.h to jit-common.h.

	* include/jit/jit-unwind.h, jit/jit-unwind.c: new files.
	* include/jit/jit.h, include/jit/Makefile.am: add jit-unwind.h.
	* jit/Makefile.am: add jit-unwind.c.

	* jit/jit-except.c (jit_exception_get_stack_trace): re-implement
	using unwind routines.

2008-05-28  Juan Jesus Garcia de Soria  <juanj.g_soria@grupobbva.com>

	* jit/jit-alloc.c (jit_free_exec): fix VirtualFree arguments.

	* jit/jit-function.c (_jit_function_destroy): free signature on the
	function destruction.

2008-05-27  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-internal.h (jit_builder_t):
	* jit/jit-insn.c (initialize_setjmp_block): remove longjmp_label
	field as useless.

2008-05-26  Klaus Treichel  <ktreichel@web.de>

	* tools/gen-rules-parser.y, tools/gen-rules-scanner.l: Add the imms32
	and immu32 keywords for 32bit signed and unsigned immediate values.

	* tools/gen-apply.c: Add support for apply return structs where
	different float types are at different offsets in the return struct.

	* jit/jit-apply.c (closure_handler): Handle return of different float
	types with different macros.

	* jit/jit-apply-x86.h (jit_builtin_return_float): Adjust macro to
	the new apply return struct layout.
	Add the new jit_builtin_return_double and jit_builtin_return_nfloat
	macros.
	Fix jit_builtin_return_float macro for MS cl.

	* jit/jit-apply-x86-64.h (jit_builtin_return_float): Adjust macro
	to the new apply return struct layout.
	Add the new jit_builtin_return_double and jit_builtin_return_nfloat
	macros.

	* jit/jit-apply-func.h: Add the new jit_builtin_return_double,
	jit_builtin_return_nfloat and jit_builtin_return_long macros.

2008-05-26  Juan Jesus Garcia de Soria  <juanj.g_soria@grupobbva.com>

	* include/jit/jit-defs.h.in: define JIT_EXPORT_DATA macro to support
	win32 DLL symbol import/export idiosyncrasy. On non-win32 this macro
	is simply "extern".
	* include/jit/jit-type.h, include/jit/jit-opcode.h: replace "extern"
	with JIT_EXPORT_DATA in data declaration.

2008-05-24  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-rules-x86-64.c (_jit_gen_prolog, _jit_gen_epilog): Add
	support for the param area.
	(_jit_setup_call_stack): Define this function only if not using
	the param area.
	(_jit_create_call_setup_insns): Call _jit_fix_call_stack with
	and without usage of the param area.
	(_jit_create_call_return_insns): Declare the locals abi and
	current_param only if built without support of the param area to
	avoid compiler warnings.

	* jit/jit-rules-x86-64.ins: Add the support of the
	JIT_OP_SET_PARAM_* opcodes for param area support.

	* jit/jit-rules-x86-64.h: Define JIT_USE_PARAM_AREA and do some
	code cleanup and reformatting.

2008-05-23  Juan Jesus Garcia de Soria  <juanj.g_soria@grupobbva.com>

	* jit/jit-alloc.c (jit_malloc_exec, jit_free_exec): on win32 use
	VirtualAlloc and VirtualFree to allocate/free executable memory.

2008-05-23  Klaus Treichel   <ktreichel@web.de>

	* dpas/dpas-scanner.l, tools/gen-rules-scanner.l,
	tools/gen-sel-scanner.l: Define YY_NO_UNISTD_H if unistd.h is not
	available to prevent flex from including unistd.h.

	* include/jit/jit-arch-x86.h, include/jit/jit-arch-x86.h: Fix the
	 definition of _JIT_ARCH_GET_CURRENT_FRAME for MS cl. Use a
	temporary value for ebp/rbp because cl doesn't like arguments like
	f->x in the __asm statements.

	* jit/jit-rules-x86.ins: Move declaration of patch to the start of
	the block in JIT_OP_ULONG_TO_NFLOAT to be ANSI C compliant.

2008-05-21  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-walk.h (jit_get_next_frame_address): use
	JIT_ARCH_GET_NEXT_FRAME if defined, use gcc syntax only if
	defined __GNUC__.

2008-05-12  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply-x86-64.h: Include jit/jit-common.h instead of
	jit-internal.h to get the definition of the libjit types.

2008-05-08  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: 
	* jit/jit-rules-x86-64.ins: 
	* jit/jit-function.c (compile_block): let register allocator see
	JIT_OP_INCOMING_REG and JIT_OP_RETURN_REG instructions so it can
	free unused values on these instructions rather than on the block
	end.

	* jit/jit-reg-alloc.c (_jit_regs_set_incoming): it is not possible
	to correctly spill the old register value at this point so do not
	attempt this and do not promise this.

2008-05-04  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-reg-alloc.c (_jit_regs_set_outgoing): Set the outgoing
	register inhibited regardless if the value was already in the
	register or not.

	* jit/jit-insn.c (jit_insn_check_null): Emit the check only if the
	value to check is no nint constant != 0.

2008-04-22  Aleksey Demakov  <ademakov@gmail.com>

	* configure.in: update to modern autoconf, rename to configure.ac.
	* configure.ac: renamed from configure.in.

2008-04-20  Klaus Treichel  <ktreichel@web.de>

	* tests/Makefile.am: Add cond.pas to the tests.

	* tests/math.pas: Add tests for more opcodes and execute existing
	tests for more types.

	* tests/cond.pas: Add tests for conditions.

2008-04-20  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: fix the sign opcode for longs (based on
	a patch from Klaus) and slightly modify it for ints.

	* jit/jit-insn.c: some code cleanup:
	(jit_insn_neg, jit_insn_abs, jit_insn_sign): for these unary ops
	replace common_binary()	with more basic function calls that should
	suffice.
	(jit_insn_is_nan, jit_insn_is_finite, jit_insn_is_inf): return
	false for non-floating point values and do not use common_binary()
	as well.

2008-04-19  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-insn.c (jit_insn_sign): the dest value of the sign insn
	has to be int regardless of the argument type.

2008-04-13  Klaus Treichel  <ktreichel@web.de>

	* include/jit/Makefile.am:
	* include/jit/jit-arch-x86-64.h: new file with x86-64 architecture
	specific macros for stack frame inspection.

	* configure.in: check for x86-64 arch, add -fno-omit-frame-pointer
	flag.

	* include/jit/jit-walk.h: use _JIT_ARCH_GET_RETURN_ADDRESS and
	_JIT_ARCH_GET_CURRENT_RETURN if available.

	* jit/jit-gen-x86-64.h: Add additional macros for saving and
	restoring the fpu controlword and the mxcsr register. Add
	additional SSE conversion macros. Add SSE compare macros.
	Add macros for the SSE bit operations on packed values.
	Add macros for SSE sqrt and rounding. Add macros for fpu rounding.

	* jit/jit-rules-x86-64.c: Add the dreg register class and functions
	to handle rounding and SSE bit opcodes on packed values.

	* jit/jit-rules-x86-64.ins: Add INT_TO_NFLOAT, LONG_TO_NFLOAT,
	FLOAT32_TO_NFLOAT, FLOAT64_TO_NFLOAT.
	Rewrite NFLOAT_TO_INT and NFLOAT_TO_LONG to use the new functions
	in jit-rules-x86-64.c. Add handling of ABS, NEG and float compares.

2008-03-31  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-rules-x86.ins: Fix the sign opcode for integers and the
	constant case for longs.

2008-03-30  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-gen-x86-64.h: Add macros for the test, imul, cdw/cdq/cqo
	and cmov instructions.

	* jit/jit-intrinsic.c (jit_int_sign, jit_long_sign): Return 1 for
	values greater than 0 instead of 0.

	* jit/jit-rules-x84-64.ins: Add IMUL, IDIV, IDIV_UN, IREM, IREM_UN,
	LMUL, LDIV, LDIV_UN, LREM and LREM_UN opcodes. Replace the compares
	with zero done with or with test instructions.

2008-03-29  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-rules-x86.ins: Fix signed division of negative values by a
	constant positive power of two.

2008-03-29  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply.c, tools/gen-apply.c: changes to apply needed for
	x86-64 support.

2008-03-25  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-interp.c (jit_function_apply_vararg): fix return code	if
	exception is thrown.

2008-03-24  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-function.c (cleanup_on_restart): Reset the epilog_fixup.

	* jit/jit-apply-x86-64.c: Move parameter passing handling from
	jit-rules-x86-64.c to this file because they are needed by apply too.

	* jit/jit-apply-x86-64.h: Add declarations needed for parameter passing.

	* jit/jit-gen-x86-64.h: Add macros for shift opcodes, register exchanges
	and moves from general purpose register to xmm register and vice versa.

	* jit/jit-rules-x86-64.c: Move parameter handling to jit-apply.x86-64.c.
	Add handling of structs in _jit_gen_load_value and _spill_reg. Fix more
	parameter passing issues.

	* jit/jit-rules-x86-64.ins: Do some cleanup. Add casts to jit_nint when
	checking for valid ranges. Add integer and long shift opcodes. Add
	memset opcode.

2008-03-04  Klaus Treichel  <ktreichel@web.de>

	* jit/Makefile.am: Add jit-rules-x86-64.inc to CLEANFILES to fix
	make distcheck.

2008-03-03  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-cache.h, jit/jit-cache.c, jit/jit-function.c (compile):
	modify cache algorithm to allow a method to occupy more than one
	cache page.

	* include/jit/jit-context.h: add JIT_OPTION_CACHE_MAX_PAGE_FACTOR
	option.
	* jit/jit-context.c (_jit_context_get_cache): use that option.

2008-03-02  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply-x86-64.h: define the sizes for indirector and
	redirector.

	* jit/jit-apply-x86-64.c: do either a memory indirect, RIP relative
	or register relative jump in the redirector whatever is appropriate
	for the address location in _jit_create_indirector.

	* jit/jit-gen-x86-64.h: add lots of additional code generation
	macros and fix some bugs.

	* jit/jit-insn.c: don't mark the current block dead after throwing
	an exception in jit_insn_call_intrinsic because this is handled in
	jit_insn_call_native if the flag JIT_CALL_NORETURN is specified.

	* jit/Makefile.am: Add the new files jit-rules-x86-64.c,
	jit-rules-x86-64.h and jit-rules-x86-64.ins to the sources.

	* jit/jit-rules.h: add the native backend for X86_64.

	* jit/jit-rules-x86-64.c, jit/jit-rules-x86-64.h,
	jit/jit-rules-x86-64.ins: add the first native  code generation for
	X86_64.

	* jit/jit-value.c: create a nint constant for long/ulong types in
	jit_value_create_constant on 64bit archs.

2008-02-29  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-plus.h, jitplus/jit-plus-jump-table.cpp:
	* jitplus/jit-plus-function.cpp, jitplus/Makefile.am: add
	jit_jump_table class and jit_function::insn_jump_table method, add
	jit-plus-jump-table.cpp file, move jit_build_exception class from
	jit-plus-function.cpp to jit-plus.h.

2008-02-26  Aleksey Demakov  <ademakov@gmail.com>

	* use LGPL 2.1 for all the rest - dpas, tools, tests, and doc.

2008-02-06  Aleksey Demakov  <ademakov@gmail.com>

	* auto_gen.sh: by popular demand restore this file although it only
	does "autoreconf -i -f" now.

	* tools/gen-rules-parser.y: update license and copyright notices.

2008-01-30  Klaus Treichel  <ktreichel@web.de>

	* jit/Makefile.am: Fix typo in my last commit.

2008-01-29  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply-x86-64.h: Fix the macros jit_builtin_return_int
	and jit_builtin_return_float.

	* jit/jit-apply-x86-64.c: Add closure support for x86_64.

	* jit/jit-gen-x86-64.h: Add first codegeneration macros for x86_64.

	* jit/Makefile.am: Add the two new files to the libjit sources.

2008-01-26  Aleksey Demakov  <ademakov@gmail.com>

	* auto_gen.sh: remove, use "autoreconf -i -f" instead (thanks
	Dalibor for the hint).
	* INSTALL, config.guess, config.sub, install-sh, missing: remove
	from CVS, these files are automatically generated by autoreconf.
	* mkinstalldirs: remove, this file is obsolete.

2008-01-25  Aleksey Demakov  <ademakov@gmail.com>

	* include/*, jit/*, jitplus/*, jitdynamic/*: use LGPL 2.1.
	* doc/libjit.texi: remove "Why GPL?" chapter.

2008-01-22  Aleksey Demakov  <ademakov@gmail.com>

	* COPYING.LESSER: add LGPL v2.1 file.

	* jit/*.c, jitplus/*.cpp, jitdynamic/*.c: fix texinfo markup for
	parameters. 

2008-01-21 Dalibor Topic <robilad@kaffe.org>

	* jit/Makefile.am (libjit_la_SOURCES): add mising jit-rules-interp.h
	file.

2008-01-16  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-gen-x86.h: Use the supplied base register instead of
	register no. 5 (EBP) in x86_memindex_emit for displacements greater
	than x86_int8 (<-128 or >127).

2008-01-04  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-opcode.c: Add the nint argument to the return_small_struct
	and flush_small_struct opcodes.

2008-01-03  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-opcode.c: Add the nint argument to the copy_struct opcode.

	* jit/jit-rules-interp.c (_jit_gen_start_block): Fix fixups for
	interpreter.

2007-12-31  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-apply-x86-64.h: Swap source and destination for the call
	of jit_memcpy in jit_builtin_apply so that they are in the correct
	order.

2007-12-28  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-interp.c: fix JIT_OP_LCMP_UN opcode.

2007-12-28  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-interp.c: Fix the opcodes JIT_OP_LADD, JIT_OP_ISHL,
	JIT_OP_LSHR_UN, JIT_OP_ICMP_UN, JIT_OP_LCMP and JIT_OP_LCMP_UN in
	the intpreter backend.

2007-12-24  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-gen-x86.h (x86_alu_reg16_imm): add macro.
	* jit/jit-rules-x86.ins: add JIT_OP_NFLOAT_TO_INT and
	JIT_OP_NFLOAT_TO_LONG rules.

2007-12-21  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-internal.h, jit/jit-context.c, jit/jit-function.c: 
	* jit/jit-interp.c: use on-demand driver for interpreter but skip
	indirector/redirector stuff for it.

2007-12-20  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-plus.h: add jit_context::build_start() and
	jit_context::build_end() methods.

	* include/jit/jit-function.h, jit/jit-function.c
	(jit_function_recompile): remove.
	* include/jit/jit-plus.h, jitplus/jit-plus-function.cpp
	(jit_function::recompile): remove.
	* tutorial/t3.c, tutorial/t4.cpp: recompile manually
	instead of using removed recompile functions.

	* doc/libjit.texi: update tutorial.

2007-12-16  Klaus Treichel  <ktreichel@web.de>

	* configure.in: Add support for multi os archs (like x86_64). Put the
	libraries in the correct directories so that 32- and 64-bit code doesn't
	get mixed up.

	* jit/jit-apply-x86-64.h: Add some information about the clobber list to
	jit_builtin_apply and add r10 and r11 to the clobber list because they
	are not preserved by the callee and we call arbitrary functions here.

	* jit/jit-internal.h: Cast _JIT_ALIGN_TO_TYPE to jit_nuint instead of
	unsigned because jit_nuint is guaranteed to have the size of a pointer.
	This fixes compiler warnings on x86_64 too.

2007-11-27  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.c (_jit_gen_load_value): fix compiler warnings.

2007-11-17  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_mark_offset): do not start new block
	on the bytecode mark. If a mark goes just after another mark then
	replace the old mark rather than add the new.

	* jit/jit-cache.c (_jit_cache_get_bytecode)
	(_jit_cache_get_native): fix offset for the last bytecode mark.

2007-11-13  Aleksey Demakov  <ademakov@gmail.com>

	* tools/Makefile.am (noinst_HEADERS): add gen-apply-macosx.h

2007-11-08  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-plus.h, jitplus/jit-plus-function.cpp (new_label):
	add c++ wrapper for jit_function_reserve_label.

	* include/jit/jit-plus.h (clear_recompilable): fix a typo.

2007-10-07  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins (JIT_OP_JUMP_TABLE): fix jump table code
	generation.

	* include/jit/jit-function.h: 
	* jit/jit-function.c (jit_function_reserve_label): add new function
	to create labels for jump tables.

2007-06-11  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (accumulate_relative_offset): remove.
	* jit/jit-insn.c (find_base_insn, jit_insn_load_relative)
	(jit_insn_store_relative, jit_insn_add_relative): add find_base_insn
	function that should finally optimize relative instructions
	correctly.

2007-06-10  Aleksey Demakov  <ademakov@gmail.com>

	* tools/gen-rules-parser.y (gensel_output_clauses): alter selection
	logic so that "reg" rules are chosen over "local" in case the value
	is used again in the same basic block.

	* jit/jit-rules-x86.ins: tweak COPY rules for bytes, shorts, and
	ints.

	* jit/jit-live.c (forward_propagation, backward_propagation)
	(is_copy_insn): do not perform copy propagation if JIT_OP_COPY_INT
	is used for byte and short values.

2007-05-28  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-live.c (forward_propagation, backward_propagation): do not
	optimize addressable and volatile values.

2007-05-28  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-live.c (_jit_function_compute_liveness)
	(forward_propagation, backward_propagation): add simple copy
	propagation that works only within basic blocks.

	* jit/jit-value.c (jit_value_ref): do not set the live flag here
	as this	is done in jit-live.c now.

2007-05-26  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-intrinsic.c: Fix conversion from ulong to nfloat for values
	greater that jit_max_long.

2007-05-26  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_store): remove incorrect optimization
	that eliminates intermediate value without knowledge of its later
	use.

2007-04-04  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (commit_output_value): fix compilation for
	archs without register stack (thanks Klaus).

2007-03-04  Aleksey Demakov  <ademakov@gmail.com>

	* configure.in: update working version to "0.1.1".

2007-03-03  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/Makefile.am: add jit-arch.h to BUILT_SOURCES.

	* doc/Makefile.am: add extract-docs.sh, mkhtml.sh, mkpdf.sh to
	EXTRA_DIST.

	* configure.in: bump version to 0.1.0.
	* NEWS: update news for the 0.1.0 release.

2007-02-25  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (adjust_assignment, _jit_regs_gen): the ops
	that have dest value on x87 stack but have no x87 input values need
	the dest register to be adjusted after spilling too.
	(is_register_occupied, clobbers_register): undo is_register_occupied
	logic introduced 2007-02-12.

2007-02-14  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-function.c (compile_block): check if cache is full and
	exit if so.

2007-02-13  Aleksey Demakov  <ademakov@gmail.com>

	* doc/texinfo.tex: remove an ancient file version from the tree.
	automake --add-missing as well as auto_gen.sh add an up-to-date
	version of it.

	* jit/jit-insn.c, jit/jit-rules-interp.c: 
	* jitplus/jit-plus-value.cpp, jitplus/jit-plus-function.cpp: fix
	texinfo comments.

2007-02-12  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-dump.c (jit_dump_function): flush the output stream upon
	dumping the function.

	* jit/jit-function.c (cleanup_on_restart, reset_value): add new
	functions to clean up the compilation state on restart.
	(compile): replace the code that did cleanup on restart with a call
	to cleanup_on_restart() which does this job more thoroughly.

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: remove _jit_regs_abort()
	function as the new cleanup-on-restart code makes it superflows.

	* jit/jit-reg-alloc.c (is_register_occupied): add new function;
	(clobbers_register, spill_clobbered_register, _jit_regs_gen): fix
	a problem that shows up with the new cleanup method.

	* tools/gen-rules-parser.y (gensel_output_clauses): the conditions
	for the local and frame patterns are changed. If the value is used
	before it is defined then both in_frame and in_register	flags are
	clear. This situation is perfectly valid if there is a backward
	branch form a point after the definition to a point before the use.
	So if the value is not a constant and it is not in a register assume
	that it is on the stack even if the in_frame flag is not set.

2007-02-10  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-function.c: Use the on-demand compilation driver in
	jit_function_apply too. Return the functions' entry point if the
	function is allready compiled in jit_function_compile_entry.

2007-02-04  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-common.h, include/jit/jit-context.h,
	* include/jit/jit-function.h, jit/jit-internal.h, jit/jit-context.c,
	* jit/jit-function.c: provide for user defined on-demand compilation
	driver and delayed function entry point setup.

2007-01-28  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (_jit_regs_gen, set_regdesc_flags): fix bugs
	introduced 2006-12-30 with loading registers for ternary ops and
	handling input register thrash.

2007-01-26  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-arch-x86.h (_JIT_ARCH_GET_CURRENT_FRAME): tweak
	gcc version of the macro.

	* jit/jit-apply-x86.c (_jit_create_redirector): redirector does not
	use stack frame so remove frame set up and restore instructions.

2007-01-23  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-internal.h, jit/jit-function.c: remove the closure_entry
	field from jit_function_t. Find this value on the fly in
	jit_function_to_closure() and jit_function_to_vtable_pointer()
	to be equal either to entry_point or indirector fields.

	* jit/jit-rules-alpha.ins, jit/jit-rules-x86.ins: use
	jit_function_to_closure() instead of the closure_entry field.

2007-01-17  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: complete special x87
	arithmetic support, for other x87 instructions reverse the order of
	arguments on the stack.

	* jit/jit-rules-x86.ins: take advantage of regalloc's x87 arithmetic
	support. Also do not clobber the entire x87 stack for atan, sin, and
	cos rules.

2007-01-12  Heiko Weiss <heiko.weiss@de.trumpf-laser.com>

	* jit/jit-function.c: Fix a typo in jit_function_from_vtable_pointer
	which breaks the build if libjit is built in interpreter mode.

2007-01-04  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-rules-alpha.c: register class should not include FIXED
	registers.

	* .cvsignore, tools/.cvsignore, tutorial/.cvsignore: updated
	the .cvsignore files to ignore some generated files.

2007-01-03  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-rules-alpha.c: initialize alpha register classes.
	Fix signed-ness warnings.

2007-01-02  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: add JIT_OP_IMIN_UN rule (based on the
	  patch #5540 by Kirill Kononenko).

	* jit/jit-reg-alloc.c (set_regdesc_value, set_regdesc_register)
	(choose_output_register): handle EARLY_CLOBBER flag for dest value.

2006-12-30  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-class.c, jit/jit-reg-class.h, jit/Makefile.am: add
	register classes.

	* jit/jit-rules-x86.c (_jit_init_backend): initialize x86 register
	classes.

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: specify register class
	for each value and scratch register. Clean up interface.

	* tools/gen-rules-scanner.l, tools/gen-rules-parser.y: add register
	class declaration; "reg", "lreg", "freg" are not keywords anymore.
	"scratch" requires register class specification. "clobber" accepts
	register class which means all registers in the class are clobbered.
	Remove "only", "spill_before", "unary", and "binary" keywords.
	Replace "unary_note" and "binary_note" with "note". Also replace
	"unary_branch" and "binary_branch" with "branch".

	* jit/jit-rules-alpha.ins, jit/jit-rules-x86.ins: update according
	to the new rule syntax.

2006-12-20  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-thread.h, jit/jit-thread.c: add _jit_global_lock mutex.
	* jit/jit-init.c (jit_init): make sure that initialization is done
	  only once.

2006-12-17  Klaus Treichel  <ktreichel@web.de>

	* include/jit/jit-function.h, jit/jit-function.c: Add the function
	jit_function_from_vtable_pointer to convert a vtable pointer back to
	the jit_function_t.

2006-11-29  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (save_value): fix bug freeing stack register
	that is not on the stack top.

2006-11-27  Kirill Kononenko  <Kirill.Kononenko@gmail.com>

	* jit/jit-rules-x86.c (throw_builtin):
	* jit/jit-rules-x86.ins (JIT_OP_THROW, JIT_OP_LOAD_PC): directly use
	the inst variable to get current PC value for the position-dependent
	code case (patch #5503).

2006-11-27  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-context.h: add JIT_OPTION_POSITION_INDEPENDENT
	option.
	* jit/jit-internal.h (struct _jit_builder): add position_independent
	field.
	* jit/jit-function.c (_jit_function_ensure_builder): initialize
	position_independent field.

	* jit/jit-rules-x86.c (throw_builtin):
	* jit/jit-rules-x86.ins (JIT_OP_ADDRESS_OF_LABEL, JIT_OP_JUMP_TABLE)
	(JIT_OP_THROW, JIT_OP_LOAD_PC): add position_independent check and
	stub missing cases.

2006-11-26  Kirill Kononenko  <Kirill.Kononenko@gmail.com>

	* jit/jit-rules-x86.ins: if JIT_USE_SIGNALS is defined do not emit
	explicit division by zero check (patch #5278).

2006-11-26  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (choose_output_register): fix global register
	use cost computation.

	* jit/jit-rules-x86.ins: mark as commutative JIT_OP_IADD,
	JIT_OP_IMUL, JIT_OP_LADD, JIT_OP_IAND, JIT_OP_IOR, JIT_OP_IXOR,
	JIT_OP_LAND, JIT_OP_LOR, JIT_OP_XOR rules.

2006-11-25  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (exch_stack_top, free_value): fix freeing
	stack registers.

2006-11-25  Kirill Kononenko  <Kirill.Kononenko@gmail.com>

	* jit/jit-rules-x86.ins: add JIT_OP_ISIGN and JIT_OP_LSIGN rules
	(patch #5533), optimize JIT_OP_LNEG rule (patch #5555). [with
	some modifications by Aleksey Demakov.]

2006-11-11  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: add JIT_OP_IABS and JIT_OP_LABS rules.

2006-11-04  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: make comparison opcodes use three-address
	patterns.

2006-11-01  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (commit_input_value, commit_output_value):
	do not increment/decrement the top of the register stack in case of
	fp-value coalescing.

2006-10-23  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: JIT_OP_EXPAND_INT and JIT_OP_EXPAND_UINT
	rules were broken for local byte or short values. Fixed by removing
	the local pattern altogether as the reg pattern produces the same
	code but without the bug.

2006-10-18  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (clobbers_register, bind_value): enable
	coalescing of the destination value of a copy operation with the
	source value in a single register.

	* jit/jit-rules-x86.ins: tag COPY rules with the "copy" keyword
	and change patterns of TRUNC rules to have a separate destination
	register.

2006-10-16  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-interp.h, jit/jit-interp.c (_jit_run_function): 
	* jit/jit-opcode.c, jit/jit-rules-interp.c (_jit_gen_insn): Repair
	struct handling broken since the last interpreter reorganization,
	remove unused interpreter opcodes.

	* jit/jit-rules-interp.c (_jit_gen_start_block): check if the fixup
	position is before the cache end. This prevents segmentation fault
	when the end of cache block is reached and jit_function_compile()
	attempts to generate more code (it checks for the cache end way too
	late).

2006-10-14  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-interp.c (_jit_create_call_return_insns): fix return
	code in case of no return value or struct returned via pointer (this
	is just like 2006-02-20 fix for x86).

	* jit/jit-cfg.c (create_value_entry): an uninitialized value was
	used (thanks Klaus for spotting).

2006-10-02  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-intrinsic.c: Fix a copy bug in jit_ulong_mul (replace - by *).

2006-09-25  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-arch-x86.h, include/jit/jit-arch-generic.h: add
	headers for architecture-specific definitions.
	(_JIT_ARCH_GET_CURRENT_FRAME): add macro to find the stack frame
	pointer.

	* include/jit/Makefile.am: create jit-arch.h as a symlink to one of
	the jit-arch-*.h files depending on the JIT_ARCH value.
	* configure.in: set JIT_ARCH according to the system architecture.

	* include/jit/jit-walk.h (jit_get_current_frame):
	* jit/jit-walk.c (jit_get_starting_frame):
	* tools/gen-apply.c (find_return_offset, detect_frame_offsets): use
	_JIT_ARCH_GET_CURRENT_FRAME macro if available. This resolves the
	problem	with gcc 4.1.* where __builtin_frame_address() function is
	broken (thanks Klaus for identifing the problem).

2006-09-15  Radek Polak <psonek2@seznam.cz>

        * include/jit/jit-insn.h, jit/jit-insn.c, jit/jit-debugger.c: new
        instruction jit_insn_mark_breakpoint_variable.

2006-09-14  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: remove "old" register
	allocation code.

	* configure.in: remove --enable-new-reg-alloc option.

	* jit/jit-rules-x86.ins: simplify JIT_OP_RETURN_LONG rule, lift code
	from load_small_struct() function to JIT_OP_RETURN_SMALL_STRUCT rule.
	* jit/jit-rules-x86.c: remove load_small_struct() function.

2006-09-09  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c:
	* tools/gen-rules-parser.y: add _JIT_REGS_CLOBBER_STACK flag and use
	it in the code generated for "only" rules instead of the explicit
	stack top check followed by the _jit_regs_spill_all() call.

2006-09-02  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-interp.c (_jit_run_function):
	* jit/jit-rules-interp.c (_jit_gen_insn): remove last traces of
	register allocation from the interpreter.

2006-08-31  Klaus Treichel  <ktreichel@web.de>

	* configure.in: Replace the deprecated AM_PROG_LIBTOOL with the current
	AC_PROG_LIBTOOL.

	* jitdynamic/Makefile.am, jitplus/Makefile.am: Add -no-undefined to the
	LDFLAGS to enable building cygwin/mingw dlls.

2006-08-31  Aleksey Demakov  <ademakov@gmail.com>

	* tools/gen-rules-scanner.l, tools/gen-rules-parser.y: add "frame"
	keyword that is just like "local" but forces the value out from the
	register into the stack frame.

	* jit/jit-rules-x86.ins: rewrite JIT_OP_COPY_STORE_BYTE,
	JIT_OP_ADDRESS_OF, and JIT_OP_COPY_STORE_SHORT rules using the
	"frame" keyword.

	* jit/Makefile.am, jit/jit-rules-x86.c: remove all references to
	jit-rules-x86.sel and jit-rules-x86.slc.

	* jit/jit-rules-x86.c: remove mov_memindex_reg_byte() and
	widen_byte() functions.

2006-08-30  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-interp.h, jit/jit-interp.c, jit/jit-opcode.c,
	jit/jit-rules-interp.h, jit/jit-rules-interp.c: major change in the
	internal interpreter instruction set. Now the stack is used only for
	function arguments. There are three pseudo-registers used instead of
	the stack for operands. One is used for the destination value, two
	others are used for the source values. The destination register is
	spilled after each instruction. This scheme obviates the need for
	register allocation for the interpreter backend.

	* jit/jit-function.c (jit_function_compile, compile_block): do not
	make register allocator calls if JIT_BACKEND_INTERP is defined.

2006-08-29  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-function.c (jit_function_from_pc): fix problem with wrong
	exception handler address for interpreter.

	* jit/jit-insn.c (jit_insn_return, jit_insn_return_ptr): do not pop
	the setjmp context for the interpreter backend because it takes care
	of this by itself.

	* jit/jit-rules.h, jit/jit-rules-alpha.c, jit/jit-rules-arm.c,
	* jit/jit-rules-interp.c, jit/jit-rules-x86.c, jit/jit-reg-alloc.c:
	move part of the _jit_gen_exch_top() functionality into a separate
	_jit_gen_move_top() function.

	* include/jit/jit-opcode.h:
	* jit/jit-opcode.c: add JIT_OPCODE_IS_JUMP_TABLE flag to mark the
	JIT_OP_JUMP_TABLE opcode.

	* jit/jit-dump.c (jit_dump_insn, dump_interp_code): add jump table
	dumping.

2006-08-28  Klaus Treichel  <ktreichel@web.de>

	* dpas/Makefile.am, jit/Makefile.am, tests/Makefile.am: Add missing
	sources to fix creation of tarballs (make dist).

2006-08-25  Yan Burman  <yan_952@hotmail.com>

	* jitdynamic/jit-cpp-mangle.c (mangle_type_gcc3): fix typo in
	is_unsigned usage (patch #5324)

2006-08-23  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-apply-alpha.c jit/jit-apply-alpha.h: Fix jit_redirector_size.
	alpha_call is 6 instructions, not 1. 5 to load the addr, 1 to call.

	* jit/jit-gen-alpha.h: add macros for fp sign copy and arithmetic.

	* jit/jit-rules-alpha.c: remove TODO() from unused functions.

2006-08-23  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-internal.h (struct _jit_function): change the type of
	redirector and indirector fields from char array to pointer.
	* jit/jit-function.c (jit_function_create): allocate the redirector
	and indirector buffers in the code cache. Call jit_flush_exec on
	these buffers. This fixes problems on alpha and some x86 linux
	distros. [This one is based on the initial solution suggested by
	Kirill Kononenko <Kirill.Kononenko@gmail.com>].

	* jit/jit-rules-x86.c (_jit_gen_redirector): ifdef out as this
	function is not used with the x86 backend.

	* jit/jit-reg-alloc.c: improve handling of three-address op codes.
	Now the dest register may re-use one of the input registers while
	previously it was always assigned to a separate register. Also
	restructure the code that will be used for better selection of x87
	instructions (this code was not used before and still is not but
	this is about to change).

	* jit/jit-rules-x86.ins: rewrite all LOAD_RELATIVE and LOAD_ELEMENT
	ops for x86 as three-address. Adjust IREM ops so that they work
	correctly together with the latest allocator changes.

2006-08-22  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-alloc.c: Use mmap and munmap to allocate executable memory
	where available because memory allocated with malloc is not executable
	on some archs/distros.

2006-08-21  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-rules-alpha.c jit/jit-gen-alpha.h: Add macros for
	int to fp and fp to int conversions. Use _jit_pad_bufer.

2006-08-20  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-apply-alpha.c jit/jit-apply-alpha.h jit/jit-rules-alpha.h
	jit/jit-rules-alpha.ins jit/jit-rules-alpha.c jit/jit-gen-alpha.h:
	Remove unnecessary code from the prolog, epilog, redirector, and
	closure. Implement > and >= opcodes for signed and unsigned values.

2006-08-19  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (set_regdesc_flags): fix a problem with the
	clobber	flag being ignored. The problem was introduced by the patch
	from 2006-06-17.

2006-08-15  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-rules-alpha.c jit/jit-rules-alpha.h jit/jit-rules-alpha.ins
	Add a TODO() macro to print unimplemented warnings. Fix some 
	casting warnings. Implement _jit_gen_redirector(...). Fix
	JIT_CDECL_WORD_REG_PARAMS to use the correct parameter 
	registers. Add some stack push and pop instructions.

2006-08-15  Kirill Kononenko  <Kirill.Kononenko@gmail.com>

	* configure.in: add --enable-signals option;
	* jit/Makefile.am: add jit/jit-signal.c;
	* jit/jit-signal.c, jit/jit-internal.h: add _jit_signal_init();
	* jit/jit-init.c: call _jit_signal_init() if JIT_USE_SIGNALS is
	defined. (patch #5278.)

2006-08-11  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-rules-alpha.c jit/jit-rules-alpha.ins Properly handle
	fixups on alpha. Implement JIT_OP_CALL_EXTERNAL for alpha.

2006-07-29  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (use_cheapest_register): allow a register that
	contains an input value to be used as a scratch register. The input
	value in this case is copied to another register. This resolves the
	problem with JIT_OP_IREM rule that failed to allocate a scratch reg
	in a very specific case (all EBX, ESI, EDI regs are used as global,
	dividend is initially in ECX and copied to EAX:EDX pair where x86
	idiv expects it to be).

	* jit/jit-reg-alloc.c (set_regdesc_flags): fix a bug.

2006-07-23  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-apply-alpha.c jit/jit-apply-alpha.h jit/jit-apply-func.h
	jit/jit-gen-alpha.h jit/jit-rules-alpha.c jit/jit-rules-alpha.h
	jit/jit-rules-alpha.ins Implement the redirector for alpha. 
	Continue to implement more functions in jit/jit-rules-alpha.c.

2006-07-15  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-apply-alpha.c jit/jit-gen-alpha.h jit/jit-rules-alpha.h
	jit/jit-rules-alpha.c: Implement closure for alpha. Use jsr 
	instead of bsr in alpha_call. Clean up prolog and epilog 
	generation for alpha to be more readable.

2006-07-13  Thomas Cort  <linuxgeek@gmail.com>

	* jit/jit-gen-alpha.h jit/jit-rules-alpha.c jit/jit-rules-alpha.h:
	Added trap barrier macro alpha_trapb. Implemented 
	_jit_gen_prolog and _jit_gen_epilog for alpha.

2006-07-12  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_move_blocks_to_start): fix problem with
	wrong order of blocks that were moved from the position just after
	the init_block and with disappearance of blocks after the empty
	init_block.

2006-07-12  Thomas Cort  <linuxgeek@gmail.com>

	* README.alpha jit/Makefile.am jit/jit-apply-alpha.c 
	jit/jit-apply-alpha.h jit/jit-elf-defs.h jit/jit-gen-alpha.h
	jit/jit-rules-alpha.c jit/jit-rules-alpha.h 
	jit/jit-rules-alpha.ins /jit/jit-rules.h: Initial import of the
	code for the alpha port.

2006-07-06  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: fix division by power of two.

2006-07-05  Aleksey Demakov  <ademakov@gmail.com>

	* configure.in: make new register allocator the default.

	* jit/jit-reg-alloc.c (is_register_alive, compute_spill_cost): fix
	problem with destroying the end register of a long pair.

2006-07-03  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: add JIT_OP_LOW_WORD, JIT_OP_EXPAND_INT,
	JIT_OP_EXPAND_UINT, JIT_OP_INT_TO_NFLOAT, JIT_OP_UINT_TO_NFLOAT,
	JIT_OP_LONG_TO_NFLOAT, JIT_OP_ULONG_TO_NFLOAT and rewrite
	JIT_OP_TRUNC_SBYTE, JIT_OP_TRUNC_UBYTE, JIT_OP_LOAD_PC rules.

	* jit/jit-rules-x86.c (_jit_opcode_is_supported): include .inc file
	instead of .slc if USE_NEW_REG_ALLOC is defined.

2006-06-28  Aleksey Demakov  <ademakov@gmail.com>

	* tools/gen-rules-parser.y (gensel_output_code): 
	* jit/jit-rules-x86.ins: use $1 for dest register instead of $0
	for consistency.

2006-06-27  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (accumulate_relative_offset): add function that
	accumulates JIT_OP_ADD_RELATIVE offsets.
	(jit_insn_store_relative, jit_insn_load_relative)
	(jit_insn_add_relative): use accumulate_relative_offset() instead
	of previous_relative() to find the offset from the original address
	and do not replace the accumulated instructions with JIT_OP_NOP as
	it was before. The old approach is problematic because it is unknown
	at this point if the values we accumulated are dead or they will be
	used by instructions added later. The dead code elimination pass
	removes unused values just as well but with enough knowledge to	be
	safe. The new code also does not move JIT_OP_ADDRESS_OF towards	the
	relative instructions that uses the address. Supposedly such move
	may be used by the code generator as a hint. However currently the
	code generator does not use such a hint. The old code is kept for
	reference #ifdefed out.

2006-06-17  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: implement support of the
	JIT_REGS_FREE_DEST flag for 3-argument instructions. Tweak reg alloc
	API.

	* tools/gen-rules-parser.y: adjust for reg alloc API changes. Use
	'$0' pattern element to refer to destination register in 3-argument
	instructions.

	* jit/jit-rules-x86.ins: rewrite JIT_OP_IDIV, JIT_OP_IDIV_UN,
	JIT_OP_IREM, JIT_OP_IREM_UN, JIT_OP_ADDRESS_OF_LABEL,
	JIT_OP_LOAD_RELATIVE_FLOAT32, JIT_OP_LOAD_RELATIVE_FLOAT32,
	JIT_OP_LOAD_RELATIVE_NFLOAT, JIT_OP_LOAD_ELEMENT_FLOAT32,
	JIT_OP_LOAD_ELEMENT_FLOAT64, JIT_OP_LOAD_ELEMENT_NFLOAT rules.

2006-06-16  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel, jit/jit-rules-x86.ins: fix JIT_OP_IDIV	and
	JIT_OP_IREM rules for the divisor value of -1.

2006-06-09  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: rewrite JIT_OP_STORE_RELATIVE_BYTE,
	JIT_OP_STORE_RELATIVE_SHORT, JIT_OP_STORE_RELATIVE_LONG,
	JIT_OP_STORE_RELATIVE_FLOAT32, JIT_OP_STORE_RELATIVE_FLOAT64,
	JIT_OP_STORE_RELATIVE_NFLOAT, JIT_OP_STORE_ELEMENT_LONG,
	JIT_OP_STORE_ELEMENT_NFLOAT rules to use regular pattern
	syntax instead of manual.

2006-06-03  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: remove _jit_regs_free_reg() call from
	JIT_OP_RETURN_FLOAT32, JIT_OP_PUSH_FLOAT32, JIT_OP_RETURN_FLOAT64,
	JIT_OP_RETURN_NFLOAT, JIT_OP_PUSH_FLOAT64, and JIT_OP_PUSH_NFLOAT
	rules. With new ``gen-rules'' tool it frees wrong register and
	the right register is anyway freed automatically by the new
	allocator.

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c (_jit_regs_abort): add
	function to unbind values from registers if the code generation
	failed. This is required because new allocator may temporary bind
	constants to registers and if neither _jit_regs_commit() nor
	_jit_regs_abort() is called the constant value will be left in
	inconsistent state. The problem shows up when the end of a cache
	block has been reached and the compilation is restarted with a new
	block.

	* jit/jit-reg-alloc.c (_jit_regs_begin, _jit_regs_end):	add
	convenience functions.

	* tools/gen-rules-parser.y (gensel_output_clauses): make generated
	code more readable by using _jit_regs_begin() and _jit_regs_end()
	where appropriate.

	* jit/jit-reg-alloc.c: allow to load the second part of a register
	pair to a global register. This is because x86 long arithmetics
	use 4 registers at once: EAX:EDX and ECX:EBX. At the same time
	EBX is the global register candidate. If the instruction clobbers
	the global register, the new allocator automatically pushes it on
	the stack before and pops after the instruction.

	* jit/jit-function.c (compile_block): modify trace messages.

2006-05-28  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-insn.c: Add a code_label in initialize_setjmp_block just
	before the end_label that is moved with the block to the start of
	the function as jump target to the code. Otherwise other blocks
	moved to the start after this block will never be executed.

2006-05-27  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (free_value, save_value): the value that has
	a global register and is also associated with a local register
	needs to be unbound from the local one.

	* jit/jit-reg-alloc.c (compute_spill_cost): assume that the spill
	cost for clean values is not zero. This keeps them in registers
	as long as there are free registers and thus reduces the number of
	loads.
	
2006-05-25  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (use_cheapest_register): fix cost calculation
	again for 'spill_before' rules. The last patch did not work for
	values stored in global registers. Now both global and non-global
	values should be copied to EAX.

2006-05-25  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (use_cheapest_register): fix cost calculation
	that sometimes caused overlooking free registers. This was a serious
	problem as there are some 'spill_before' rules that assume that the
	allocator will always choose EAX as the first free register.

2006-05-21  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h: add _JIT_REGS_FREE_DEST flag to be used in
	cases when the destination register is independent of any input
	register.
	* tools/gen-rules-parser.y: allow specification	of independent
	destination register with '=reg' pattern syntax. (But the allocator
	does not yet handle this.)

2006-05-20  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.c (_jit_gen_exch_top): fix computation of stack
	register index.

	* jit/jit-reg-alloc.c (_jit_regs_assign): micro optimization by
	changing nesting order of for and if statements.

2006-05-19  Aleksey Demakov  <ademakov@gmail.com>

	* jit-reg-alloc.h, jit/jit-reg-alloc.c: determine if input values
	need to be saved and evicted from registers to stack frame at the
	_jit_regs_assign() time. Uniformly save input values that need to
	in _jit_regs_gen(), do not save them in _jit_regs_commit(). This
	simplifies handling of stack registers. Remove initial_stack_top,
	exchanges, num_exchages fields from the _jit_regs_t struct. Add
	save and kill bit fields to the _jit_regdesc_t struct. Refactor
	and clean up code.

2006-05-10  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (use_cheapest_register): check if the other
	part of a register pair clobbers global registers.

	* jit/jit-reg-alloc.c (exch_stack_top): run value exchange loop
	for all values in both registers.

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: delete on_stack field
	from the _jit_regdesc_t struct.

	* jit/jit-reg-alloc.c (_jit_regs_gen): handle instructions that have
	both stack and flat registers.

	* jit/jit-reg-alloc.c (spill_value): spilling an input value remember
	if we do register exchanges for other values.

	* jit/jit-reg-alloc.c: set touched registers more accurately.

2006-05-08  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.c (commit_input_value, commit_output_value):
	fix extra spills introduced at 2006-05-05.

	* jit/jit-rules-x86.c (_jit_gen_spill_top): add missing
	jit_cache_end_output().

2006-05-05  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: fix spilling and many
	problems with stack registers.

2006-05-04  Radek Polak  <psonek2@seznam.cz>

	* jit/jit-dump.c (dump_object_code): Now can dump to any stream
	not just stdout and stderr.

2006-05-01  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel, jit/jit-rules-x86.ins: fix problem with
	spilling dest register in JIT_OP_ADDRESS_OF rule.

	* jit/jit-rules-x86.ins: rewrite JIT_OP_STORE_RELATIVE_INT rule.

2006-04-23  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: register allocator now
	supports register sets that constrain the register assignment.

	* tools/gen-rules-parser.y: extend grammar to support register sets.
	Fix bugs.

	* jit/jit-rules-x86.ins: take advantage of new register allocator
	for JIT_OP_MEMORY, JIT_OP_MEMOVE, JIT_OP_MEMESET rules.

2006-04-20  Aleksey Demakov  <ademakov@gmail.com>

	* tools/gen-rules-parser.y: fix generation of `if' pattern code.

2006-04-19  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.c (_jit_gen_load_value): fix compiler warning.

	* tools/gen-rules-parser.y (gensel_output_clauses): fix generation
	of clobber and scratch code.

	* tools/gen-rules-scanner.l, tools/gen-rules-parser.y: add `any'
	keyword.

2006-04-18  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.ins: add instruction selection rules for new
	register allocator.
	* jit/Makefile.am: build new instruction selection rules.
	* configure.in: add --enable-new-reg-alloc option.

2006-04-14  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h, jit/jit-reg-alloc.c: new register allocator
	improved and extended to support stack registers.

	* jit/jit-internal.h (struct _jit_builder): 
	* jit/jit-function.c (compile_block, jit_function_compile): add
	some tracing.

	* jit/jit-rules.h:
	* jit/jit-rules-arm.c:
	* jit/jit-rules-interp.c: 
	* jit/jit-rules-x86.c: add _jit_gen_exch_top and _jit_gen_spill_top
	functions used by new allocator to handle stack registers. Add reg
	argument to _jit_gen_spill_global and_jit_gen_load_global
	functions.

2006-04-11  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_start_catcher): initialize
	thrown_exception (the problem was found by Klaus).

2006-04-08  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-opcode.c: add jump table into jit_opcodes array.

	* tools/gen-rules-parser.y: extend pattern syntax to allow mark
	  registers as clobbered. Fix bugs.

2006-04-07  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-internal.h (struct _jit_function): add indirector field.
	* jit/jit-function.c (jit_function_compile, jit_function_create):
	  use indirector.
	* jit/jit-apply-x86.h: define jit_indirector_size.
	* jit/jit-apply-func.h, jit/jit-apply-x86.c (_jit_create_indirector):
	  add function that emits indirector code.

2006-04-07  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (create_call_setup_insns): zero struct_return
	in case of tail calls (the problem was found by Klaus).

2006-04-03  Aleksey Demakov  <ademakov@gmail.com>

	* tools/gen-rules-scanner.l:
	* tools/gen-rules-parser.y: add `reversible', `x87arith',
	  and `copy' keywords. Fix bugs.

2006-03-23  Klaus Treichel  <ktreichel@web.de>

	* jit/jitc-except.c: Walk the stack to build the stack trace in
	jit_exception_get_stack_trace when the frame is not broken.

2006-03-23  Aleksey Demakov  <ademakov@gmail.com>

	* tools/Makefile.am: 
	* tools/gen-rules-parser.y, tools/gen-rules-scanner.l: add
	"gen-rules" tool that is similar to "gen-sel" but uses new
	register allocator.

2006-03-12  Klaus Treichel  <ktreichel@web.de>

	* jit/jit-insn.c: Pop the setjump context on return from functions
	with a catcher.

2006-03-11  Kirill Kononenko  <Kirill.Kononenko@gmail.com>

	* jit/jit-insn.c (create_call_setup_insn): fix tail calls, work
	if the called function is not the callee function
	(thanks klausT for finding the bug).

2006-02-27  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_convert): fix int->uint and uint->int
	conversion.

2006-02-26  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel: fix JIT_OP_STORE_RELATIVE_LONG.

	* jit/jit-gen-x86.h (x86_pop_mem, x86_pop_membase): fix opcode --
	  it was 0x87 (xchg) instead of 0x8f (pop).

2006-02-24  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_address_of_label): fix a typo.
	* jit/jit-rules-x86.sel: fix JIT_OP_ADDRESS_OF_LABEL rule.

2006-02-20  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.c (_jit_create_call_return_insns): fix return
	code in case of no return value or struct returned via pointer.

2006-02-19  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-reg-alloc.h: 
	* jit/jit-reg-alloc.c: Initial version of new local register
	  allocator.

	* jit/jit-rules.h: 
	* jit/jit-rules-arm.c (_jit_gen_spill_global): 
	* jit/jit-rules-interp.c (_jit_gen_spill_global): 
	* jit/jit-rules-x86.c (_jit_gen_spill_global): add function for
	spilling global registers. Used by the new allocator. Only x86
	version is really implemented.

2006-02-13  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-internal.h (struct _jit_value): add index field.
	* jit/jit-value.c (alloc_value): initialize index field;
	* jit/Makefile.am (libjit_la_SOURCES): add jit-bitset.c and jit-cfg.c.

2006-02-12  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel: fix JIT_OP_CALL_FINALLY.

2006-02-10  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-bitset.c: 
	* jit/jit-bitset.h: 
	* jit/jit-cfg.c:
	* jit/jit-cfg.h: initial code drop for a more precise liveness
	analysis based on control flow graph.

2006-02-04  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel: fix a typo in JIT_OP_JUMP_TABLE.

2006-01-30  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.c (_jit_gen_load_value): optimize loading
	of zero constants. Allow to move a value from one register to
	another.

2006-01-15  Rhys Weatherley  <rweather@southern-storm.com.au>

	* configure.in, NEWS: update version for the "0.0.6" release.

	* configure.in: updating working version to "0.0.7".

2006-01-14  Aleksey Demakov  <ademakov@gmail.com>

	* tools/gen-sel-parser.y: spilling a register which is the first
	part of a register pair spill the other part too.

	* jit/jit-reg-alloc.c (free_register_for_value):
	* jit/jit-rules-x86.sel: if a register is the second part of a
	register pair do not consider it free.

2006-01-13  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c: fix all descriptors of intrinsic functions that
	return an exception code to have return_type equal to
	_jit_type_int_def.

	* jit/jit-dump.c (dump_object_code): fix object file extension.

2006-01-11  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-gen-x86.h (x86_jump_memindex): add macro for indirect
	jumps.
	* jit/jit-internal.h, jit/jit-function.c, jiy/jit-rules-x86.c:
	add fixup_absolute_list field to _jit_block struct for fixing up
	absolute address references to a block.
	* include/jit/jit-opcode.h, include/jit/jit-insn.h, jit/jit-insn.c
	(jit_insn_jump_table), jit/jit-rules-x86.sel, jit/jit-rules-interp.c
	(_jit_gen_insn), jit/jit-interp.c (_jit_run_function):
	add JIT_OP_JUMP_TABLE opcode.

2006-01-08  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-apply-x86.h (jit_builtin_return_int): change definition
	to dereference the return_buf argument and use leal instead of movl.
	This fixes builds with gcc 4.0.2.

2005-12-28  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel: implement JIT_OP_MEMMOVE rule. Get rid of
	compiler warnings in JIT_OP_MEMSET.

2005-12-24  Avinash Atreya  <avinashatreya@gmail.com>

	* dpas/dpas-parser.y: implement array expressions (committed by Aleksey
	Demakov, jit_insn_throw replaced with throw_builtin_exception)

2005-12-24  Aleksey Demakov  <ademakov@gmail.com>

	* include/jit/jit-except.h, jit/jit-except.c (jit_exception_builtin): 
	add JIT_RESULT_OUT_OF_BOUNDS builtin exception type code.

	* dpas/dpas-parser.y (throw_builtin_exception): add static function
	that makes jit_exception_builtin call.

	* jit/jit-cache.c (_jit_cache_get_start_method): add function that
	for an address in cache returns the start address of the block that
	contains it.
	* jit/jit-except.c (jit_stack_trace_get_offset): use
	_jit_cache_get_start_method function instead of cache_start field.
	* jit/jit-internal.h, jit/jit-function.c (jit_function_compile):
	remove cache_start field to the jit_function struct.

2005-12-22  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-rules-x86.sel: implement JIT_OP_MEMSET and JIT_OP_MEMCPY
	rules optimized	for small constant size blocks.

2005-12-20  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-gen-x86.h (x86_fld_memindex, x86_fld80_memindex)
	(x86_fst_memindex, x86_fst80_memindex): add floating point load
	and store macros with memindex addressing.

	* jit/jit-rules-x86.sel: optimize floating point element load
	and store rules. Fix potential register allocation problems.

2005-12-18  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-internal.h, jit/jit-function.c (jit_function_compile):
	Add cache_start field to the jit_function struct, set it to the start
	of the function code cache.

	* jit/jit-except.c (jit_stack_trace_get_offset): implement the
	function.

2005-12-15  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-insn.c (jit_insn_address_of): return null if the value is
	constant.

2005-12-15  Avinash Atreya  <avinashatreya@gmail.com>

	* jit/jit-insn.c: Store constants to a temporary to obtain
	address of constant values (Gopal).

2005-12-13  Aleksey Demakov  <ademakov@gmail.com>

	* configure.in: Added --enable-long-double option that forces
	jit_nfloat to be long double.

	* jit/jit-apply-x86.h (jit_builtin_apply, jit_builtin_return_float):
	In gcc/Win32 and gcc/non-Win32 versions of the macros check the size
	of jit_nfloat and use fstpl/fldl or fstpt/fldt instructions
	accordingly.

	* tools/gen-apply.c (detect_float_return): On x86 only the first
	10 bytes of 12 byte long doubles are significant and are used for
	comparison.

2005-12-12  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-dump.c (dump_object_code): in order to make dump work on
	cygwin call "as" and "objdump" in two separate system() calls because
	it looks like the ';' separator between commands does not work there.
	Also on Win32 use TMP and TEMP environment variables as the tmp
	directory names and fallback to "c:/tmp".

	* jit/jit-gen-x86.h (jit_assert): change the macro definition to
	resolve	problems introduced at 2005-12-10.

2005-12-10  Aleksey Demakov  <ademakov@gmail.com>

	* jit/jit-gen-x86.h: Merged changes from the latest Mono project's
	version	of this file.

	* jit/jit-rules-x86.sel: Done the following rules:
	JIT_OP_LOAD_ELEMENT_FLOAT32, JIT_OP_LOAD_ELEMENT_FLOAT64,
	JIT_OP_LOAD_ELEMENT_NFLOAT, JIT_OP_STORE_ELEMENT_LONG,
	JIT_OP_STORE_ELEMENT_FLOAT32, JIT_OP_STORE_ELEMENT_FLOAT64,
	JIT_OP_STORE_ELEMENT_NFLOAT.

2005-11-19  Klaus Treichel  <ktreichel@web.de>

	* jit/apply-x86-64.h: Change definition of JIT_MEMCPY from "jit_memcpy" to
	"jit_memcpy@PLT" to fix the build of a shared library for x86_64.

2004-11-18  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-opcode.h, jit/jit-dump.c, jit/jit-insn.c,
	jit/jit-interp.c, jit/jit-opcode.c, jit/jit-rules-interp.c,
	jit/jit-rules-x86.sel: implement tail calls properly.

2004-11-05  Evin Robertson  <evin@users.sourceforge.net>

	* jit/jit-insn.c (jit_insn_store): use the destination type
	to determine the store opcode, not the source value type.

2004-11-02  Evin Robertson  <evin@users.sourceforge.net>

	* jit/jit-function.c (jit_function_compile): clear block addresses
	and fixup lists if we need to restart on a new cache page (minor
	alterations by Rhys).

	* jit/jit-function.c (jit_function_apply_vararg): return 0 when a
	sub-function throws an exception, not 1.

2004-10-31  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-x86.sel: handle the special case of constant
	destination pointers in "store_relative" instructions, because
	otherwise the register allocator gets confused.

2004-10-29  Peter Lund <firefly@diku.dk>

	* doc/libjit.3: fix manpage formatting issues. (patch attached
	to bug #10779, Gopal).

2004-10-28  Rhys Weatherley  <rweather@southern-storm.com.au>

	* configure.in, jit/jit-debugger.c, jit/jit-thread.c,
	jit/jit-thread.h: implement some of the locking code
	for the debugging API.

2004-10-12  Evin Robertson  <evin@users.sourceforge.net>

	* jit/jit-rules-x86.c (output_branch): correct the offset
	when outputting a long-form backward branch.

	* tests/Makefile.am, tests/loop.pas: test case for the
	long-form backward branch bug.

2004-10-06  Rhys Weatherley  <rweather@southern-storm.com.au>

	* doc/Makefile.am, doc/libjit.texi, include/jit/Makefile.am,
	include/jit/jit-common.h, include/jit/jit-context.h,
	include/jit/jit-debugger.h, include/jit/jit-except.h,
	include/jit/jit-function.h, include/jit/jit.h, jit/Makefile.am,
	jit/jit-context.c, jit/jit-debug.c, jit/jit-debugger.c,
	jit/jit-insn.c, jit/jit-internal.h, jit/jit-interp.c:
	redesign the debugger API so that it contains functions
	like "add breakpoint", "run", "step", etc that more closely resemble
	what a front end debugger will want to have, shifting the
	implementation burden off the front end.

2004-10-04  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-function.h, include/jit/jit-insn.h,
	include/jit/jit-opcode.h, include/jit/jit-plus.h, jit/jit-function.c,
	jit/jit-insn.c, jit/jit-internal.h, jit/jit-interp.c,
	jit/jit-opcode.c, jit/jit-rules-interp.c, jit/jit-rules-arm.sel,
	jit/jit-rules-x86.sel, jitplus/jit-plus-function.cpp:
	add instructions and function API's for supporting debug line
	numbers and breakpoints.

	* doc/Makefile.am, doc/libjit.texi, include/jit/jit-context.h,
	include/jit/jit-insn.h, include/jit/jit-opcode.h,
	include/jit/jit-plus.h, jit/Makefile.am, jit/jit-context.c,
	jit/jit-debug.c, jit/jit-function.c, jit/jit-insn.c,
	jit/jit-internal.h, jit/jit-interp.c, jit/jit-opcode.c,
	jit/jit-rules-arm.sel, jit/jit-rules-interp.c, jit/jit-rules-x86.sel,
	jitplus/jit-plus-function.cpp: clean up the breakpoint API and
	implement debug hooks for the interpreter.

	* jit/jit-insn.c, jit/jit-rules-arm.sel, jit/jit-rules-x86.sel:
	use a common helper function for performing debug hook tests on
	native platforms, to avoid the need to implement breakpoint testing
	individually in every native back end.

2004-09-10  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-x86.sel: pointer-relative loads and stores
	for structures in the x86 back end.

2004-09-09  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-x86.c, jit/jit-rules-x86.sel: add some support
	for structure copying to the x86 back end.

2004-09-06  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-interp.c: the pointer value for indirect and vtable
	calls was being pushed onto the stack twice.

2004-09-05  Norbert Bollow  <nb@SoftwareEconomics.biz>

	* samples/hellovm.c: add a sample program that demonstrates a
	simple VM based on libjit (committed by Rhys).

2004-08-30  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit-rules-x86.sel: fix x86 code generation for floating-point
	return instructions.

2004-08-16  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-cpuid-x86.c (cpuid_query): use %ebx in a way that doesn't
	confuse PIC mode in some versions of gcc (bug #10022).

2004-08-13  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-insn.h, include/jit/jit-opcode.h,
	include/jit/jit-plus.h, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-interp.h, jit/jit-opcode.c, jit/jit-rules-interp.c,
	jitplus/jit-plus-function.cpp: re-implement the "push_return_area_ptr"
	patch so as to avoid wasting stack space in functions with more
	than one native function call.

2004-08-12  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-interp.c: account for the extra value that is
	added to the stack by the "push_return_area_ptr" instruction.

2004-08-08  Rhys Weatherley  <rweather@southern-storm.com.au>

	* configure.in, NEWS: update version for the "0.0.4" release.

	* configure.in: updating working version to "0.0.5".

2004-08-05  Rhys Weatherley  <rweather@southern-storm.com.au>

	* doc/Makefile.am, doc/README, doc/libjit.texi,
	jit/jit-dump.c, jit/jit-insn.c: documentation updates.

	* dpas/Makefile.am, tools/Makefile.am: support for parallel builds.

2004-08-04  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-opcode.c: fix the operand types for "call_vtable_ptr".

2004-06-25  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/gen-apply.c: fix a crash in gen-apply under x86-64.

	* jit/jit-apply-func.h, jit/jit-apply-x86-64.h, tools/gen-apply.c:
	write an x86-64 assembly version of "__builtin_apply", because
	the version inside gcc has an unusable register ordering.

2004-06-24  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-reg-alloc.c, jit/jit-rules-arm.h, jit/jit-rules-interp.c,
	jit/jit-rules-interp.h, jit/jit-rules-x86.h, jit/jit-rules.h:
	use separate JIT_REG_xxx flags for float32, float64, and nfloat
	because some platforms need to put these values in different
	types of registers (e.g. x86-64).

2004-06-22  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-insn.c: properly set the "may_throw" flag for opcodes
	that throw exceptions and which are also supported by the back end.

2004-06-21  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-x86.c, jit/jit-rules-x86.sel: move the code
	for loading/storing small structures into a central location.

2004-06-18  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-dump.c, jit/jit-reg-alloc.c, jit/jit-rules-arm.c,
	jit/jit-rules-arm.h, jit/jit-rules-x86.c, jit/jit-rules-x86.h,
	jit/jit-rules-x86.sel, jit/jit-rules.c, jit/jit-rules.h,
	tests/param.pas: rewrite the x86 and ARM parameter handling
	routines to centralise the code and fix several bugs; add new
	tests for fastcall and stdcall conventions.

2004-06-17  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-reg-alloc.c (_jit_regs_set_outgoing): pass 64-bit "fastcall"
	parameters in ECX:EDX, not in ECX:EBX.

	* tools/gen-apply.c: allow floating-point values to be passed
	in "fastcall" registers.

2004-06-16  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/gen-sel-parser.y: add a missing semi-colon.

2004-06-14  Rhys Weatherley  <rweather@southern-storm.com.au>

	* dpas/dpas-internal.h, dpas/dpas-parser.y, dpas/dpas-scanner.l,
	jit/jit-rules-x86.c, jit/jit-rules-x86.sel, tests/Makefile.am,
	tests/param.pas, tools/gen-apply.c: add some test cases for
	parameter passing; fix fastcall/stdcall conventions for x86.

	* jit/jit-rules-arm.h, jit/jit-rules-arm.sel, jit/jit-rules-x86.h,
	jit/jit-rules-x86.sel, tools/gen-sel-parser.y: enable register
	allocation for 64-bit values under x86 and ARM; expand some
	64-bit opcodes in the instruction selectors.

2004-06-12  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-insn.c, jit/jit-rules-x86.c, jit/jit-rules-x86.sel:
	implement or stub missing x86 instruction selection rules.

	* include/jit/jit-insn.h, include/jit/jit-opcode.h,
	include/jit/jit-plus.h, jit/jit-function.c, jit/jit-insn.c,
	jit/jit-interp.c, jit/jit-opcode.c, jit/jit-rules-interp.c,
	jitplus/jit-plus-function.cpp: add the "outgoing_frame_posn"
	instruction, to support tail calls.

2004-06-11  Rhys Weatherley  <rweather@southern-storm.com.au>

	* doc/libjit.texi, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-reg-alloc.c, jit/jit-rules-arm.c, jit/jit-rules-arm.sel,
	jit/jit-rules-interp.c, jit/jit-rules-x86.c, jit/jit-rules-x86.sel,
	jit/jit-rules.h, jit/jit-value.c, tutorial/Makefile.am,
	tutorial/t2.c, tutorial/t5.c: implement tail calls from a
	function to itself.

	* jit/jit-function.c, jit/jit-reg-alloc.c, jit/jit-rules-arm.c,
	jit/jit-rules-interp.c, jit/jit-rules-x86.c, jit/jit-rules.h:
	implement global register allocation for parameters in stack slots.

	* jit/jit-rules-x86.c, jit/jit-rules-x86.sel, jit/jit-rules.h:
	optimize the x86 function epilog when we are certain that the
	stack height doesn't change between entry and exit (i.e. the
	function is a leaf and there are no alloca's).

2004-06-10  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-apply-arm.c, jit/jit-gen-arm.c, jit/jit-gen-arm.h,
	jit/jit-rules-arm.c, jit/jit-rules-arm.h, jit/jit-rules-arm.sel,
	tools/gen-sel-parser.y: redesign the ARM code generation macros
	so that they have stronger protection against buffer overruns.

	* jit/jit-rules-arm.sel: flush the constant pool after unconditional
	branches, to try to minimize the probability that the pool will
	be flushed in the middle of a loop body.

	* jit/jit-dump.c: dump the hex address of external functions,
	to aid with debugging native disassembly dumps.

	* include/jit/jit-insn.h, include/jit/jit-opcode.h,
	include/jit/jit-plus.h, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-interp.c, jit/jit-opcode.c, jit/jit-rules-arm.c,
	jit/jit-rules-arm.sel, jitplus/jit-plus-function.cpp:
	add support for outgoing parameter areas, which should reduce
	the overhead of function calls that involve stacked arguments
	on non-x86 platforms; use parameter areas in the ARM back end.

	* include/jit/jit-plus.h, include/jit/jit-value.h, jit/jit-insn.c,
	jit/jit-internal.h, jit/jit-reg-alloc.c, jit/jit-rules-x86.c,
	jit/jit-value.c: don't over-allocate x86 stack frames if
	EBX, ESI, and EDI don't need to be saved; don't perform global
	register allocation on stacked parameters because it confuses
	the register spill logic.

	* jit/jit-reg-alloc.c (_jit_regs_load_value): avoid unnecessary
	spills if a temporary value won't be used again in the current block.

2004-06-09  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-arm.c (flush_constants): update the instruction
	location after flushing the constant table.

	* jit/jit-gen-arm.h: fix some bugs in the encoding of floating-point
	load and store instructions.

	* jit/jit-gen-arm.c (_arm_alu_reg_imm): forgot to update the
	instruction pointer when loading the immediate value.

	* jit/jit-gen-arm.c: optimize the use of rotated immediate values.

	* jit/jit-rules-arm.c (_jit_gen_load_value): use ARM register pairs
	properly for "long" and "float64" values.

2004-06-08  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/Makefile.am, jit/jit-cpuid-x86.c, jit/jit-cpuid-x86.h:
	add an API for querying the x86 "cpuid" information.

	* include/jit/jit-opcode.h, jit/jit-interp.c, jit/jit-opcode.c:
	remove obsolete opcodes which violate "_jit_load_opcode"'s rules.

	* jit/jit-reg-alloc.c, jit/jit-rules-x86.c, jit/jit-rules-x86.sel:
	more x86 instruction selection rules.

	* jit/jit-reg-alloc.c (_jit_regs_set_outgoing): implement
	missing function.

	* jit/jit-gen-arm.h (arm_call): use a more efficient form of
	call for offsets beyond the simple target range.

	* jit/jit-rules-arm.sel, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: introduce conditional rules into "gen-sel"
	so that we can disable certain rules on ARM platforms that lack
	floating-point support.

	* jit/jit-rules-arm.c (_jit_gen_spill_reg): spill properly to
	global registers for ARM.

	* jit/jit-reg-alloc.c, jit/jit-rules-arm.c, jit/jit-rules-arm.sel,
	jit/jit-rules-x86.sel: minor register assignment bugs.

	* jit/jit-rules-arm.c: ARM parameters cannot be split between
	registers and the stack.

	* jit/jit-gen-arm.c, jit/jit-gen-arm.h, jit/jit-rules-arm.c,
	jit/jit-rules-arm.h, jit/jit-rules-arm.sel: implement a
	constant pool for ARM, which gets complicated constants out
	of the main stream of execution.

2004-06-08  Miroslaw Dobrzanski-Neumann  <mne@mosaic-ag.com>

	* jit/jit-alloc.c: fix ROUND_END_PTR so that it adds the size
	after casting to jit_nuint.

2004-06-07  Thong Nguyen  <tim@veridicus.com>

	* configure.in, jit/jit-insn.c: add "_setjmp" to the list of
	names to try to work around the "setjmp" macro (needed for Win32).

2004-06-07  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/gen-apply.c: gen-apply fixes for Alpha platforms.

	* jit/jit-interp.c: alignment problem with "push_const_float32"
	on 64-bit platforms.

	* jit/jit-intrinsic.c: work around a SIGFPE for sqrt(-1) on Alpha;
	it should return NaN instead.

	* jit/jit-value.c: fix a warning.

	* configure.in, jit/jit-insn.c: use "sigsetjmp" instead of
	"setjmp", because "setjmp" may be a macro on some systems.

	* jit-gen-arm.h: add floating-point instruction macros.

	* jit/jit-gen-arm.h, jit/jit-rules-arm.c, jit/jit-rules-arm.h,
	jit/jit-rules-arm.sel: expand floating-point instructions for ARM.

	* jit/jit-rules-x86.c: fix misnaming of jit_type_get_abi,
	jit_abi_stdcall, and jit_abi_fastcall.

	* tools/gen-apply-macosx.h, tools/gen-apply.c: bypass the
	auto-detection logic in gen-apply under MacOSX because
	it doesn't work with Apple's version of gcc.

	* tools/gen-apply.c: gen-apply fix for ia64.

	* jit/jit-alloc.c (jit_flush_exec): warning fix for ia64.

2004-06-06  Miroslaw Dobrzanski-Neumann  <mne@mosaic-ag.com>

	* jit/jit-alloc.c (jit_flush_exec): flush cache lines properly
	if the start is not on a line boundary.

2004-06-06  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-reg-alloc.c, jit/jit-reg-alloc.h, jit/jit-rules-arm.c,
	jit/jit-rules-arm.sel, jit/jit-rules-x86.c, jit/jit-rules-x86.sel:
	add some more instructions to the ARM back end; split some x86
	back end code out into common code for ARM to use as well.

2004-06-02  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-function.c, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-reg-alloc.c, jit/jit-reg-alloc.h, jit/jit-rules-arm.c,
	jit/jit-rules-arm.h, jit/jit-rules-interp.c, jit/jit-rules-interp.h,
	jit/jit-rules-x86.c, jit/jit-rules-x86.h, jit/jit-rules.h,
	jit/jit-value.c, tools/gen-sel-parser.y: implement a simple global
	register allocation policy, based on usage counts.

	* jit/jit-reg-alloc.c (_jit_regs_load_value): if a value is in a
	global register and it is not going to be destroyed by an instruction,
	then use the global register as the operand.

	* jit/jit-insn.c: recognise "t = a op b; a = t" and turn it
	into "a = a op b" to make it easier for back ends to recognise
	special idioms such as increments and decrements.

2004-06-01  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-cache.c, jit/jit-elf-read.c, tools/gen-apply.c:
	fix some gcc 3.x compile warnings.

	* jit/jit-rules-arm.c, jit/jit-rules-arm.sel: more instruction
	selection rules for ARM.

	* configure.in, jit/jit-rules.h: enable the x86 back end by
	default on platforms where it makes sense, and add the option
	"--enable-interpreter" to "configure".

2004-05-31  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-rules-x86.sel: optimize multiplications for x86.

	* jit/jit-rules-x86.c, jit/jit-rules-x86.sel, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: inline and optimize divisions for x86.

	* jit/jit-rules-x86.sel: throw exceptions correctly for "check_null".

2004-05-30  Rhys Weatherley  <rweather@southern-storm.com.au>

	* doc/libjit.texi: clarify the text that describes LLVM, at the
	request of Chris Lattner, LLVM's author.

	* jit/jit-insn.c (jit_insn_convert): use intrinsic functions
	for conversions when the back end doesn't support the opcode.

	* jit/jit-rules-x86.sel, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: improve instruction selection for
	floating-point "push" operations.

	* include/jit/jit-insn.h, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-rules-x86.c: add "jit_insn_defer_pop_stack" and
	"jit_insn_flush_defer_pop", to defer the popping of function
	call arguments as long as possible.

	* jit/jit-rules-x86.sel: fix a cpu vs non-cpu register problem
	in the floating-point "push" operations for x86.

2004-05-29  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-insn.c, jit/jit-reg-alloc.c, jit/jit-reg-alloc.h,
	jit/jit-rules-x86.c, jit/jit-rules-x86.sel: continue the
	x86 back end; particularly byte/short stores.

	* jit/jit-rules-x86.sel: stub out JIT_OP_RETURN_REG, which
	doesn't need any special handling for x86.

2004-05-27  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/gen-apply.c: split "detect_struct_conventions" up a bit
	more to (hopefully) prevent problems under MacOSX; fix a bug in
	the generation of "jit_apply_builder_align_regs" that affected
	ARM and PPC systems.

	* dpas/dpas-types.c (dpas_type_identical): treat "float64" and
	"nfloat" as identical on platforms whose "long double" type is
	the same as "double".

	* jit/jit-rules-x86.c, jit/jit-rules-x86.sel, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: relative loads and stores for x86.

2004-05-26  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-insn.c, jit/jit-rules-x86.c, jit/jit-rules-x86.sel,
	jit/jit-rules.h, tools/gen-sel-parser.y: fix some compile issues
	in the x86 native back end.

	* jit/jit-function.c, jit/jit-rules-x86.c, jit/jit-rules-x86.sel,
	tools/gen-sel-parser.y: more bug fixes for the x86 back end.

	* include/jit/jit-insn.h, include/jit/jit-plus.h, jit/jit-insn.c,
	jitplus/jit-plus-function.cpp: add "jit_insn_new_block" to simplify
	creating a new block that doesn't have an explicit label.

	* dpas/dpas-parser.y, include/jit/jit-block.h, jit/jit-block.c,
	jit/jit-insn.c: add "jit_block_current_is_dead" to simplify
	testing if the last block is reachable or not, taking empty
	trailing blocks into account.

	* jit/jit-rules-x86.c, jit/jit-rules-x86.sel, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: more selection cases for the x86 back end.

	* jit/Makefile.am, jit/jit-gen-arm.h, jit/jit-rules-arm.c,
	jit/jit-rules-arm.sel: add the beginnings of the instruction
	selector for ARM.

2004-05-25  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/.cvsignore, tools/Makefile.am, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: add the "gen-sel" program to the tree,
	to assist with building native instruction selectors.

	* jit/.cvsignore, jit/Makefile.am, jit/jit-rules-x86.c,
	jit/jit-rules-x86.sel, tools/gen-sel-parser.y: check in the
	initial instruction selector for x86 (incomplete).

	* jit/jit-rules-x86.sel, tools/gen-sel-parser.y,
	tools/gen-sel-scanner.l: selectors for branch instructions.

	* jit/jit-rules-x86.sel: selectors for call instructions.

2004-05-24  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-insn.h, include/jit/jit-opcode.h, jit/jit-block.c,
	jit/jit-dump.c, jit/jit-except.c, jit/jit-function.c, jit/jit-insn.c,
	jit/jit-internal.h, jit/jit-interp.c, jit/jit-interp.h,
	jit/jit-opcode.c, jit/jit-rules-arm.c, jit/jit-rules-interp.c,
	jit/jit-rules-x86.c, jit/jit-rules.h, jit/jit-setjmp.h:
	rewrite the exception region routines to make them easier
	to use from CLI and JVM style systems.

	* jit/jit-rules-interp.c (_jit_gen_start_block): set the address
	of the exception handler for interpreted code.

	* include/jit/jit-plus.h, jitplus/jit-plus-function.cpp:
	add missing functions to the C++ API.

2004-05-22  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-block.c (_jit_block_peephole_branch): don't allow
	conditional branches to cross an exception context boundary,
	because doing so will violate "finally" semantics.

	* dpas/dpas-parser.y, include/jit/jit-insn.h, jit/jit-function.c,
	jit/jit-insn.c, jit/jit-internal.h: rename "jit_insn_move_blocks"
	to "jit_insn_move_blocks_to_end" and add a new function
	"jit_insn_move_blocks_to_start" for creating initialization code.

	* include/jit/jit-opcode.h, jit/jit-except.c, jit/jit-function.c,
	jit/jit-insn.c, jit/jit-internal.h, jit/jit-interp.c, jit/jit-opcode.c,
	jit/jit-setjmp.h: modify the function call logic to use "setjmp"
	with native back ends.

2004-05-21  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-gen-arm.c, jit/jit-gen-arm.h: modify the ARM codegen
	macros so that they can be used for branch elimination.

	* include/jit/jit-except.h, jit/jit-except.cpp, jit/jit-function.c,
	jit/jit-insn.c, jit/jit-internal.h, jit/jit-interp.cpp,
	jit/jit-interp.h, jit/jit-setjmp.h: redesign the exception handling
	mechanism to use "setjmp" rather than C++ exceptions.

	* configure.in, doc/Makefile.am, doc/libjit.texi, dpas/Makefile.am,
	jit/Makefile.am, jit/jit-except.c, jit/jit-except.cpp,
	jit/jit-interp.c, jit/jit-interp.cpp, jitdynamic/Makefile.am:
	remove the last remaining C++ code from libjit.so so that
	it is now a pure C library.

	* include/jit/jit-insn.h, include/jit/jit-opcode.h,
	include/jit/jit-plus.h, jit/jit-insn.c, jit/jit-interp.c,
	jit/jit-opcode.c, jitplus/jit-plus-function.cpp:
	add the "jit_insn_alloca" instruction.

	* configure.in, jit/.cvsignore, jit/Makefile.am, jit/jit-interp.c,
	jit/mklabel.sh: use computed goto's in the interpreter if supported
	by the underlying compiler.

2004-05-20  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-value.h, jit/jit-insn.c, jit/jit-value.c:
	convert constant conditional branches such as "if true goto L" into
	unconditional branches.

	* jit/jit-block.c, jit/jit-internal.h, jit/jit-live.c,
	jit/jit-rules-interp.c: perform peephole optimization of
	branches to branches before live variable analysis, so that
	the back ends don't need to worry about jump threading.

	* jit/jit-block.c, jit/jit-live.c: treat dead blocks as empty
	when peepholing branches to the next block.

2004-05-15  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/gen-apply.c: fix a macro generation bug for Win32 systems.

	* jit/jit-reg-alloc.c: fix a compile bug.

2004-05-14  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/Makefile.am, include/jit/jit-objmodel-private.h,
	include/jit/jit-objmodel.h, include/jit/jit.h, jit/Makefile.am,
	jit/jit-objmodel.c: put some infrastructure in place to support
	pluggable object models.

2004-05-13  Rhys Weatherley  <rweather@southern-storm.com.au>

	* dpas/dpas-parser.y, dpas/dpas-types.c, dpas/dpas-types.h:
	put some infrastructure (incomplete) in place to support array
	index expressions.

	* configure.in, NEWS: update version for the "0.0.2" release.

	* configure.in: updating working version to "0.0.3".

2004-05-12  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jitdynamic/Makefile.am, jitplus/Makefile.am: use both .libs and
	non.libs versions of the so paths, because some versions of libtool
	add .libs implicitly and others don't.

	* dpas/dpas-builtin.c, dpas/dpas-parser.y, dpas/dpas-types.c,
	dpas/dpas-types.h: add the "SameType" and "SameShape" builtins,
	to assist with unit testing type coercions.

	* dpas/dpas-parser.y (IfTail): fix a bug that caused the "then"
	case of an "if" to fall through to the "else".

	* dpas/dpas-parser.y: resolve ea-based lvalues in operators.

	* include/jit/jit-defs.h.in: incorrect values for jit_max_int
	and jit_max_long.

	* dpas/dpas-scanner.l (dpas_parse_hex): ignore the 'H' on the
	end of a hexadecimal constant.

	* Makefile.am, configure.in, tests/.cvsignore, tests/Makefile.am,
	tests/coerce.pas: check in some initial infrastructure for the
	dpas-based test suite.

	* jit/jit-type.c (jit_type_promote_int): promote ubyte and ushort
	to uint, not int.

	* jit/jit-insn.c, tests/coerce.pas: more coercion test cases and fixes.

	* dpas/dpas-builtin.c, jit/jit-dump.c, jit/jit-value.c: add builtins
	for mathematical operations.

	* dpas/dpas-parser.y, jit/jit-interp.cpp, tests/Makefile.am,
	tests/math.pas: test cases and bug fixes for mathematical operations.

	* dpas/dpas-main.c, include/jit/jit-context.h, jit/jit-context.c,
	jit/jit-insn.c, tests/Makefile.am: add the "--dont-fold" option
	to Dynamic Pascal, so that we can run the test cases without folding.

	* tests/README: add a README file to describe how to write test cases.

2004-05-11  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-insn.h, jit/jit-insn.c, jit/jit-interp.cpp,
	jit/jit-interp.h, jit/jit-opcode.c, jit/jit-rules-interp.c:
	round out the function call handling opcodes for the interpreter.

	* jit/jit-rules-interp.c, jit/jit-rules-interp.h: implement
	the exception-handling opcodes for the interpreter.

	* dpas/dpas-parser.y, dpas/dpas-scope.c, dpas/dpas-scope.h:
	fix a bug that caused global variables in Dynamic Pascal
	to be incorrectly allocated as locals.

	* jit/jit-reg-alloc.c (_jit_regs_load_to_top_two): handle the
	case where the second value is on the stack but not the first.

	* dpas/dpas-parser.y, dpas/dpas-types.c, dpas/dpas-types.h:
	report errors for unimplemented expressions and statements,
	so that users are not "surprised" when things silently fail.

	* .cvsignore, auto_gen.sh, configure.in, doc/.cvsignore,
	dpas/.cvsignore, dpas/Makefile.am, include/.cvsignore,
	jit/.cvsignore, jit/Makefile.am, jitdynamic/.cvsignore,
	jitdynamic/Makefile.am, jitplus/.cvsignore, jitplus/Makefile.am,
	tools/.cvsignore, tutorial/.cvsignore, tutorial/Makefile.am:
	modify the autoconf/automake build system to use libtool.

2004-05-10  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-reg-alloc.c, jit/jit-reg-alloc.h, jit/jit-rules-interp.c:
	interpreter code conversion for relative pointer and copy opcodes;
	fix some bugs in stack-based register allocation.

	* dpas/dpas-parser.y, dpas/dpas-types.c, dpas/dpas-types.h:
	loading and storing record fields in Dynamic Pascal.

	* dpas/dpas-builtin.c: implement the "New" and "Dispose" builtins.

2004-05-08  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-cache.c, jit/jit-cache.h, jit/jit-dump.c, jit/jit-interp.h,
	jit/jit-rules-interp.c: add "_jit_cache_get_end_method", to allow
	the end of a method's code to be located without explicit marking.

	* configure.in, include/jit/jit-util.h, jit/jit-string.c:
	remove the locale-sensitive string comparison routines because
	they aren't used in libjit, and front ends will normally have
	their own functions for this purpose.

	* Makefile.am, configure.in, doc/Makefile.am, doc/libjit.texi,
	include/jit/Makefile.am, include/jit/jit-dynamic.h,
	include/jit/jit-util.h, jit/Makefile.am, jit/jit-dynlib.c,
	jit/jit-mangle.c, jitdynamic/.cvsignore, jitdynamic/Makefile.am,
	jitdynamic/jit-cpp-mangle.c, jitdynamic/jit-dynlib.c:
	move the dynlib and C++ name mangling routines into a separate
	"jitdynamic" library, which will handle all of the cross-language
	naming and dynamic invocation logic.

	* include/jit/jit-type.h, jit/jit-internal.h, jit/jit-type.c,
	jitdynamic/jit-cpp-mangle.c: move the "JIT_TYPE_xxx" constants
	into the public headers and add "jit_type_get_kind" so that
	front end code can classify types quickly.

	* jit/jit-dump.c: use "objdump" to dump compiled native code.

2004-05-07  Rhys Weatherley  <rweather@southern-storm.com.au>

	* dpas/dpas-function.c, dpas/dpas-internal.h, dpas/dpas-main.c,
	dpas/dpas-parser.y, jit/jit-interp.cpp, jit/jit-interp.h,
	jit/jit-opcode.c, jit/jit-rules-interp.c: execute the "main"
	method once a Dynamic Pascal program has been compiled;
	fix some calling convention problems with "call_external".

	* dpas/dpas-builtin.c, dpas/dpas-scanner.l: add the "Flush"
	and "Terminate" builtins; fix a small bug in string scanning.

	* include/jit/jit-elf.h, jit/Makefile.am, jit/jit-context.c,
	jit/jit-elf-read.c, jit/jit-internal.h, jit/jit-symbol.c:
	implement symbol relocations for the ELF binary reader.

	* dpas/dpas-parser.y: code generation for "for" loops.

2004-05-06  Rhys Weatherley  <rweather@southern-storm.com.au>

	* dpas/Makefile.am, dpas/dpas-builtin.c, dpas/dpas-function.c,
	dpas/dpas-internal.h, dpas/dpas-main.c, dpas/dpas-parser.y,
	dpas/dpas-scope.c, dpas/dpas-scope.h, dpas/dpas-semantics.h,
	dpas/dpas-types.c, dpas/dpas-types.h, include/jit/jit-block.h,
	include/jit/jit-insn.h, include/jit/jit-plus.h, jit/jit-block.c,
	jit/jit-dump.c, jit/jit-function.c, jit/jit-insn.c, jit/jit-interp.cpp,
	jit/jit-opcode.c, jit/jit-rules-arm.c, jit/jit-rules-interp.c,
	jit/jit-rules-x86.c, jit/jit-type.c, jit/jit-value.c,
	jitplus/jit-plus-function.cpp: get basic compilation working
	in Dynamic Pascal.

2004-05-03  Rhys Weatherley  <rweather@southern-storm.com.au>

	* tools/gen-apply.c: improve the maintainability of the apply macros.

	* include/jit/jit-block.h, include/jit/jit-context.h,
	include/jit/jit-dump.h, include/jit/jit-elf.h, include/jit/jit-init.h,
	include/jit/jit-meta.h, include/jit/jit-type.h, include/jit/jit-util.h,
	jit/jit-type.c, jit/jit-value.c: add more instances of JIT_NOTHROW
	to the headers; add some special meta tags for types.

	* include/jit/jit-type.h, jit/jit-type.c: tag the system-dependent
	types so that they can be distinguished from the fixed-sized types
	when it is necessary to do so.

	* jit/Makefile.am, jit/jit-mangle.c: add the beginnings of a C++
	name mangler, to help with extracting C++ symbols from dynamic
	shared libraries.

	* doc/Makefile.am, doc/libjit.texi, doc/mangling_rules.txt,
	include/jit/jit-type.h, include/jit/jit-util.h, jit/jit-mangle.c,
	jit/jit-type.c: continue the implementation of the C++ name
	mangling routines.

2004-05-01  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-apply-x86.c, jit/jit-rules-x86.c, tools/gen-apply.c:
	fix function prolog and epilog handling for structure returns
	under x86/cdecl.

	* configure.in: set the initial working version to 0.0.1.

	* jit/jit-rules-x86.c: implement x86 code generation for some of
	the basic operators.

	* include/jit/jit-insn.h, include/jit/jit-opcode.h,
	include/jit/jit-plus.h, jit/jit-insn.c, jit/jit-interp.cpp,
	jit/jit-opcode.c, jit/jit-reg-alloc.c, jit/jit-reg-alloc.h,
	jit/jit-rules-interp.c, jitplus/jit-plus-function.cpp:
	add array access instructions.

	* tools/gen-apply.c: clean up the builder/parser macros and
	detect padding of the floating-point registers.

2004-04-30  Rhys Weatherley  <rweather@southern-storm.com.au>

	* include/jit/jit-function.h, include/jit/jit-insn.h,
	include/jit/jit-opcode.h, include/jit/jit-plus.h, jit/jit-except.cpp,
	jit/jit-function.c, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-interp.cpp, jit/jit-interp.h, jit/jit-opcode.c,
	jit/jit-rules-arm.c, jit/jit-rules-interp.c, jit/jit-rules-x86.c,
	jit/jit-rules.h, jitplus/jit-plus-function.cpp: put some
	infrastructure in place to support "try"-related instructions.

	* dpas/dpas-parser.y, dpas/dpas-scope.h, dpas/dpas-semantics.h:
	introduce effective address based l-values into dpas.

2004-04-27  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-dump.c, jit/jit-reg-alloc.c: fix a register stack bug
	in "_jit_regs_set_value"; add some more debug code.

	* include/jit/jit-opcode.h, jit/jit-insn.c, jit/jit-internal.h,
	jit/jit-interp.cpp, jit/jit-opcode.c: wrap function calls
	with code to set up and remove exception frame information.

	* jit/jit-function.c, jit/jit-insn.c, jit/jit-internal.h:
	intuit "nothrow" and "noreturn" flags for compiled functions.

	* include/jit/jit-insn.h, include/jit/jit-plus.h, jit/jit-insn.c,
	jitplus/jit-plus-function.cpp: add "jit_insn_throw",
	"jit_insn_rethrow", and "jit_insn_get_call_stack" to assist
	with throwing exceptions.

	* include/jit/jit-insn.h, jit/jit-block.c, jit/jit-insn.c,
	jit/jit-internal.h: add some instructions for managing "try" blocks.

	* include/jit/jit-opcode.h, jit/jit-block.c, jit/jit-insn.c,
	jit/jit-internal.h, jit/jit-opcode.c: more work on "try" blocks.

2004-04-26  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-reg-alloc.c, jit/jit-reg-alloc.h: add functions to
	assist with register allocation on stack-based architectures.

	* jit/jit-rules-interp.c: implement "_jit_gen_load_value" for
	the interpreter backend.

	* jit/jit-interp.cpp, jit/jit-interp.h: fix some opcode names that
	should be prefixed with "JIT_OP".

	* jit/jit-function.c, jit/jit-internal.h, jit/jit-reg-alloc.c,
	jit/jit-reg-alloc.h, jit/jit-rules-arm.c, jit/jit-rules-interp.c,
	jit/jit-rules-interp.h, jit/jit-rules-x86.c, jit/jit-rules.h:
	interpreter back end code generation for binary, unary, and
	branch opcodes.

	* doc/libjit.texi, jit/jit-rules-interp.c: fix the Texinfo section
	markers in the "Porting" chapter.

	* jit/jit-rules-interp.c: code generation for interpreter return's.

	* include/jit/jit-except.h, include/jit/jit-function.h,
	include/jit/jit-plus.h, jit/jit-except.cpp, jit/jit-function.c,
	jit/jit-interp.cpp, jit/jit-interp.h, jit/jit-rules-interp.c,
	jitplus/jit-plus-function.cpp: implement "jit_function_apply"
	and "jit_function_apply_vararg" for the interpreter back end.

	* jitplus/jit-plus-function.cpp: initialization errors in
	the C++ binding.

	* jit/jit-function.c, jit/jit-insn.c, jit/jit-interp.cpp,
	jit/jit-rules-interp.c: work on code generation for function calls.

	* doc/libjit.texi, include/jit/jit-insn.h, include/jit/jit-plus.h,
	jit/jit-insn.c, jitplus/jit-plus-function.cpp, tutorial/t2.c:
	add a "flags" parmeter to "jit_insn_call" and friends, so that
	"nothrow", "noreturn", and "tail" options can be supplied.

	* jit/jit-dump.c, jit/jit-interp.cpp, jit/jit-interp.h,
	jit/jit-opcode.c, jit/jit-rules-interp.c: dump the translated
	native code from "jit_dump_function" are compilation.

	* jit/jit-interp.cpp, jit/jit-rules-interp.c: argument variable
	offsets should in item units, not byte units.

	* jit/jit-insn.c, jit/jit-reg-alloc.c, jit/jit-reg-alloc.h,
	jit/jit-rules-interp.c: improve register allocation in stacks.

2004-04-25  Rhys Weatherley  <rweather@southern-storm.com.au>

	* jit/jit-apply-func.h, jit/jit-apply-x86.c, jit/jit-apply-x86.h,
	jit/jit-cache.c: use CPU-specifc padding for aligning code
	areas with NOP's, for greater runtime efficiency.

	* include/jit/jit-elf.h, jit/Makefile.am, jit/jit-elf-write.c:
	add the skeleton of the ELF writing routines.

	* jit/jit-interp.cpp: modify VM_BR_TARGET so that it is PIC-friendly.

2004-04-24  Rhys Weatherley  <rweather@southern-storm.com.au>

	* */*: Initial public release.  Most of the skeleton code is in place.
