1 1 - INSTALLATION INSTRUCTIONS FOR EXISTING INSTALLATIONS + ____________ ____________ ___ ________ _____________ 0 September 1981 - Starting with distribution 4.3 the MTS file system uses the VAMX disk format rather than the IBM TSS VAM2 format employed in previous distributions. If your installation has not yet converted from the VAM2 or old VAMX formats, you must perform this conversion before installing most of the major components of Distribution 5.0. See the installation instructions that were included with D4.3 together with additional comments that were included in the D4.3A driver file for more information on the conversion process. The rest of this writeup assumes that the conversion has already been done. 0 The following steps give the basic procedure to be followed to install this distribution at installations which are currently running the previously distributed system. At installations where substantial changes have been made to that system or where it is not desired that all of this distribution be installed at once, this procedure will have to be modified accordingly. 0 1. Restore DASDI (598/3) and DISKCOPY (724/3) to your current system from the D5.0 FS tapes (the D4.3 versions of these programs might work, but several problems have been fixed in the D5.0 versions). Note that component 724/3 is a special version of the D5.0 DISKCOPY that will work in a D4.3 system. You should consult the appropriate distribution driver file index (item 20003A or 20003B) for the object files for these components. The index will indicate on which tape each is located and what the file numbers are. 0 2. Use DASDI to initialize a VAMX disk pack as public volume 1 with a unique volume name; MTS501 would be a good choice. See the General Notes for instructions on using FILE:DASDI. The following commands illustrate the use of this program: 0 RUN FILE:DASDI Dxxx MTS501 VX 1 IPL SLOW $ENDFILE 0 where "Dxxx" is the device name of the disk to be initialized and "MTS501" is the volume name to be used for the disk pack. 0 3. Use DISKCOPY to restore the D5.0 system from the distributed VAMX dump/restore tape(s). You should specify the IPL option, but SWAP isn't necessary. You may wish to specify the SLOW option to lessen the interference with your normal operation. See the General Notes for information on running DISKCOPY. The following commands illustrate the use of this program: 1 2 - RUN D4.3DISKCOPY TAPE >Tnnn (or *pdn*) DISK Dxxx MTS501 IPL SLOW $ENDFILE 0 where >Tnnn (or *pdn*) is the device (or pseudo-device) name on which the first D5.0 VAMX dump/restore tape is mounted. If you received the 1600 bpi distribution, you will be prompted to enter a second tape device name when DISKCOPY is ready for the second tape. 0 4. You will need a new set of TABLES for your D5.0 system. If you maintain your TABLES in assembly language form, you should consult the D5.0 TABLES description (4/3). Be sure to use the D5.0 version of COPY:FILE.MACROS (482/45) when you assemble your new version. This version of TABLES should only contain one disk volume, MTS501. 0 If you wish to use DECKGEN (4/6) to build your D5.0 TABLES, IPL from the D5.0 test pack. This can be done using either a real or a virtual machine and will probably put that machine into wait state (unless you have a 3066, 3270, or 1052-compatible device at address 009). To get the IPLREADER (1021) to talk to you, press "request" on a 1052 or "enter" on a 3066 or 3270 (i.e., cause an attention interrupt). When it asks if you want to run the current system, reply "NO" and enter the commands: 0 LOAD NAME=*IPL.DECKGEN START 0 See the DECKGEN writeup (4/7) for information on how to proceed from here. Since DECKGEN was loaded by the IPLREADER (instead of from tape) and therefore is told where the console is, it is not necessary to give an attention interrupt on the console to wake it up. You should include only one public volume, MTS501, in the generated tables. The deck produced should be written to tape (or cards) for use in step 5. 0 5. If a pre-D5.0 virtual machine is to be used to run the D5.0 system, the CMDS assembly must be patched so that all user programs are run as if PROT=OFF had been specified on the $RUN command. This is necessary because the D5.0 system requires support for the monitor call instruction which is not available in pre-D5.0 virtual machines or UMMPS. To further complicate matters the D5.0 version of the UBC virtual machine does support the monitor call instruction, but requires changes included in the D5.0 version of MTS and UMMPS. 0 It may also be necessary to reduce the size of the resident system so that it will load, if your pre-D5.0 1 3 - virtual machine won't support real memories larger than 256 pages. The decks MCHSUBR, CCHSUBR, A#VCCH47, TTTABLES, CHECKFE, FESNIFF, PAGEDJDE and ICOSTTAB can all be deleted from the resident system to save space. You can set up a version of tables with a fairly small number of job tables and pool entries, reduce the number of CMDSTAT drop areas and cut down the size of the shared file table to save a bit more space. 0 Using either a real or virtual machine IPL from the D5.0 pack and again reply "NO" when asked if you want the current system. This time enter the commands: 0 LOAD NAME=*IPL.D5.0 REPLACE TABLES FROM xxx (Reply to the prompt for a printer address for a map) 0 where xxx is the address of the tape written by DECKGEN + ___ (or containing the object deck for your assembled TABLES). If you are working from a virtual rather than a real machine you should patch CMDS so that PROT=OFF is implied for all $RUN commands: 0 DISPLAY V(CMDS)+2286 (You should see X'4780A4C8') MODIFY V(CMDS)+2286 4700 0 Finally enter 0 START 0 The D5.0 system should now be running. 0 6. When initialization finishes, you should run RAMROD (1019) and create a new system from the D5.0SYS system, replace the deck TABLES.DUMMY in that new system with the TABLES created in step 4, rename TABLES.DUMMY to be TABLES, and delete the decks SEG0.NCA and SEG1.NCA. You may also want to delete one or more of the following decks depending on your machine configuration, (leaving them in won't hurt anything): A#VCCH47, IGFC60, IGFC70, and IGFC80. The decks PAGEDJDE, CHECKFE and FESNIFF can probably be deleted by everyone except UM and perhaps WSU. Having made these changes, you should then make this new system current. 0 7. Use this pack to get the new version of MTS working to your satisfaction. This will require making any local modifications to the resident system in the RAMROD file on the pack. This pack contains almost all of the public and semi-public files, but not all of the utility programs you may want. If additional programs are needed, move them from your production packs to the test pack using FM (1020) on your production system or by restoring them from the D5.0 *FS tapes. Be sure to use the D5.0 version of FM and a private copy of the D5.0 file routines (482/46) when 1 4 - doing this. 0 This is the first distribution to include a working version of the Disk Manager (769). Before installing D5.0 as your production system you should probably take a careful look at the DMGRSTAT writeup which may be found toward the end of the Operator's Manual (I'm not sure why it isn't at the front with the rest of the job programs, but it isn't) and at the comments generated by the ANNOTATE macro that is included in COPY:DM.MACROS (these comments aren't completely up to date). While it is possible to run without using the Disk Manager, it won't work very well (not even as well as the D4.3 system) under a heavy disk load. This is because certain checks made by the supervisor in an attempt to improve disk throughput now assume the disk manager is being used. A few utility programs (VAMREC, DISKCOPY, IPLINIT, ...) won't work with disks that are under Disk Manager control. The DMGRSTAT job or the *-file *DSK can be used to remove a disk from and return a disk to Disk Manager Control. You should also read about the FAKEDMGR job in the Operator's Manual and understand its relationship to the real Disk Manager. 0 A side effect of the switch to the disk manager is that jobs that go into disk I/O wait are treated just as if they were in page-wait -- that is they can't do anything. + ________ In theory this can cause deadlocks in some cases where it wasn't a problem before. In practice the only trouble spot was the 3270 DSR and the D5.0 version fixes the problem. 0 Because terminal buffers are now allocated in shared paged VM rather than shared unpaged VM, any absolute jobs that call BUFFALLOC and aren't part of the distributed system will have to be changed. In addition all routines that call BUFALLOC must now supply the address of a standard 18 word save area in GR13. 0 The format of the page control block has changed slightly, so if you don't plan to use the distributed version of the PDP you will need to modify your local version. 0 The RJBFREEZ bit in the job table has moved. If you don't use the distributed version of HASP you should check to make sure your local version references the correct bit. 0 The D5.0 supervisor uses a new CPU scheduling scheme which requires some changes to HASP and the HASPLINGs. The distributed version of the HASPLINGs now use SVC HASPHERE to let the supervisor know who they are. Also loops using SVC DORMANT and the Test and Set instruction were changed into SVC WAYTs or SVC SLEEPs. If you don't use the distributed version of HASP you should probably make similar changes to your local version. 0 The D5.0 supervisor allows tasks to obtain more than 11 1 5 - devices. As a side effect of this change a task's device list pointers are no longer kept in the job table. The following routines that looked into the job table to locate device list entries were changed: BROADCST, CONFIG, FESNIFF, FIDCQ, MOUNT, MTS, PRINTDUMP, SSRTN, TASKS, and TASKSTAT. If you don't use the distributed versions of these routines or if you have other routines that get this information from the job table, you will need to modify your local versions. 0 The file that holds the $ACCOUNTING CLS must be permitted to the PKEY=*SYS.GETIN rather than PKEY=*ACC?. 0 The supervisor's support for virtual machines has changed. If you don't use the distributed virtual machine or if you use other virtual machines, you will need to change the local versions. As mentioned above MTS requires the D5.0 virtual machine because the GATE assembly issues monitor call instructions and because the distributed system requires more than 256 real pages to load. 0 The D5.0 version of MTS includes calls to the MTS message facility during signon processing so the message facility must be installed (it's a simple patch to disable these calls). 0 The D5.0 supervisor will no longer run on machines that don't support Channel Indirect Data Addressing (CIDA). So if your machine doesn't, you'll need to buy a new one. 0 The codes and strings returned by the TASKSTAT subroutine have changed somewhat, so local programs that use this information will need to be changed (the PW program at UBC for example). 0 The format of the disk and tape unit check records logged using CMDSTAT has changed, so any local programs used to post process this information will also require changes. A more modern version of EREP (FER1110) is included with D5.0 as well. 0 There are certainly other changes that should be mentioned here if we could only remember them all. See the list of changes included in the Tables writeup as well as the various CDUPDATE decks for more information. The file MTS:CHANGES (42/8) contains a list of all changes to the MTS assemblies since D4.2. 0 8. Add any local modules to *LIBRARY. Do not simply replace the new *LIBRARY with your old one, but rather merge the two. 0 9. Add any local messages to *SMDS. Again, do not just replace the new file with your old one, as there are several new messages in it. 1 6 - 10. Add any local changes to *SYSMAC. Again, these must be merged with the distributed version. 0 11. You should always use the D5.0 IPLREADER with the D5.0 system and the D4.3 IPLREADER with the D4.3 system. At some point you will want to replace the IPLREADER on your production IPL pack with the D5.0 version. Follow the procedure in the IPLREADER writeup (1021/12) making sure that you run it from the D5.0 pack (so you get the new + ___ IPLREADER), but write it on your production IPL pack. + _____ Remember that it is possible to IPL from one pack and then load a system from and run on a different pack(s). Thus you may not want to replace your production IPLREADER with the D5.0 version until you are sure you have a stable system and won't need to revert to an older version or you may want to keep a copy of your production IPLREADER on a second test pack. 0 12. Many files on your production system need to be updated to contain programs or data for the new system. This should be done by using FM on the MTS501 pack to move the files to your regular packs. A complete list of all the files on the MTS501 pack is available in the file DIST:MTS501.FILES. A list of those files that have changed since D4.3 is included at the end of these instructions. Make a list in a file of all the files to be moved. Then enter the command: 0 RUN FILE:FM+FILE:FILERTNS(1,99)+tables+COPY:SYSDEFS - PROT=OFF 0 where tables contains the D5.0 TABLES for your production + ______ __________ system. When FM reads from the terminal enter a $CONTINUE WITH line to read the list of files you produced above. FM will ask if it is OK to destroy some files, tell it OK or ALLOK. 0 13. You should also move your resident system for this distribution (as modified on your test pack) to *IPL.0 (or some other file) on your production IPL pack. Make sure that this system has a D5.0 version of TABLES which corresponds to your production system. 0 14. You are now ready to IPL the new production system. 0 15. Signon at the operator's console under userid MTS and enter: 0 RUN FILE:FILEUPD 0=*DUMMY* 1=-EMPTY 0 This will update file storage records for all userids. It is important that this be done, since the file space for some userids will be incorrect as a result of running FM. It may be necessary to change some of the file names on $CONTINUE WITH lines at the end of FILE:FILEUPD to correspond to the names used in your system: 1 7 - 0 FILE:ACATALOG.FAST FILE:REALACATSUB RSTR:VTOCREAD FILE:DSACC ACC:ACCLIB COPY:SYSDEFS 1 8 - The following is a list of public, semi-public, and major private files on the test pack which have been added, deleted or changed since D4.3. A word of caution is needed here. The following list is based on the revision levels in the driver file. While we have tried to set the revision levels correctly for all components, doing this for a full distribution is a huge job and we have certainly made some mistakes. Therefore the following list will include some files that haven't changed and some files that have changed will be omitted. We've tried to make the first type of mistake more common then the second. Some of the files that are listed as being deleted have only been renamed. Others have been removed from the test pack to save disk space. Finally some are obsolete and no longer exist in the production system at UM. - *ACCRESTORE changed *COMPARE added *ALGOLW changed *CPW changed *ASMTIDY changed *CPW added *ASSIST changed *DCALC changed *BBS changed *DEDIT changed *BNCHRTN changed *DLG changed *CCL changed *DMP changed *CCMEMOS changed *DMP added *CCMEMOS added *DWB changed *CCPUBLICATIONS changed *EBCDASC changed *CCPUBLICATIONS added *ENCRYPT changed *CCQUEUE changed *EXCOM changed *CCT changed *EXPL changed *CDUPDATE changed *EXPLBNF changed *CKID changed *EXPLIB changed *CKSIG changed *EXSKELETON changed *CKSIG added *FAKEOS changed *CLK changed *FDSKRTN changed *CLK added *FDSKRTN added *CLN changed *FILESCAN changed *CLN added *FILESCAN added *CLR changed *FLOPDSECT changed *CLR added *FLOPDSECT added *CLSACC changed *FS changed *CLSED changed *FSC changed *CLSFILESTATUS changed *FSM changed *CLSMESSAGESYS changed *FTNTIDY changed *CLSMESSAGESYS added *GFINFODSECT changed *CLSMOUNT changed *GOM changed *CLSMSG deleted *GTU changed *CLSNET changed *HLG changed *CLSPERMIT changed *HLG added *CLSPMF changed *HUH changed *CLSSDS changed *HUH added *CLSSSTA changed *HYPHDICT changed *CMB changed *IEHMOVE changed *CMD changed *IF changed *CNFGINFODSECT changed *IG changed *COBLIB changed *IG.AJ830 changed *COMPARE changed *IG.CCMP changed 1 9 - *IG.CK400 changed *LIBRARY changed *IG.CRT changed *LOGPURGE changed *IG.CRT added *LOGPURGE added *IG.DDRXF changed *MACUTIL changed *IG.DDRXF added *MCS650XASR changed *IG.DEBUG changed *MCS650XASR added *IG.DEBUG added *MESSAGES changed *IG.DTC300 changed *MESSAGES added *IG.DTC302 changed *MESSSUBS changed *IG.GT40 changed *MESSSUBS added *IG.HIDP11 changed *MLD changed *IG.HIDP11 added *MLD added *IG.HP2648A changed *MND changed *IG.HP2648A added *MND added *IG.HP7203 changed *MNETRTN changed *IG.HP7221 changed *MNETTOPDS changed *IG.HUGHES changed *MNS changed *IG.MX12000 changed *MNS added *IG.PEP changed *MOUNTSUB changed *IG.PICK changed *MOUNTSUB added *IG.PICK added *MSG changed *IG.PRINTER changed *MSG added *IG.PRINTER added *MSGINFDSECT changed *IG.PRNT deleted *MSGINFDSECT added *IG.QUMES5 changed *MSGUTIL changed *IG.SAVE changed *MSGUTIL added *IG.TD4000 changed *MTSUSERS changed *IG.TTY deleted *MTSUSERS added *IG.TX4002 changed *MTSUSERS.CCID changed *IG.TX4006 changed *MTSUSERS.CCID added *IG.TX4010 changed *MTSUSERS.NAMEID changed *IG.TX4014 changed *MTSUSERS.NAMEID added *IG.TX4025 changed *MTSUSERS.OTHER changed *IG.TX4027 changed *MTSUSERS.OTHER added *IG.TX4027 added *MTSUSERS.PROJ changed *IG.TX4662 changed *MTSUSERS.PROJ added *IG.TX4663 changed *M6800ASR changed *IG.TX4663 added *M6800ASR added *IG.XX1620 changed *M6809ASR changed *IG.3270 changed *M6809ASR added *IG.339 changed *OBJSCAN changed *INDEX changed *PASCALTIDY changed *IPL.DECKGEN changed *PASCALTIDY added *IPL.D4.3 deleted *PDL deleted *IPL.D5.0 changed *PDP8RTN changed *IPL.D5.0 added *PDSTOMNET changed *IPL.0 changed *PERSUB changed *IPL.1 changed *PEXIT changed *IPL.2 changed *PEXIT added *IPL.3 changed *PLOTSEE changed *I8080ASR changed *PLOTSYS changed *I8080ASR added *PL1SCAN changed *LABEL changed *PL360 changed *LABELSNIFF changed *PL360LIB changed *LALRGEN changed *PRINT changed *LBL changed *RATEFILE changed 1 10 - *RDC.LESSON1 changed *UNLINKER changed *RDC.LESSON1 added *USERDIRECTORY changed *RDC.LESSON2 changed *USERDIRECTORY added *RDC.LESSON2 added *VALIDATEFILE changed *RDC.LESSON3 changed *Z80ASR changed *RDC.LESSON3 added *Z80ASR added *RDC.LESSON4 changed *1052RTN changed *RDC.LESSON4 added *2260RTN changed *RDC.LESSON5 changed *2741RTN changed *RDC.LESSON5 added *3270RTN changed *REDUCE2 changed ACC.:ACCERRORSCAN changed *REDUCE2EXAMP changed ACC.:ACCFILCHARGE changed *RESTORE changed ACC.:ACCMAINT changed *RST changed ACC.:ACCRETRIEVE changed *SAV changed ACC.:PROJECTMAINT changed *SCRIPT1 changed ACC.:REBATE changed *SCRIPT1M changed ACC.:STAPROJECT changed *SCRIPT1M added APL.:001NEWS changed *SCRIPT2M changed APL.:005SNOBOL changed *SCRIPT2M added APL.:999TESTS changed *SCRIPT3M changed BNCH:BATCH.SCR changed *SCRIPT3M added BNCH:BM00 changed *SCRIPT4 changed BNCH:CMDS changed *SCRIPT6 changed BNCH:CREFMINPUT changed *SCRIPT7 changed BNCH:DRIVER changed *SCRIPT8 changed BNCH:DSR.S changed *SDM changed BNCH:GLOBALDEFS changed *SENSEDSECT changed BNCH:GLOBALDEFS added *SFSAVSUB changed BNCH:GLOBALS changed *SKEYSUB changed BNCH:GLOBALS added *SMDS changed BNCH:GLOBALSETS changed *SORT changed BNCH:GLOBALSETS added *SORTLM changed BNCH:LISTFILES changed *SPITERR changed BNCH:LISTFILES.S changed *SPITERR added BNCH:LLMPSEQU changed *SPRIVSUB changed BNCH:LLMPSEQU added *STA changed BNCH:MIDAS_1_DATA changed *STATUS changed BNCH:MIDAS_1_DATA added *STI changed BNCH:MONITOR changed *SVS changed BNCH:MONITOR.S changed *SVS added BNCH:SCR changed *SVW changed BNCH:SUBMIT changed *SV7 changed BNCH:SUBMIT.S changed *SV7 added COPY:BNCHSTATDSCT added *SYSMAC changed COPY:BNCHSTATDSCT changed *S2L changed COPY:CC.MACROS changed *TAPECOPY changed COPY:CCDEFS changed *TAPERTN changed COPY:CCDEFS added *TASKS changed COPY:CCSYMBOL changed *TAXIR changed COPY:CCSYMBOL added *TEXTFORM changed COPY:CLSTV.SG changed *TEXT360 changed COPY:CMDAREADSECT changed *TSH changed COPY:CPSCNPAR deleted *TSH added COPY:DEFS changed *UDROUTINES changed COPY:DEFS added *UDROUTINES added COPY:DM.MACROS changed 1 11 - COPY:DM.MACROS added DUMP:DUMP.CMDS changed COPY:DRDSECT changed DUMP:DUMP.CMDS added COPY:ED.MACROS changed DUMP:DUMPER changed COPY:FILE.MACROS changed DUMP:DUMPER added COPY:GLOBALDEFS changed DUMP:LOG changed COPY:GLOBALSETS changed DUMP:LOG added COPY:IG.COPY.M deleted DUMP:SIGFILE changed COPY:IT.MACROS changed DUMP:SIGFILE added COPY:IT.MACROS added DUMP:TAPES changed COPY:JOBSTA changed DUMP:TAPES added COPY:JONFMT.FNLIB added DWB.:CHGFORMNOTE deleted COPY:JONFMT.FNLIB changed DWB.:CMDCHECKTIME deleted COPY:JONMACLIBFMT added DWB.:CMDPROC.O deleted COPY:JONMACLIBFMT changed DWB.:CMDPROC.S deleted COPY:LLMPSEQU changed DWB.:CMDSTAT.CF deleted COPY:MISC.MACROS changed DWB.:CMDSTAT.D deleted COPY:MNTR.MACROS added DWB.:CMDTAPE.370 deleted COPY:MNTR.MACROS changed DWB.:CMDUTIL deleted COPY:MNTRDEFS changed DWB.:CMDXTRACT deleted COPY:MNTRDEFS added DWB.:CMDXTRACT3 deleted COPY:MTS.MACROS changed DWB.:CMDXTRACT4 deleted COPY:PCBDSECT changed DWB.:GOM.O changed COPY:PSA changed DWB.:GOM.OG changed COPY:RATEVEC changed DWB.:GOM.PRSLT changed COPY:RM.MACROS deleted DWB.:GOM.RDATA changed COPY:STATDSECT.SG changed DWB.:GOM.SEQS.O changed COPY:UC.MACROS changed DWB.:PUNUC deleted COPY:UC.MACROS added DWB.:VOLUME99.S deleted COPY:UMMPS.MACROS changed ETC.:ASMGF1 changed COPY:ZDEFS changed ETC.:BASICHELPC changed COPY:ZDEFS added ETC.:BASICSIGNONM changed DIST:COMM changed ETC.:CNVTEREP changed DIST:DISTINDEX changed ETC.:CNVTEREP added DIST:DRIVER changed ETC.:CREPHELP changed DIST:DRIVER added ETC.:CREPHELP added DIST:DRIVERSCAN changed ETC.:EREPBLDL deleted DIST:DRIVERSCAN added ETC.:EREPCMDS changed DIST:DRIVER1600 deleted ETC.:EREPCMDS added DIST:DRIVER6250 deleted ETC.:EREPLIB deleted DIST:GENNOTES.WF changed ETC.:EREPLIB.VSS changed DIST:INDEX1600 changed ETC.:EREPLIB.VSS added DIST:INDEX6250 changed ETC.:EREP470LIB deleted DIST:MTS431.FILES deleted ETC.:FIX.EXPLAIN changed DIST:MTS501.FILES changed ETC.:FMTLIB changed DIST:MTS501.FILES added ETC.:GENASMERR changed DIST:NEWSYS.WF changed ETC.:GENASMERR added DIST:OLDSYS.WF changed ETC.:IF.DUMP changed DIST:RESSYS.WF changed ETC.:IF.ELMQQSV changed DIST:SPITLIB changed ETC.:IF.EXPLAIN changed DIST:SPITLIB added ETC.:IG.FONTS changed DMGR:MNTRMMSG changed ETC.:IG.STAT changed DMGR:MNTRMMSG added ETC.:M6800ASRERR deleted DUMP:DMPMSG changed ETC.:OLTEPBLDL changed DUMP:DMPMSG added ETC.:OLTEPCDSLIB changed DUMP:DUMP.BATCH changed ETC.:OLTEPLIB changed DUMP:DUMP.BATCH added ETC.:OLTEPTSTLIB changed 1 12 - ETC.:PASCALERRS deleted FILE:FLINE changed ETC.:PASCALINFO deleted FILE:FM changed ETC.:PL1LINKLIB changed FILE:FM.S changed ETC.:PMF.HELP changed FILE:FM.W changed ETC.:PMF.HELP added FILE:FSTEST changed ETC.:RDC2.CKPT changed FILE:GETDSK changed ETC.:RDC2.LISP changed FILE:GETFINF changed ETC.:READ3330LOG added FILE:GTUNIT changed ETC.:READ3330LOG changed FILE:MACROS changed ETC.:SYS1.LINKLIB added FILE:MACROS added ETC.:SYS1.LINKLIB changed FILE:MOVE changed ETC.:TAXIRMONITOR added FILE:MOVE.O deleted ETC.:TAXIRMONITOR changed FILE:OPEN changed ETC.:TAXMONITOR deleted FILE:PDLIST deleted ETC.:TXTFODS changed FILE:PM changed ETC.:UD.HELP changed FILE:PM.S deleted ETC.:UD.HELP added FILE:PROTECTPAPR deleted ETC.:UD.MESSAGES changed FILE:READI changed ETC.:UD.MESSAGES added FILE:READL changed ETC.:VSS changed FILE:REALACATSUB added ETC.:VSS added FILE:REALACATSUB changed ETC.:VSSLOG changed FILE:RECATALOG changed ETC.:VSSLOG added FILE:RECOVERING changed ETC.:3330LOCK deleted FILE:RWSEQ changed FILE:ACATALOG changed FILE:SCRATCHSIZES changed FILE:ACATALOG.FAS added FILE:SFDESTRY changed FILE:ACATALOG.FAS changed FILE:SODSECT deleted FILE:ACATSUB deleted FILE:STARFILES changed FILE:AMALGAMATE changed FILE:TABLMOD.W changed FILE:CALLDR changed FILE:TABLTST changed FILE:CALLRELDSK changed FILE:TRAK changed FILE:CATALOG changed FILE:UCDISK changed FILE:CATDSCBCOMP added FILE:UC3330 changed FILE:CATDSCBCOMP changed FILE:VAMREC changed FILE:CATSCAN changed FILE:VNTD changed FILE:CCATL changed FILE:VOLGET changed FILE:CHKFILE changed FILE:WRITEI changed FILE:CHKVTOC changed FIX.:FIX changed FILE:CHKVTOC.W changed HASP:D/A added FILE:CHONID changed HASP:HASPSTAT added FILE:CONVERTING changed INIT:CLEAN changed FILE:CONVV2VX changed INIT:INIT changed FILE:CONVV2VX.AS changed INIT:INITCHK changed FILE:DASDI changed INIT:INITCMD changed FILE:DASDI.S deleted MAIL:EXPLAINFILE added FILE:DISKCOPY changed MAIL:EXPLAINFILE changed FILE:DISKCOPY.AS changed MAIL:MCLS.DUMPS changed FILE:DISKDUMP changed MAIL:MCLS.DUMPS added FILE:DSECTLIST deleted MAIL:MCLS.SKELS changed FILE:DSECT2 deleted MAIL:MCLS.SKELS added FILE:DSKMAN changed MAIL:MESSCLS changed FILE:DSKMAN.W changed MAIL:MESSCLS added FILE:FILEUPD changed MAIL:MESSSUB changed FILE:FIXCAT changed MAIL:MESSSUB added FILE:FIXEH changed MAIL:MSG.LOG changed FILE:FIXSD changed MAIL:MSG.LOG added 1 13 - MAIL:MSGUTIL changed MTA.:FOS.TESTQSAM deleted MAIL:MSGUTIL added MTA.:FOS.TESTTIME deleted MAIL:MSUB.DUMPS changed MTA.:FOS.TRACE deleted MAIL:MSUB.DUMPS added MTA.:FOS.TSTUPDAT deleted MAIL:MSUB.SKELS changed MTA.:FOS.UPDATES deleted MAIL:MSUB.SKELS added MTA.:FOS.WTOTST deleted MNET:AUTH changed MTA.:HOGS changed MNET:AUTH added MTA.:INITJOB changed MNET:RELOAD changed MTA.:INITLOG deleted MNET:RELOAD added MTA.:IT.JOBPGM.S changed MNET:SETDATE changed MTA.:IT.S deleted MNET:SETDATE added MTA.:LOADCLAS deleted MNET:11LOAD changed MTA.:LOADCLAS.S deleted MNET:11LOAD added MTA.:MCHCCH.S changed MTA.:ACATALOG deleted MTA.:MCHMAC changed MTA.:ASMHDIR changed MTA.:MCHSUBR changed MTA.:ASMHMACUPD changed MTA.:OLTEPCDS changed MTA.:ASMHUPD changed MTA.:OLTEPCDSBLDL changed MTA.:ASMHUPDBUGS changed MTA.:OLTEPCMD changed MTA.:ASMHUPDEXTEN changed MTA.:OLTEPOBJCVT changed MTA.:ASMHUPDMTS changed MTA.:OLTEPTSTBLDL changed MTA.:ASMHUPDNEW changed MTA.:PAGLOAD changed MTA.:ASMHUPDNUM changed MTA.:PDP.S deleted MTA.:ASMHUTIL changed MTA.:PDPBUG changed MTA.:CNVTEREP changed MTA.:PRINTTRACE changed MTA.:COBOL.BLDLIN deleted MTA.:PRINTUC changed MTA.:COBOLU deleted MTA.:PRINTUC3330 changed MTA.:COBTEST deleted MTA.:PRNTCNTS changed MTA.:COBTEST2 deleted MTA.:PRUC3330 changed MTA.:COBTEST3 deleted MTA.:PUC changed MTA.:CONFIG.U changed MTA.:READRESTP changed MTA.:DMPLST deleted MTA.:READRESTP added MTA.:DMPLST.ADUMP deleted MTA.:READ3330LOG deleted MTA.:DMPLST.ICSTA deleted MTA.:SPIE deleted MTA.:DMPLST.ICTAB deleted MTA.:TESTIOMAC changed MTA.:DMPLST.LOADC deleted MTA.:TESTPROTSVC deleted MTA.:DMPLST.MACRO changed MTA.:TESTSETSTK deleted MTA.:DMPLST.SYSAD deleted MTA.:TESTSTIO deleted MTA.:DMPLST.TSTAT deleted MTA.:TESTTI deleted MTA.:DMPLST.VMFIN deleted MTA.:TIMESUBRS deleted MTA.:DPBJ deleted MTA.:TTPRINT changed MTA.:DRUMSTAT changed MTA.:UMMPS.U changed MTA.:EREP.ALIPGM deleted MTA.:UNITS.O changed MTA.:EREPBLDLIN deleted MTA.:UNITS.S deleted MTA.:EREPCMD deleted MTA.:VMN.S changed MTA.:EREPINFO changed MTA.:VSS.CNVTPDS added MTA.:EREPINFO added MTA.:VSS.CNVTPDS changed MTA.:EXIT changed MTA.:VSS.DRIVER changed MTA.:FOS.CREBLDL deleted MTA.:VSS.DRIVER added MTA.:FOS.EXCP deleted MTA.:VSS.PDSBUILD changed MTA.:FOS.IERR.TES deleted MTA.:VSS.PDSBUILD added MTA.:FOS.IERRCO00 deleted MTA.:VSS.WRITEUP changed MTA.:FOS.LPA deleted MTA.:VSS.WRITEUP added MTA.:FOS.OLTSEXCP deleted MTA.:V370 changed MTA.:FOS.SVC59 deleted MTA.:V370DEV.MAC changed MTA.:FOS.TESTBSAM deleted MTA.:V370DEV.UM changed 1 14 - MTS.:BROADCST changed MTS.:LLXUUPD deleted MTS.:BUFSTAT changed MTS.:LOADCLAS changed MTS.:BUFSTAT added MTS.:LOADCLAS added MTS.:CCDEFS changed MTS.:MACROSUPD deleted MTS.:CCDEFS added MTS.:MTSASM deleted MTS.:CCSYMBOL changed MTS.:MTSUPD deleted MTS.:CCSYMBOL added MTS.:PDP.S changed MTS.:CFDUB deleted MTS.:PDP.S added MTS.:CHGFORMDATA changed MTS.:PERMIT.S deleted MTS.:CKID.S changed MTS.:PLIMUPD changed MTS.:CLSDUMMY.S deleted MTS.:PRINTDUMP changed MTS.:CMDSTATUPD deleted MTS.:PWC changed MTS.:CMDSUPD deleted MTS.:RAMROD changed MTS.:CONSOLE changed MTS.:RAMROD.GSFS added MTS.:CREP changed MTS.:RAMROD.GSFS changed MTS.:CREP added MTS.:RAMROD.SR.S changed MTS.:CREPDIR changed MTS.:RNBRUPD changed MTS.:CREPDIR added MTS.:ROD changed MTS.:CREPLOG changed MTS.:RSFUPD changed MTS.:CREPLOG added MTS.:SDUMP deleted MTS.:DBJP changed MTS.:SELECTCMD changed MTS.:DCKPCHR changed MTS.:SSCNUPD deleted MTS.:DCKPCHR added MTS.:STDDMP changed MTS.:DCKPCHR.O deleted MTS.:SVC.W changed MTS.:DCKPCHR.S deleted MTS.:SYSDEFS changed MTS.:DCKPCHR.W changed MTS.:TESTPERSUB deleted MTS.:DPBJ changed MTS.:TIMTUPD deleted MTS.:DPBJ added MTS.:TMTSJLE deleted MTS.:DSRIUPD deleted MTS.:TSS/REL2.UTL deleted MTS.:DSRSUPD deleted MTS.:TTMAP changed MTS.:DTYPE changed MTS.:TTMAP added MTS.:DTYPE added MTS.:TTPRINT changed MTS.:DYSUPD deleted MTS.:TTPRINT added MTS.:FILESTATUS.S deleted MTS.:TTTABLES changed MTS.:FLOATEST deleted MTS.:TTTABLES added MTS.:FLOATEST.O deleted MTS.:UBCUPDATE.S deleted MTS.:FNAMETRT deleted MTS.:UBCUPDATE.W deleted MTS.:FS.S changed MTS.:UBCUPDATE.W2 deleted MTS.:FS.SNIFF deleted MTS.:UBCUPDATE.W3 deleted MTS.:FSCON.S deleted MTS.:USUBUPD changed MTS.:FSUBUPD deleted NEW.:CKSIG deleted MTS.:GATEUPD deleted NEW.:LOGPURGE deleted MTS.:GETRATES changed NEW.:PLUS changed MTS.:HASP.D/A deleted NEW.:PLUS.OBJLIB changed MTS.:INFOUPD deleted NEW.:PLUS.SOURCEL changed MTS.:IPLBOOT.O changed PLUS:PARSER.HELP added MTS.:IPLBOOT.S changed PLUS:PARSER.HELP changed MTS.:IPLGTUM.S deleted PLUS:PARSER.OL changed MTS.:IPLINIT.O changed PLUS:PARSER.OL added MTS.:IPLINIT.S changed RSTR:AUTOREST changed MTS.:IPLREAD.O changed RSTR:DEADFILEDES changed MTS.:IPLREAD.S changed RSTR:DEADSAVE changed MTS.:IPLREAD.W changed RSTR:DEADUCATDES changed MTS.:IT changed RSTR:DSF changed MTS.:IT added RSTR:FASTRESTORE changed MTS.:LECTURE1 deleted RSTR:FASTRSTR changed 1 15 - RSTR:FILEDSCB deleted STRT:MNS added RSTR:FILESAVE changed SYS.:ACCKILL changed RSTR:FILESAVEOBJ changed SYS.:ACCKILL added RSTR:FS.MACROS changed SYS.:BABYSIT changed RSTR:FSJOURNAL changed SYS.:BABYSIT added RSTR:FSJOURNAL added SYS.:CCP changed RSTR:FSS changed SYS.:CCPINIT changed RSTR:FSTAPECOPY changed SYS.:CCT changed RSTR:LFS.RESTART changed SYS.:CLOCKWATCHER added RSTR:MERGE changed SYS.:CLOCKWATCHER changed RSTR:OLFSOBJ changed SYS.:CMDPIKUP changed RSTR:REGENERATE changed SYS.:CPW changed RSTR:RESTORE changed SYS.:CPW added RSTR:RST changed SYS.:DSK changed RSTR:RSTFMT0 changed SYS.:DUMP deleted RSTR:RSTFMT1 changed SYS.:EREP changed RSTR:RSTFMT2 changed SYS.:EREP added RSTR:SAVEFILE changed SYS.:FIXFEP changed RSTR:SCANFILES changed SYS.:FNDLBL changed RSTR:SVSTART changed SYS.:GETDUMP deleted RSTR:TAPEDIRLIST changed SYS.:HASPSTAT deleted RSTR:TAPEOUT changed SYS.:INTCLASS deleted RSTR:VALIDATEFILE changed SYS.:INTDOCDATA deleted RSTR:VTOCREAD changed SYS.:NEWSTA changed SEG2:ALGOLW changed SYS.:PLT changed SEG2:BASIC changed SYS.:PURGE changed SEG2:CRYPT changed SYS.:PURGE added SEG2:CRYPT added SYS.:SDM changed SEG2:DISMOUNT changed SYS.:STATISTICS changed SEG2:DISMOUNT added SYS.:STATISTICS added SEG2:FIX changed SYS.:VOLUME99 deleted SEG2:GPID changed TAPE:TAPE changed SEG2:GPID added TAPE:TAPE added SEG2:IF deleted TAPE:UCTAPE changed SEG2:IG changed TAPE:UCTAPE added SEG2:IG added TMTS:DSPLIBRARY changed SEG2:OBJUTIL changed TMTS:DSPLIBRARY added SEG2:PRINTMAP changed TMTS:LOADMTS changed SEG2:SCREENRTNS changed TMTS:MTSSSCN deleted SEG2:SCREENRTNS added TMTS:PRINTDUMP deleted SEG2:S2APL changed TMTS:TMTSLIB changed SEG2:S2FILES changed TMTS:VDVLIBRARY changed SEG2:S2L changed TMTS:VDVLIBRARY added SEG2:TAPEQ changed TMTS:VMN changed SEG2:TAPEQ added TMTS:VMN added SEG2:TEXTFORM deleted UNSP:APPEND deleted SEG2:TIM.RTNS changed UNSP:ASMTIDY deleted SEG2:TIM.RTNS added UNSP:COMPARE deleted SEG2:TIME changed UNSP:CSNOOP.O changed SEG2:TRTABLES changed UNSP:FTNRE* changed SEG2:TWAIT changed UNSP:FTNRE* added SEG2:TWAIT added UNSP:I8080ASR deleted STRT:HWTPRINT deleted UNSP:JONMACLIBFMT deleted STRT:MND changed UNSP:LISTER changed STRT:MND added UNSP:MACSCAN.360 changed STRT:MNS changed UNSP:MACSCAN.370 changed 1 16 - UNSP:MCS650XASR deleted W009:UMLOAD.S changed UNSP:M6800ASR deleted W009:UMLOAD.S added UNSP:OBJREP deleted W009:UMLOAD.U changed UNSP:PAS.BC.LIB changed W009:UPDATE.U deleted UNSP:PAS.SB changed W170:KWIC deleted UNSP:PAS.SB.LINK changed W170:KWIC.SPELL deleted UNSP:PAS.SB.RUN changed W170:STAT.JOB changed UNSP:PAS.8000 changed W170:STAT.PROG changed UNSP:PAS.8000.ERR changed W170:STOR changed UNSP:PAS.8000.RUN changed W170:UCSYNC changed UNSP:PASCAL.GN deleted W170:UCSYNC added UNSP:PFILES deleted UNSP:PLM deleted UNSP:PLM81 deleted UNSP:PLM82 deleted UNSP:RG changed UNSP:RG.W deleted UNSP:SIDEBYSIDE changed UNSP:SIDEBYSIDE added UNSP:SIGSETUP changed UNSP:SIGSETUP added UNSP:TAPEDRIVES changed UNSP:TAPESHARE changed UNSP:TESTIO changed UNSP:TESTIO added UNSP:WRITEUPS deleted UNSP:Z80ASR deleted WSG.:BBSIT deleted WSG.:BUFSTAT deleted WSG.:DCSTAT deleted WSG.:DEDIT changed WSG.:FM.GEN changed WSG.:MOUNTCMD deleted WSG.:PDP8 changed WSG.:SSRTN changed WSG.:SSRTN.DOC deleted WSG.:SSTA.CLS deleted WSG.:SSTA.VEC deleted WSG.:SURVEY changed WSG.:SURVEY added WSG.:SURVEY.LIB changed WSG.:SURVEY.LIB added WSG.:TABLES changed WSG.:TABLES.WF deleted WSG.:TAPE deleted WSG.:TAPECOPY deleted WSG.:TAPEDUMP deleted WSG.:TAPEUC deleted WSG.:TT deleted W009:ABSLDR deleted W009:CLSINFO.S changed W009:CLSINFO.W changed W009:CLSINFO.X changed W009:I changed W009:PISTLE.S changed W009:SYMBOL.S deleted 1 17 - In addition, the following decks must be changed in, deleted from or added to the RAMROD resident system: - BJPMOD changed MONITOR UCRTNTAB added BROADCST changed MONITOR UNND added BUFALLOC changed MONITOR WAIT added CAT changed MSG changed CCDEFS added MTS changed CCSYMBOL added OPEN changed CHECKFE added OPERATOR changed CMDS changed PAGEDJDE added CMDSTAT changed PATH DEVICE added CONFIG changed PDP changed CONFIG.CARD changed PLIM changed CONSIO changed PN changed DMGR DISKXF added PTRUC changed DMGR DISPATCH added P11 changed DMGR ITSKXF added QN changed DMGR LOCK added RATEVEC changed DMGR MAIN added READ changed DMGR MISC added REDL changed DMGR MNTR added RSF changed DMGRSTAT added SSRTN changed DSRI changed STARTUP/SHUTDOWN changed DSRS changed STATJOB changed DYS changed STDDMP changed EXIT changed STOR changed FAKE DISK MANAGER added SYSDEFS changed FESNIFF added TAPEUC deleted FIDCQ changed TASKS changed FLINE changed TASKSTAT changed FNAMETRT changed TIMT changed FSUB changed TN changed GATE changed TPMOVE changed GETD changed TRAK changed GETFINF changed TTTABLES added GETRATES changed T11 added G11 changed UCDISK changed INFO changed UCTAPE added INITJE changed UC3330 changed INTERTSK chanded UMLOAD changed ITJOB changed UMMPS changed JBRP changed UNITS changed JOBLST.ENTRIES changed USUB changed JOBSTA changed VOLG changed KWIC changed WRIT changed LLXU changed MCHCCH changed MCHSUBR changed MONITOR GTFR added MONITOR MNTR added MONITOR MTS WAIT added MONITOR ONUN added MONITOR PRV added MONITOR SERVICE added