NetSNMP::agent - Perl extension for the net-snmp agent. use NetSNMP::agent; my $agent = new NetSNMP::agent('Name' => 'my_agent_name'); This module implements an API set to make a SNMP agent act as a snmp agent, a snmp subagent (using the AgentX subagent protocol) and/or embedded perl-APIs directly within the traditional net-snmp agent demon. Also see the tutorial about the genaral Net-SNMP C API, which this module implements in a perl-way, and a perl specific tutorial at: http://www.net-snmp.org/tutorial-5/toolkit/

Sub-agent example
use NetSNMP::agent (':all'); use NetSNMP::ASN qw(ASN_OCTET_STR); my $value = "hello world"; sub myhandler { my ($handler, $registration_info, $request_info, $requests) = @_; my $request; for($request = $requests; $request; $request = $request->next()) { my $oid = $request->getOID(); if ($request_info->getMode() == MODE_GET) { # ... generally, you would calculate value from oid if ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.7375.1.0")) { $request->setValue(ASN_OCTET_STR, $value); } } elsif ($request_info->getMode() == MODE_GETNEXT) { # ... generally, you would calculate value from oid if ($oid < new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.7375.1.0")) { $request->setOID(".1.3.6.1.4.1.8072.9999.9999.7375.1.0"); $request->setValue(ASN_OCTET_STR, $value); } } elsif ($request_info->getMode() == MODE_SET_RESERVE1) { if ($oid != new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.7375.1.0")) { # do error checking here $request->setError($request_info, SNMP_ERR_NOSUCHNAME); } } elsif ($request_info->getMode() == MODE_SET_ACTION) { # ... (or use the value) $value = $request->getValue(); } } } my $agent = new NetSNMP::agent( # makes the agent read a my_agent_name.conf file 'Name' => "my_agent_name", 'AgentX' => 1 ); } $agent->register("my_agent_name", ".1.3.6.1.4.1.8072.9999.9999.7375", \&myhandler); my $running = 1; while($running) { $agent->agent_check_and_process(1); } $agent->shutdown();

Embedded agent example
# place this in a .pl file, and then in your snmpd.conf file put: # perl do '/path/to/file.pl'; use NetSNMP::agent; my $agent; sub myhandler { my ($handler, $registration_info, $request_info, $requests) = @_; # ... } $agent = new NetSNMP::agent( 'Name' => 'my_agent_name' ); $agent->register("my_agent_name", ".1.3.6.1.4.1.8072.9999.9999.7375", \&myhandler); $agent->main_loop(); new ( OPTIONS ) This is the constructor for a new NetSNMP::agent object. Possible options are: Name - Name of the agent (optional, defaults to "perl") (The snmp library will read a NAME.conf snmp configuration file based on this argument.) AgentX - Make us a sub-agent (0 = false, 1 = true) (The Net-SNMP master agent must be running first) Ports - Ports this agent will listen on (EG: "udp:161,tcp:161") Example: $agent = new NetSNMP::agent( 'Name' => 'my_agent_name', 'AgentX' => 1 ); register (NAME, OID, \&handler_routine ) Registers the callback handler with given OID. $agent->register(); A return code of 0 indicates no error. agent_check_and_process ( BLOCKING ) Run one iteration of the main loop. BLOCKING - Blocking or non-blocking call. 1 = true, 0 = false. $agent->agent_check_and_process(1); main_loop () Runs the agent in a loop. Does not return. shutdown () Nicely shuts down the agent or sub-agent. $agent->shutdown(); handler ( HANDLER, REGISTRATION_INFO, REQUEST_INFO, REQUESTS ) The handler is called with the following parameters: HANDLER - FIXME REGISTRATION_INFO - what are the correct meanings of these? REQUEST_INFO - REQUESTS - Example handler: sub myhandler { my ($handler, $reg_info, $request_info, $requests) = @_; # ... } The handler subroutine will be called when a SNMP request received by the agent for anything below the registered OID. The handler is passed 4 arguments: $handler, $registration_info, $request_info, $requests. These match the arguments passed to the C version of the same API. Note that they are not entirely complete objects but are functional "enough" at this point in time.

$request_info object functions
getMode () Returns the mode of the request. See the MODES section for list of valid modes. $mode = $request->getMode(); getRootOID () Returns a NetSNMP::OID object that describes the registration point that the handler is getting called for (in case you register one handler function with multiple OIDs, which should be rare anyway) $root_oid = $request->getRootOID();

$request object functions
next () Returns the next request in the list or undef if there is no next request. $request = $request->next(); getOID () Returns the oid of the request (a NetSNMP::OID class). $oid = $request->getOID(); setOID (new NetSNMP::OID("someoid")) Sets the OID of the request to a passed oid value. This should generally only be done during handling of GETNEXT requests. $request->setOID(new NetSNMP::OID("someoid")); getValue () Returns the value of the request. Used for example when setting values. $value = $request->getValue(); FIXME: how to get the type of the value? Is it even available? [Wes: no, not yet.] setValue ( TYPE, DATA ) Sets the data to be returned to the daemon. Returns 1 on success, 0 on error. TYPE - Type of the data. See NetSNMP::ASN for valid types. DATA - The data to return. $ret = $request->setValue(ASN_OCTET_STR, "test"); setError ( REQUEST_INFO, ERROR_CODE ) Sets the given error code for the request. See the ERROR CODES section for list of valid codes. $request->setError($request_info, SNMP_ERR_NOTWRITABLE); getProcessed () The processed flag indicates that a request does not need to be dealt with because someone else (a higher handler) has dealt with it already. $processed = $request->getProcessed(); setProcessed ( PROCESSED ) Sets the processed flag flag in the request. You generally should not have to set this yourself. PROCESSED - 0 = false, 1 = true $request->setProcessed(1); getDelegated () If you can handle a request in the background or at a future time (EG, you're waiting on a file handle, or network traffic, or ...), the delegated flag can be set in the request. When the request is processed in the future the flag should be set back to 0 so the agent will know that it can wrap up the original request and send it back to the manager. This has not been tested within perl, but it hopefully should work. $delegated = $request->getDelegated(); setDelegated ( DELEGATED ) Sets the delegated flag. DELEGATED - 0 = false, 1 = true $request->setDelegated(1); getRepeat () The repeat flag indicates that a getbulk operation is being handled and this indicates how many answers need to be returned. Generally, if you didn't register to directly handle getbulk support yourself, you won't need to deal with this value. $repeat = $request->getRepeat(); setRepeat ( REPEAT ) Sets the repeat count (decrement after answering requests if you handle getbulk requests yourself) REPEAT - repeat count FIXME $request->setRepeat(5); MODE_GET MODE_GETBULK MODE_GETNEXT MODE_SET_ACTION MODE_SET_BEGIN MODE_SET_COMMIT MODE_SET_FREE MODE_SET_RESERVE1 MODE_SET_RESERVE2 MODE_SET_UNDO SNMP_ERR_NOERROR SNMP_ERR_TOOBIG SNMP_ERR_NOSUCHNAME SNMP_ERR_BADVALUE SNMP_ERR_READONLY SNMP_ERR_GENERR SNMP_ERR_NOACCESS SNMP_ERR_WRONGTYPE SNMP_ERR_WRONGLENGTH SNMP_ERR_WRONGENCODING SNMP_ERR_WRONGVALUE SNMP_ERR_NOCREATION SNMP_ERR_INCONSISTENTVALUE SNMP_ERR_RESOURCEUNAVAILABLE SNMP_ERR_COMMITFAILED SNMP_ERR_UNDOFAILED SNMP_ERR_AUTHORIZATIONERROR SNMP_ERR_NOTWRITABLE Please mail the net-snmp-users@lists.sourceforge.net mailing list for help, questions or comments about this module. Module written by: Wes Hardaker <hardaker@users.sourceforge.net> Documentation written by: Toni Willberg <toniw@iki.fi> Wes Hardaker <hardaker@users.sourceforge.net> NetSNMP::OID(3), NetSNMP::ASN(3), perl(1).