/* using.txt - manual for RadioTrack program 
 * Tue Jan 10 12:15:17 GMT+0200 1995 
 * G.J. le Grange */

If you run the radio program without parameters, you 
will see:

   RadioTrack control program
   Gideon le Grange, 1994
   radio usage: radio on | off | + | - | <channel> | <freq>
   
You can use one of the options at a time.

on               - switches on the card, playing the station 
                   specified as "default" in the confiuration 
		   file
		   
off              - switches off the card

+                - increases the volume 

-                - decreases the volume

<channel>        - start playing the channel called <channel>
                   in the configuration file 
		   
<freq>           - start playing at frequency <freq> 


When switching on the card, you do not have to 
first run "radio on", you can simply type "radio <channel>"
if you do not want to listen to the default channel.

As of version 1.1 you must be at the console to use the 
program.

I do not document the format of the /etc/radio.conf 
file here, since it is self-documenting. 

Gideon le Grange <legrang@active.co.za> <legrang@cs.sun.ac.za>
  
