OpenBSD/powerpc 2.2 runs on ISA (AT-Bus), and PCI buses
with 603, 603e, 604, 604e processors.
Only systems with openfirmware are supported.
Has been tested on various Motorola (MCG) boards:
	VME16xx, Ultra, Pro2000,
	Pro3000, Series E and Series DT.
Also tested on a V-I Power-3 vme board.

The minimal configuration is said to require 8M of RAM and 150M of
disk space, though we do not know of anyone running with a system
quite this minimal today.  To install the entire system requires much
more disk space,

Supported devices include:
	ONLY DEVICES SUPPORTED BY OPENFIRMWARE ON THE MACHINE.

	Floppy controllers.
	IDE hard disk controllers. (if supported by ofw)
	SCSI host adapters: (if supported by ofw)
		Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters
		(ofw may support other scsi devices)

	VGA, SVGA Display Adapters. 
		X does not yet exist.  currently will only function as console

	Serial ports:
		Only port 0 on the machine is supported and only as console.

	Ethernet adapters:
		Digital DC21x4x-based PCI Ethernet adapters, including:
		Znyx ZX34X
		(ofw may support other devices)
	Tape drives:
		NONE
	CD-ROM drives:
		SCSI CD-ROM drives
	Mice:
		NONE
	Sound Cards:
		NONE
	Miscellaneous:
