dosload.exe   Boot Linux directly from the CDROM.  This program 

	      loads Linux directly at 0x100000 leaving dos intact. 

	      It is used by runlinux.bat so that Dos device 

	      drivers can be accessed from Linux. 

 

bootflpy.3in  Binary image of 3.5 inch and 5.25 inch boot floppies. 

bootflpy.5in 

  

manual        This directory contains the LGX manual in texinfo, dvi, 

	      and postscript formats. 

 

rawrite.exe   DOS program useful for creating boot floppies. 

              Copy the file "bootflpy.bin" onto a floppy diskette to 

              make a boot diskette.  This works for both 3.5" and 

              5.25" diskettes. 

 

runlinux.bat  Batch file that boots the Linux kernel from the CDROM 

              (in lieu of using a boot floppy).  

 

 

--------------------------------------------------------- 

Last Minute Additions:  

 

Cyclades Multiport Serial Card Support: 

	Cyclades has sponsored a Linux Driver for some of 

	their multiport serial cards.  Written by 

	Randolph Bentson, this driver can be compiled 

	into your kernel.  See the manual for more 

	information on recompiling the kernel, and 

	call Cyclades at 1-800-347-6601 for information 

	on obtaining their hardware. 

 

Jmouse Driver: 

 

	There is now a Linux driver for the Sejin J-Mouse 

	From X's point of view it works like any other bus 

	mouse.  So just put the line 

	busmouse "/dev/jmouse" 

	in the appropriate place in your Xconfig file to 

	use the J-Mouse.