commit 8b5ab55d254f36e89b1b53aeac7223d2d102483e Author: Greg Kroah-Hartman Date: Sun Mar 11 16:19:47 2018 +0100 Linux 4.4.121 commit 0fc85640c6a8d84bdab008f285346061a8fc393d Author: Ernesto A. Fernández Date: Wed Aug 2 03:18:27 2017 -0300 btrfs: preserve i_mode if __btrfs_set_acl() fails commit d7d824966530acfe32b94d1ed672e6fe1638cd68 upstream. When changing a file's acl mask, btrfs_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by restoring the original mode bits if __btrfs_set_acl fails. Signed-off-by: Ernesto A. Fernández Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Nikolay Borisov Signed-off-by: Greg Kroah-Hartman commit ea1c4ebe282d6bb6afca4a42bfbfb933c86b264c Author: Daniel Borkmann Date: Thu Mar 8 16:17:34 2018 +0100 bpf, x64: implement retpoline for tail call [ upstream commit a493a87f38cfa48caaa95c9347be2d914c6fdf29 ] Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman commit bb97a65730f975743b2d95b5cecadc5a254c0159 Author: Mike Snitzer Date: Tue Jun 20 19:14:30 2017 -0400 dm io: fix duplicate bio completion due to missing ref count commit feb7695fe9fb83084aa29de0094774f4c9d4c9fc upstream. If only a subset of the devices associated with multiple regions support a given special operation (eg. DISCARD) then the dec_count() that is used to set error for the region must increment the io->count. Otherwise, when the dec_count() is called it can cause the dm-io caller's bio to be completed multiple times. As was reported against the dm-mirror target that had mirror legs with a mix of discard capabilities. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077 Reported-by: Zhang Yi Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit e7f17d033e58acce9df40bc44ed804720417ca2e Author: Dan Williams Date: Thu Mar 8 18:39:24 2018 +0000 mpls, nospec: Sanitize array index in mpls_label_ok() commit 3968523f855050b8195134da951b87c20bd66130 upstream. mpls_label_ok() validates that the 'platform_label' array index from a userspace netlink message payload is valid. Under speculation the mpls_label_ok() result may not resolve in the CPU pipeline until after the index is used to access an array element. Sanitize the index to zero to prevent userspace-controlled arbitrary out-of-bounds speculation, a precursor for a speculative execution side channel vulnerability. Cc: "David S. Miller" Cc: Eric W. Biederman Signed-off-by: Dan Williams Signed-off-by: David S. Miller [bwh: Backported to 4.4: - mpls_label_ok() doesn't take an extack parameter - Drop change in mpls_getroute()] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 4bd01ca7633432694cab0a098dfb9cee7b157512 Author: David Ahern Date: Thu Mar 8 18:36:16 2018 +0000 net: mpls: Pull common label check into helper commit b7b386f42f079b25b942c756820e36c6bd09b2ca upstream. mpls_route_add and mpls_route_del have the same checks on the label. Move to a helper. Avoid duplicate extack messages in the next patch. Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 54b183ea4fe96c7b80439971ee04cf634a6e0459 Author: Alexey Kodanev Date: Fri Feb 9 17:35:23 2018 +0300 sctp: verify size of a new chunk in _sctp_make_chunk() [ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ] When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev: ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by: Alexey Kodanev Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f3b580d3223463be83fa6dd1ef5585ebb99a7fec Author: Julian Wiedmann Date: Tue Feb 27 18:58:17 2018 +0100 s390/qeth: fix IPA command submission race [ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 290db9ba25917e20cc95484a52388ed0b3abbfe1 Author: Julian Wiedmann Date: Fri Feb 9 11:03:50 2018 +0100 s390/qeth: fix SETIP command handling [ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ] send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands. Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f99fb569235fbfbec9ae8f1cc78d73d2aed4c5a3 Author: Alexey Kodanev Date: Mon Feb 5 15:10:35 2018 +0300 sctp: fix dst refcnt leak in sctp_v6_get_dst() [ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ] When going through the bind address list in sctp_v6_get_dst() and the previously found address is better ('matchlen > bmatchlen'), the code continues to the next iteration without releasing currently held destination. Fix it by releasing 'bdst' before continue to the next iteration, and instead of introducing one more '!IS_ERR(bdst)' check for dst_release(), move the already existed one right after ip6_dst_lookup_flow(), i.e. we shouldn't proceed further if we get an error for the route lookup. Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6") Signed-off-by: Alexey Kodanev Acked-by: Neil Horman Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c4faf87c2beaaed9ec7f2b6e4e53560dd38b1acc Author: Tommi Rantala Date: Mon Feb 5 21:48:14 2018 +0200 sctp: fix dst refcnt leak in sctp_v4_get_dst [ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ] Fix dst reference count leak in sctp_v4_get_dst() introduced in commit 410f03831 ("sctp: add routing output fallback"): When walking the address_list, successive ip_route_output_key() calls may return the same rt->dst with the reference incremented on each call. The code would not decrement the dst refcount when the dst pointer was identical from the previous iteration, causing the dst refcnt leak. Testcase: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dev dummy0 netns TEST ip link set dev dummy1 netns TEST ip link set dev dummy2 netns TEST ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1 ip netns exec TEST ip link set dummy1 up ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2 ip netns exec TEST ip link set dummy2 up ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3 ip netns del TEST In 4.4 and 4.9 kernels this results to: [ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1 ... Fixes: 410f03831 ("sctp: add routing output fallback") Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses") Signed-off-by: Tommi Rantala Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e44cd77ca94298412591b7050d990cb63f4831a4 Author: Alexey Kodanev Date: Thu Feb 15 20:18:43 2018 +0300 udplite: fix partial checksum initialization [ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ] Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit eae0a9ae192ae829c951109ed08eb2e698167e24 Author: Guillaume Nault Date: Fri Mar 2 18:41:16 2018 +0100 ppp: prevent unregistered channels from connecting to PPP units [ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ] PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1b919f5ac999e67fb3c6eb2130e5f9f8207e07f2 Author: Nicolas Dichtel Date: Tue Feb 6 14:48:32 2018 +0100 netlink: ensure to loop over all netns in genlmsg_multicast_allns() [ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ] Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e63756d5f was pushed. However, there was no reason to stop the loop if a netns does not have listeners. Returns -ESRCH only if there was no listeners in all netns. To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH. Fixes: 134e63756d5f ("genetlink: make netns aware") CC: Johannes Berg Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 94522bee72fd4ba2a4f1b6dc3e7439dc8f4ce501 Author: Sabrina Dubroca Date: Mon Feb 26 16:13:43 2018 +0100 net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68 [ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ] According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by: Jianlin Shi Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 65fe24fdbbe0f5292d3dd5201a49725d7be21d85 Author: Jakub Kicinski Date: Mon Feb 12 21:35:31 2018 -0800 net: fix race on decreasing number of TX queues [ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ] netif_set_real_num_tx_queues() can be called when netdev is up. That usually happens when user requests change of number of channels/rings with ethtool -L. The procedure for changing the number of queues involves resetting the qdiscs and setting dev->num_tx_queues to the new value. When the new value is lower than the old one, extra care has to be taken to ensure ordering of accesses to the number of queues vs qdisc reset. Currently the queues are reset before new dev->num_tx_queues is assigned, leaving a window of time where packets can be enqueued onto the queues going down, leading to a likely crash in the drivers, since most drivers don't check if TX skbs are assigned to an active queue. Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2f9e04cad288e61d88cae6e4db441492ee685f33 Author: Arnd Bergmann Date: Thu Feb 22 16:55:34 2018 +0100 ipv6 sit: work around bogus gcc-8 -Wrestrict warning [ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ] gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 830dd26a5397cee47ca4d622966cfb6d4ee69def Author: Denis Du Date: Sat Feb 24 16:51:42 2018 -0500 hdlc_ppp: carrier detect ok, don't turn off negotiation [ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ] Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7e70022d4b0b7738eeffa6873df6193ea2dd2d15 Author: Stefano Brivio Date: Thu Feb 15 09:46:03 2018 +0100 fib_semantics: Don't match route with mismatching tclassid [ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ] In fib_nh_match(), if output interface or gateway are passed in the FIB configuration, we don't have to check next hops of multipath routes to conclude whether we have a match or not. However, we might still have routes with different realms matching the same output interface and gateway configuration, and this needs to cause the match to fail. Otherwise the first route inserted in the FIB will match, regardless of the realms: # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev eth0 scope link realms 1/2 1.1.1.1 dev eth0 scope link realms 3/4 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev ens3 scope link realms 3/4 whereas route with realms 3/4 should have been deleted instead. Explicitly check for fc_flow passed in the FIB configuration (this comes from RTA_FLOW extracted by rtm_to_fib_config()) and fail matching if it differs from nh_tclassid. The handling of RTA_FLOW for multipath routes later in fib_nh_match() is still needed, as we can have multiple RTA_FLOW attributes that need to be matched against the tclassid of each next hop. v2: Check that fc_flow is set before discarding the match, so that the user can still select the first matching rule by not specifying any realm, as suggested by David Ahern. Reported-by: Jianlin Shi Signed-off-by: Stefano Brivio Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5a12bc77d4fbbc045d7f4bf5f413cae67942d305 Author: Xin Long Date: Mon Feb 12 17:15:40 2018 +0800 bridge: check brport attr show in brport_show [ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ] Now br_sysfs_if file flush doesn't have attr show. To read it will cause kernel panic after users chmod u+r this file. Xiong found this issue when running the commands: ip link add br0 type bridge ip link add type veth ip link set veth0 master br0 chmod u+r /sys/devices/virtual/net/veth0/brport/flush timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush kernel crashed with NULL a pointer dereference call trace. This patch is to fix it by return -EINVAL when brport_attr->show is null, just the same as the check for brport_attr->store in brport_store(). Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table") Reported-by: Xiong Zhou Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 3f3437fbb2d8f780e84f507282d03facb4ccf248 Author: Ben Hutchings Date: Thu Mar 8 15:59:07 2018 +0000 Revert "led: core: Fix brightness setting when setting delay_off=0" This reverts commit 20ac8f72514b3af8b62c520d55656ded865eff00, which was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream. The bug that it should fix was only introduced in Linux 4.7, and in 4.4 it causes a regression. Reported-by: Jacek Anaszewski Cc: Matthieu CASTET Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit c2da3bb9cfab37eae4ad92d53f8e7a86d5747dd5 Author: Dan Carpenter Date: Wed Feb 14 10:14:17 2018 +0300 x86/spectre: Fix an error message commit 9de29eac8d2189424d81c0d840cd0469aa3d41c8 upstream. If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by: Dan Carpenter Cc: Andy Lutomirski Cc: Borislav Petkov Cc: David Woodhouse Cc: Greg Kroah-Hartman Cc: KarimAllah Ahmed Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: kernel-janitors@vger.kernel.org Fixes: 9005c6834c0f ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwanda Signed-off-by: Ingo Molnar Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit dff485e36287be123a844dc9164ba0417cd34552 Author: Nathan Sullivan Date: Mon Aug 15 17:20:14 2016 -0500 leds: do not overflow sysfs buffer in led_trigger_show commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream. Per the documentation, use scnprintf instead of sprintf to ensure there is never more than PAGE_SIZE bytes of trigger names put into the buffer. Signed-off-by: Nathan Sullivan Signed-off-by: Zach Brown Signed-off-by: Jacek Anaszewski Cc: Willy Tarreau Cc: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman commit 6bde094049bf3648882ff8fdfabd7871f40d3935 Author: Thomas Gleixner Date: Wed Mar 7 18:36:43 2018 +0000 x86/apic/vector: Handle legacy irq data correctly The backport of upstream commit 45d55e7bac40 ("x86/apic/vector: Fix off by one in error path") missed to fixup the legacy interrupt data which is not longer available upstream. Handle legacy irq data correctly by clearing the legacy storage to prevent use after free. Fixes: 7fd133539289 ("x86/apic/vector: Fix off by one in error path") - 4.4.y Fixes: c557481a9491 ("x86/apic/vector: Fix off by one in error path") - 4.9.y Reported-by: Ben Hutchings Signed-off-by: Thomas Gleixner Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit c86bfc7b7b01c4b98c29a39bd60e61fa8e337ebf Author: Adam Ford Date: Thu Jan 25 14:10:37 2018 -0600 ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream. The pinmuxing was missing for I2C1 which was causing intermittent issues with the PMIC which is connected to I2C1. The bootloader did not quite configure the I2C1 either, so when running at 2.6MHz, it was generating errors at time. This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman commit aa75b56eb5406294a7eb6f0d57059d1cff5fd846 Author: Jan Kara Date: Thu Jun 22 15:31:07 2017 +0200 btrfs: Don't clear SGID when inheriting ACLs commit b7f8a09f8097db776b8d160862540e4fc1f51296 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __btrfs_set_acl() into btrfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: stable@vger.kernel.org CC: linux-btrfs@vger.kernel.org CC: David Sterba Signed-off-by: Jan Kara Signed-off-by: David Sterba Signed-off-by: Nikolay Borisov Signed-off-by: Greg Kroah-Hartman commit 5fed0b3532cb69b27d286b27ea4377ea44e686e5 Author: Jiri Slaby Date: Wed Mar 7 08:56:23 2018 +0100 x86/syscall: Sanitize syscall table de-references under speculation fix In 4.4.118, we have commit c8961332d6da (x86/syscall: Sanitize syscall table de-references under speculation), which is a backport of upstream commit 2fbd7af5af86. But it fixed only the C part of the upstream patch -- the IA32 sysentry. So it ommitted completely the assembly part -- the 64bit sysentry. Fix that in this patch by explicit array_index_mask_nospec written in assembly. The same was used in lib/getuser.S. However, to have "sbb" working properly, we have to switch from "cmp" against (NR_syscalls-1) to (NR_syscalls), otherwise the last syscall number would be "and"ed by 0. It is because the original "ja" relies on "CF" or "ZF", but we rely only on "CF" in "sbb". That means: switch to "jae" conditional jump too. Final note: use rcx for mask as this is exactly what is overwritten by the 4th syscall argument (r10) right after. Reported-by: Jan Beulich Cc: Linus Torvalds Cc: Dan Williams Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: kernel-hardening@lists.openwall.com Cc: gregkh@linuxfoundation.org Cc: Andy Lutomirski Cc: alan@linux.intel.com Cc: Jinpu Wang Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman commit 42f587fa77924878173843e83470ab7d3b807012 Author: Wanpeng Li Date: Tue Feb 13 15:36:00 2018 +0100 KVM: mmu: Fix overlap between public and private memslots commit b28676bb8ae4569cced423dc2a88f7cb319d5379 upstream. Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by: Dmitry Vyukov Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Dmitry Vyukov Cc: Eric Biggers Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li commit d95280bd8c786ac5d2f379d451bcbdbdf2211e44 Author: Ulf Magnusson Date: Mon Feb 5 02:21:13 2018 +0100 ARM: mvebu: Fix broken PL310_ERRATA_753970 selects commit 8aa36a8dcde3183d84db7b0d622ffddcebb61077 upstream. The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970, but it was renamed to PL310_ERRATA_753970 by commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds"). Fix the selects to use the new name. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Fixes: fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds" cc: stable@vger.kernel.org Signed-off-by: Ulf Magnusson Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman commit f78124cca73456381d92282d9c9f3234a4474a7c Author: Rasmus Villemoes Date: Fri Feb 16 13:20:48 2018 -0800 nospec: Allow index argument to have const-qualified type commit b98c6a160a057d5686a8c54c79cc6c8c94a7d0c8 upstream. The last expression in a statement expression need not be a bare variable, quoting gcc docs The last thing in the compound statement should be an expression followed by a semicolon; the value of this subexpression serves as the value of the entire construct. and we already use that in e.g. the min/max macros which end with a ternary expression. This way, we can allow index to have const-qualified type, which will in some cases avoid the need for introducing a local copy of index of non-const qualified type. That, in turn, can prevent readers not familiar with the internals of array_index_nospec from wondering about the seemingly redundant extra variable, and I think that's worthwhile considering how confusing the whole _nospec business is. The expression _i&_mask has type unsigned long (since that is the type of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to that), so in order not to change the type of the whole expression, add a cast back to typeof(_i). Signed-off-by: Rasmus Villemoes Signed-off-by: Dan Williams Acked-by: Linus Torvalds Cc: Andy Lutomirski Cc: Arjan van de Ven Cc: Borislav Petkov Cc: Dave Hansen Cc: David Woodhouse Cc: Greg Kroah-Hartman Cc: Josh Poimboeuf Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 0dfc2fb61c79dbd4e99152525e193ae054dc86d3 Author: Mauro Carvalho Chehab Date: Sat Feb 10 06:14:10 2018 -0500 media: m88ds3103: don't call a non-initalized function commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [] (m88ds3103_attach [m88ds3103]) from [] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [] (dvb_usbv2_probe [dvb_usb_v2]) from [] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [] (usb_probe_interface) from [] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [] (driver_probe_device) from [] (__driver_attach+0x100/0x11c) [ 7.689895] [] (__driver_attach) from [] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [] (bus_for_each_dev) from [] (bus_add_driver+0x1c0/0x264) [ 7.689919] [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [ 7.689931] [] (driver_register) from [] (usb_register_driver+0x70/0x134) [ 7.689946] [] (usb_register_driver) from [] (do_one_initcall+0x44/0x168) [ 7.689963] [] (do_one_initcall) from [] (do_init_module+0x64/0x1f4) [ 7.689979] [] (do_init_module) from [] (load_module+0x20a0/0x25c8) [ 7.689993] [] (load_module) from [] (SyS_finit_module+0xb4/0xec) [ 7.690007] [] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit baf311edeed221183eb5ed51ebf8d7e849f35b0c Author: Viresh Kumar Date: Fri Feb 23 09:38:28 2018 +0530 cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream. commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ # v3.13+ Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 4fdc12f6d818b50b459be27692072e5d6447404c Author: Hans de Goede Date: Thu Feb 22 14:20:35 2018 +0100 ALSA: hda: Add a power_save blacklist commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit b43e8110ca018ecb92e95ff9048df7ab71327558 Author: Erik Veijola Date: Fri Feb 23 14:06:52 2018 +0200 ALSA: usb-audio: Add a quirck for B&W PX headphones commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by: Erik Veijola Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 9cc4d1f51dd14ad6a997237995347f269eb5551a Author: Jeremy Boone Date: Thu Feb 8 12:31:16 2018 -0800 tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone Cc: stable@vger.kernel.org Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman commit 309de32e548ded6c4366b8f4bd83dfb150c3a357 Author: Jeremy Boone Date: Thu Feb 8 12:30:01 2018 -0800 tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus commit 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone Cc: stable@vger.kernel.org Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman commit f9accc380bd69b180a5ef558f9b1a6b61edeba09 Author: Jeremy Boone Date: Thu Feb 8 12:29:09 2018 -0800 tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus commit 6d24cd186d9fead3722108dec1b1c993354645ff upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone Cc: stable@vger.kernel.org Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman