commit 4ba8e26127c393c32776dff6d79c5b82de6dc542 Author: Greg Kroah-Hartman Date: Tue Jan 11 13:57:38 2022 +0100 Linux 4.14.262 Link: https://lore.kernel.org/r/20220110071814.261471354@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman commit 6e577fb99ec677e451b79438a925b12f64c5cfa3 Author: wolfgang huang Date: Tue Dec 28 16:01:20 2021 +0800 mISDN: change function names to avoid conflicts [ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ] As we build for mips, we meet following error. l1_init error with multiple definition. Some architecture devices usually marked with l1, l2, lxx as the start-up phase. so we change the mISDN function names, align with Isdnl2_xxx. mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init': (.text+0x890): multiple definition of `l1_init'; \ arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1 Signed-off-by: wolfgang huang Reported-by: k2ci Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit fa320a57a645ed44cfb7856b42608e4453d5eafb Author: yangxingwu Date: Mon Dec 27 16:29:51 2021 +0800 net: udp: fix alignment problem in udp4_seq_show() [ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ] $ cat /pro/net/udp before: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 after: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 Signed-off-by: yangxingwu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 74203da478e4134bbf63d36dfe8d493db0dec561 Author: William Zhao Date: Thu Dec 23 12:33:16 2021 -0500 ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate [ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ] The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b7f6e0cc0050cdb75c094aacfe3334a294d8d454 Author: Lixiaokeng Date: Mon Dec 20 19:39:06 2021 +0800 scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown() [ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ] |- iscsi_if_destroy_conn |-dev_attr_show |-iscsi_conn_teardown |-spin_lock_bh |-iscsi_sw_tcp_conn_get_param |-kfree(conn->persistent_address) |-iscsi_conn_get_param |-kfree(conn->local_ipaddr) ==>|-read persistent_address ==>|-read local_ipaddr |-spin_unlock_bh When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a UAF may be triggered. Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com Reported-by: Lu Tixiong Reviewed-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Lixiaokeng Signed-off-by: Linfeilong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 731f9c9a3f5e8e9c158a8554d5420afedffe8922 Author: David Ahern Date: Mon Jan 3 10:05:55 2022 -0700 ipv6: Do cleanup if attribute validation fails in multipath route [ Upstream commit 95bdba23b5b4aa75fe3e6c84335e638641c707bb ] As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 785b31b2ab7243c1143af8a60f12fdf6858ea3a4 Author: David Ahern Date: Mon Jan 3 10:19:11 2022 -0700 ipv6: Continue processing multipath route even if gateway attribute is invalid [ Upstream commit e30a845b0376eb51c9c94f56bbd53b2e08ba822f ] ip6_route_multipath_del loop continues processing the multipath attribute even if delete of a nexthop path fails. For consistency, do the same if the gateway attribute is invalid. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a025db5658d5c10019ffed0d59026da8172897b6 Author: Hangyu Hua Date: Thu Dec 9 16:28:39 2021 +0800 phonet: refcount leak in pep_sock_accep commit bcd0f93353326954817a4f9fa55ec57fb38acbb0 upstream. sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not invoked in subsequent failure branches(pep_accept_conn() != 0). Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Aayush Agarwal Signed-off-by: Greg Kroah-Hartman commit 7c0fde210ed77172596b00064a15b9798f896a91 Author: Thomas Toye Date: Sat Jan 1 18:22:07 2022 +0100 rndis_host: support Hytera digital radios commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream. Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 23f4bbf9acd7a0cb5f364de2ded027eba446694d Author: Nathan Chancellor Date: Fri Nov 5 08:20:50 2021 -0700 power: reset: ltc2952: Fix use of floating point literals commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream. A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->trigger_delay = ktime_set(2, 500L*1E6L); ^ 3 errors generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for floating point values in this driver, as the values are only assigned to integer types. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 2af625c89bf4a41c8a0bc818d8cf30a291f216ca Author: Darrick J. Wong Date: Wed Dec 22 14:19:18 2021 -0800 xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate commit 983d8e60f50806f90534cc5373d0ce867e5aaf79 upstream. The old ALLOCSP/FREESP ioctls in XFS can be used to preallocate space at the end of files, just like fallocate and RESVSP. Make the behavior consistent with the other ioctls. Reported-by: Kirill Tkhai Signed-off-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Reviewed-by: Eric Sandeen Signed-off-by: Greg Kroah-Hartman commit d655e8f42ed816840adc6cf9964c51b2f6a472fa Author: Eric Dumazet Date: Tue Jan 4 01:45:08 2022 -0800 sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc commit 7d18a07897d07495ee140dd319b0e9265c0f68ba upstream. tx_queue_len can be set to ~0U, we need to be more careful about overflows. __fls(0) is undefined, as this report shows: UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24 shift exponent 51770272 is too large for 32-bit type 'int' CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x280/0x370 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 652d322a21bf2f21cb6b4b90986666c95fce8bbe Author: David Ahern Date: Thu Dec 30 17:36:34 2021 -0700 ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route commit 1ff15a710a862db1101b97810af14aedc835a86a upstream. Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery") Signed-off-by: David Ahern Cc: Roopa Prabhu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 647cbb5eb84de28dda8b15452cb25e448dd27835 Author: David Ahern Date: Thu Dec 30 17:36:33 2021 -0700 ipv6: Check attribute length for RTA_GATEWAY in multipath route commit 4619bcf91399f00a40885100fb61d594d8454033 upstream. Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as does the current nla_get_in6_addr. nla_memcpy protects against accessing memory greater than what is in the attribute, but there is no check requiring the attribute to have an IPv6 address. Add it. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: David Ahern Cc: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 3eb47187ffe3064228c384ee742746b8c8f3bcd4 Author: Jedrzej Jagielski Date: Fri Dec 17 14:29:05 2021 +0000 i40e: Fix incorrect netdev's real number of RX/TX queues commit e738451d78b2f8a9635d66c6a87f304b4d965f7a upstream. There was a wrong queues representation in sysfs during driver's reinitialization in case of online cpus number is less than combined queues. It was caused by stopped NetworkManager, which is responsible for calling vsi_open function during driver's initialization. In specific situation (ex. 12 cpus online) there were 16 queues in /sys/class/net//queues. In case of modifying queues with value higher, than number of online cpus, then it caused write errors and other errors. Add updating of sysfs's queues representation during driver initialization. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Lukasz Cieplicki Signed-off-by: Jedrzej Jagielski Tested-by: Gurucharan G Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman commit 2784cebc26888bf8a7a7532ca0daf8a96ead3ac9 Author: Di Zhu Date: Mon Nov 29 19:52:01 2021 +0600 i40e: fix use-after-free in i40e_sync_filters_subtask() commit 3116f59c12bd24c513194cd3acb3ec1f7d468954 upstream. Using ifconfig command to delete the ipv6 address will cause the i40e network card driver to delete its internal mac_filter and i40e_service_task kernel thread will concurrently access the mac_filter. These two processes are not protected by lock so causing the following use-after-free problems. print_address_description+0x70/0x360 ? vprintk_func+0x5e/0xf0 kasan_report+0x1b2/0x330 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e] i40e_sync_filters_subtask+0xe3/0x130 [i40e] i40e_service_task+0x195/0x24c0 [i40e] process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 ? process_one_work+0x7d0/0x7d0 kthread+0x1c3/0x1f0 ? kthread_park+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 2279810: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0xf3/0x1e0 i40e_add_filter+0x127/0x2b0 [i40e] i40e_add_mac_filter+0x156/0x190 [i40e] i40e_addr_sync+0x2d/0x40 [i40e] __hw_addr_sync_dev+0x154/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_add+0x6c/0x90 igmp6_group_added+0x214/0x230 __ipv6_dev_mc_inc+0x338/0x4f0 addrconf_join_solict.part.7+0xa2/0xd0 addrconf_dad_work+0x500/0x980 process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 kthread+0x1c3/0x1f0 ret_from_fork+0x35/0x40 Freed by task 2547073: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1b0 __i40e_del_filter+0xa3/0xf0 [i40e] i40e_del_mac_filter+0xf3/0x130 [i40e] i40e_addr_unsync+0x85/0xa0 [i40e] __hw_addr_sync_dev+0x9d/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_del+0x69/0x80 igmp6_group_dropped+0x279/0x510 __ipv6_dev_mc_dec+0x174/0x220 addrconf_leave_solict.part.8+0xa2/0xd0 __ipv6_ifa_notify+0x4cd/0x570 ipv6_ifa_notify+0x58/0x80 ipv6_del_addr+0x259/0x4a0 inet6_addr_del+0x188/0x260 addrconf_del_ifaddr+0xcc/0x130 inet6_ioctl+0x152/0x190 sock_do_ioctl+0xd8/0x2b0 sock_ioctl+0x2e5/0x4c0 do_vfs_ioctl+0x14e/0xa80 ksys_ioctl+0x7c/0xa0 __x64_sys_ioctl+0x42/0x50 do_syscall_64+0x98/0x2c0 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Di Zhu Signed-off-by: Rui Zhang Tested-by: Gurucharan G Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman commit 11b3880bcca490ea67bbc9f0cf616f1bd87fb058 Author: Tom Rix Date: Thu Dec 23 08:28:48 2021 -0800 mac80211: initialize variable have_higher_than_11mbit commit 68a18ad71378a56858141c4449e02a30c829763e upstream. Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 50ef6d3c9a4b965cf301c6133e2c6ed5ece2146a Author: Leon Romanovsky Date: Tue Jan 4 14:21:52 2022 +0200 RDMA/core: Don't infoleak GRH fields commit b35a0f4dd544eaa6162b6d2f13a2557a121ae5fd upstream. If dst->is_global field is not set, the GRH fields are not cleared and the following infoleak is reported. ===================================================== BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] ucma_init_qp_attr+0x8c7/0xb10 drivers/infiniband/core/ucma.c:1242 ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable resp created at: ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214 ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732 Bytes 40-59 of 144 are uninitialized Memory access of size 144 starts at ffff888167523b00 Data copied to user address 0000000020000100 CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== Fixes: 4ba66093bdc6 ("IB/core: Check for global flag when using ah_attr") Link: https://lore.kernel.org/r/0e9dd51f93410b7b2f4f5562f52befc878b71afa.1641298868.git.leonro@nvidia.com Reported-by: syzbot+6d532fa8f9463da290bc@syzkaller.appspotmail.com Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 94c035d9ad8523ec1d9c87013152fcb1737e1f0d Author: Pavel Skripkin Date: Tue Jan 4 21:28:06 2022 +0300 ieee802154: atusb: fix uninit value in atusb_set_extended_addr commit 754e4382354f7908923a1949d8dc8d05f82f09cb upstream. Alexander reported a use of uninitialized value in atusb_set_extended_addr(), that is caused by reading 0 bytes via usb_control_msg(). Fix it by validating if the number of bytes transferred is actually correct, since usb_control_msg() may read less bytes, than was requested by caller. Fail log: BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396 Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Reported-by: Alexander Potapenko Acked-by: Alexander Aring Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 3b74cb456a60622eba16adf4b6c63c3ca6215e67 Author: Parav Pandit Date: Wed Jul 21 17:26:48 2021 +0300 virtio_pci: Support surprise removal of virtio pci device commit 43bb40c5b92659966bdf4bfe584fde0a3575a049 upstream. When a virtio pci device undergo surprise removal (aka async removal in PCIe spec), mark the device as broken so that any upper layer drivers can abort any outstanding operation. When a virtio net pci device undergo surprise removal which is used by a NetworkManager, a below call trace was observed. kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059] watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059] CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S W I L 5.13.0-hotplug+ #8 Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020 Workqueue: events linkwatch_event RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net] Call Trace: virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net] ? __hw_addr_create_ex+0x85/0xc0 __dev_mc_add+0x72/0x80 igmp6_group_added+0xa7/0xd0 ipv6_mc_up+0x3c/0x60 ipv6_find_idev+0x36/0x80 addrconf_add_dev+0x1e/0xa0 addrconf_dev_config+0x71/0x130 addrconf_notify+0x1f5/0xb40 ? rtnl_is_locked+0x11/0x20 ? __switch_to_asm+0x42/0x70 ? finish_task_switch+0xaf/0x2c0 ? raw_notifier_call_chain+0x3e/0x50 raw_notifier_call_chain+0x3e/0x50 netdev_state_change+0x67/0x90 linkwatch_do_dev+0x3c/0x50 __linkwatch_run_queue+0xd2/0x220 linkwatch_event+0x21/0x30 process_one_work+0x1c8/0x370 worker_thread+0x30/0x380 ? process_one_work+0x370/0x370 kthread+0x118/0x140 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Hence, add the ability to abort the command on surprise removal which prevents infinite loop and system lockup. Signed-off-by: Parav Pandit Link: https://lore.kernel.org/r/20210721142648.1525924-5-parav@nvidia.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Yang Wei Signed-off-by: Greg Kroah-Hartman commit ec5f1f44067b689b6ab50afff65ad7ecf2ea3d5d Author: Naveen N. Rao Date: Thu Dec 23 16:04:39 2021 +0530 tracing: Tag trace_percpu_buffer as a percpu pointer commit f28439db470cca8b6b082239314e9fd10bd39034 upstream. Tag trace_percpu_buffer as a percpu pointer to resolve warnings reported by sparse: /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct * /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3234:9: got int * Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Reported-by: kernel test robot Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()") Signed-off-by: Naveen N. Rao Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 294e5ae1d7e1ac0ef5c668a8126871e2816ff6fb Author: Naveen N. Rao Date: Thu Dec 23 16:04:38 2021 +0530 tracing: Fix check for trace_percpu_buffer validity in get_trace_buf() commit 823e670f7ed616d0ce993075c8afe0217885f79d upstream. With the new osnoise tracer, we are seeing the below splat: Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on read at 0xc7d880000 Faulting instruction address: 0xc0000000002ffa10 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries ... NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0 LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0 Call Trace: [c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable) [c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90 [c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290 [c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710 [c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130 [c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270 [c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180 [c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278 osnoise tracer on ppc64le is triggering osnoise_taint() for negative duration in get_int_safe_duration() called from trace_sched_switch_callback()->thread_exit(). The problem though is that the check for a valid trace_percpu_buffer is incorrect in get_trace_buf(). The check is being done after calculating the pointer for the current cpu, rather than on the main percpu pointer. Fix the check to be against trace_percpu_buffer. Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: e2ace001176dc9 ("tracing: Choose static tp_printk buffer by explicit nesting count") Signed-off-by: Naveen N. Rao Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit b428e312a7dd0c32b5fc1fb4e22030e7043b0f7e Author: Takashi Iwai Date: Mon May 21 22:34:52 2018 +0200 Bluetooth: btusb: Apply QCA Rome patches for some ATH3012 models commit 803cdb8ce584198cd45825822910cac7de6378cb upstream. In commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") we tried to address the non-working Atheros BT devices by changing the quirk from BTUSB_ATH3012 to BTUSB_QCA_ROME. This made such devices working while it turned out to break other existing chips with the very same USB ID, hence it was reverted afterwards. This is another attempt to tackle the issue. The essential point to use BTUSB_QCA_ROME is to apply the btusb_setup_qca() and do RAM- patching. And the previous attempt failed because btusb_setup_qca() returns -ENODEV if the ROM version doesn't match with the expected ones. For some devices that have already the "correct" ROM versions, we may just skip the setup procedure and continue the rest. So, the first fix we'll need is to add a check of the ROM version in the function to skip the setup if the ROM version looks already sane, so that it can be applied for all ath devices. However, the world is a bit more complex than that simple solution. Since BTUSB_ATH3012 quirk checks the bcdDevice and bails out when it's 0x0001 at the beginning of probing, so the device probe always aborts here. In this patch, we add another check of ROM version again, and if the device needs patching, the probe continues. For that, a slight refactoring of btusb_qca_send_vendor_req() was required so that the probe function can pass usb_device pointer directly before allocating hci_dev stuff. Fixes: commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504 Tested-by: Ivan Levshin Signed-off-by: Takashi Iwai Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman