#!/usr/bin/perl

#######################################################################
# LiVES transition_fade2 plugin, version 1.7
# RFX version 1.7
# autogenerated from script by Salsaman|

# rendered plugins should accept:
# <plugin_name> version (return <plugin_name> version <version>)
# <plugin_name> get_define
# <plugin_name> get_capabilities
# <plugin_name> get_description (e.g. "Edge detect|Edge detecting|1|1|")
# <plugin_name> clear (clean up any plugin generated temp files)
# and optionally any of: 
# <plugin_name> get_parameters
# <plugin_name> get_param_window
# <plugin_name> get_onchange
# <plugin_name> onchange_<when> (for any triggers, e.g. onchange_init)
#
# they must accept:
# <plugin_name> process <parameters>

# You should not skip any frames, if a frame is not changed you must do:
# `cp $in $out`
#
# for *non-Perl* plugins, LiVES will call:
# <plugin_name> process "<dir>" <in_ext> <out_ext> <start> <end>
#  <width> <height> <parameters>
# first you should chdir to <dir>
# then you should create all output frames %8d$out_ext in numerical 
# from start to end inclusive,
# each time calling sig_progress (see smogrify) - writes current frame number to 
# <dir>/.status
# and checking for pause
#
# Any errors should be transmitted as in sig_error - 
# write "error|msg1|msg2|msg3|" to <dir>/.status
# msgn must not contain "\n", but can be omitted

# output frames should be named %8d$out_ext in the same directory
# after processing, you should leave no gaps in out frames, you should not resize
# or change the palette from RGB24 (LiVES will check and autocorrect this soon)

# Also you must implement your own: &sig_error and &sig_progress


#######################################################################

use POSIX;

my $command=$ARGV[0];

if ($command eq "get_capabilities") {
    # capabilities is a bitmap field
    # 0x0001 == slow (hint to GUI)
    # 0x0002 == may resize (all frames to  x )
    # 0x0004 == block mode generator
    # 0x8000 == reserved
    print "32768\n";
    exit 0;
}

if ($command eq "version") {
    print "transition_fade2 version 2 : builder version 1.0.10\n";
    exit 0;
}

if ($command eq "get_define") {
    print "|1.7\n";
    exit 0;
}

if ($command eq "get_description") {
    #format here is "Menu entry|Action description|min_frames|number_of_in_channels|"
    # min_frames==-1 indicates a special "no processing" effect. This allows more
    #general parameter windows which are not really effects (e.g. frame_calculator)
    print "Fade|Fading|1|2|\n";
    exit 0;
}


if ($command eq "get_parameters") {
    # "name|label|type|other fields..."
    # eg. print "radius|_radius|num0|1|1|100|";
    # types can be numx,colRGB24,bool,string or string_list
    print "fstart|_Fade start|num0|50|0|100|\n";
    print "fend|Fade _end|num0|50|0|100|\n";
    print "w|_Width|num0|0|0|10000|\n";
    print "h|_Height|num0|0|0|10000|\n";
    print "cx|Centre _X|num0|0|0|10000|\n";
    print "cy|Centre _Y|num0|0|0|10000|\n";
    print "finf|Frame _in frame position of clipboard...|bool|0|\n";
    exit 0;
}

if ($command eq "get_param_window") {
    print "layout|p0|\"%\"|p1|\"%\"||\n";
    print "layout|hseparator||\n";
    print "layout|p6||\n";
    print "layout|p2|p3||\n";
    print "layout|p4|p5||\n";
    print "special|mergealign|0|1||\n";
    exit 0;
}

if ($command eq "get_onchange") {
    print "init|\n";
    print "2|\n";
    print "3|\n";
    print "6|\n";
    exit 0;
}

#######################################################

if ($command eq "process") {

# in case of error, you should do:
# &sig_error("msg1","msg2","msg3","msg4"); [ msg's are optional, but must not
# contain newlines (\n) ]

##### check requirements first #######
    if (&location("convert") eq "") {
      &sig_error("You must install 'convert' before you can use this effect.");
      exit 1;
    }
    if (&location("composite") eq "") {
      &sig_error("You must install 'composite' before you can use this effect.");
      exit 1;
    }

###### handle parameters #############
# autogenerated from get_parameters

    unless (defined($ARGV[1])) {
      $p0=50;
    }
    else {
      $p0=$ARGV[1];
    }
    unless (defined($ARGV[2])) {
      $p1=50;
    }
    else {
      $p1=$ARGV[2];
    }
    unless (defined($ARGV[3])) {
      $p2=0;
    }
    else {
      $p2=$ARGV[3];
    }
    unless (defined($ARGV[4])) {
      $p3=0;
    }
    else {
      $p3=$ARGV[4];
    }
    unless (defined($ARGV[5])) {
      $p4=0;
    }
    else {
      $p4=$ARGV[5];
    }
    unless (defined($ARGV[6])) {
      $p5=0;
    }
    else {
      $p5=$ARGV[6];
    }
    unless (defined($ARGV[7])) {
      $p6=0;
    }
    else {
      $p6=$ARGV[7];
    }
    $!=0;
    $p0=int(POSIX::strtod($p0)*1+.5)/1;
    if ($p0<0) {
       &sig_error("fstart must be >= 0");
       exit 1;
    }
    if ($p0>100) {
       &sig_error("fstart must be <= 100");
       exit 1;
    }
    $!=0;
    $p1=int(POSIX::strtod($p1)*1+.5)/1;
    if ($p1<0) {
       &sig_error("fend must be >= 0");
       exit 1;
    }
    if ($p1>100) {
       &sig_error("fend must be <= 100");
       exit 1;
    }
    $!=0;
    $p2=int(POSIX::strtod($p2)*1+.5)/1;
    if ($p2<0) {
       &sig_error("w must be >= 0");
       exit 1;
    }
    if ($p2>10000) {
       &sig_error("w must be <= 10000");
       exit 1;
    }
    $!=0;
    $p3=int(POSIX::strtod($p3)*1+.5)/1;
    if ($p3<0) {
       &sig_error("h must be >= 0");
       exit 1;
    }
    if ($p3>10000) {
       &sig_error("h must be <= 10000");
       exit 1;
    }
    $!=0;
    $p4=int(POSIX::strtod($p4)*1+.5)/1;
    if ($p4<0) {
       &sig_error("cx must be >= 0");
       exit 1;
    }
    if ($p4>10000) {
       &sig_error("cx must be <= 10000");
       exit 1;
    }
    $!=0;
    $p5=int(POSIX::strtod($p5)*1+.5)/1;
    if ($p5<0) {
       &sig_error("cy must be >= 0");
       exit 1;
    }
    if ($p5>10000) {
       &sig_error("cy must be <= 10000");
       exit 1;
    }
    $p6=~(~$p6);
        $nwidth=$width;
$nheight=$height;

    $antialias=&rc_get("antialias");
    if ($p6) {
        $x=$p4-int($p2/2+.5);
        $y=$p5-int($p3/2+.5);
    
    	if ($x<0) {$x=0};
    	if ($y<0) {$y=0};
    }
    else {
        $p2=$width;
        $p3=$height;
        $x=$y=0;
    }
    $step=0.;
    if ($end>$start) {
        $step=($p1-$p0)/($end-$start);
    }

################# loop through frames #################
    $frame2=$start2;
    for ($frame=$start;$frame<=$end;$frame++) {
	# sig progress will update the progress bar from $start->$end
	$name=&mkname($frame);
	$in="$name$img_ext";
        $name2=&mkname($frame2);
        $in2="$clipboard/$name2$img_ext";
        unless (-f $in2) {
            # end of clipboard reached, loop back to start
            $frame2=$start2;
            $name2=&mkname($frame2);
            $in2="$clipboard/$name2$img_ext";
	}
	$out="$name$out_ext";

 while (! -f $in) {
     sleep 1;
 }

##################### the all-important bit #######################

        system("$composite_command -compose plus -dissolve ".int($p0)." -geometry $p2!x$p3!+$x!+$y! $in2 -size $width!x$height! $in $out");
        $p0+=$step;
        if (($p1>0&&$p0>$p1*1.)||($p1<0&&$p0<$p1*1.)) {$p0=$p1*1.;}

###################################################################
        $frame2++;
        if (! -f $out) {
            print STDERR "Warning: effect plugin transition_fade2 skipped frame $frame !";
            `cp $in $out`;
        }
	&sig_progress($frame);
    }
    return 1;
}



########## Post loop code ############
if ($command eq "clear") {
}

########## Triggers ############

if ($command eq "onchange_init") {
    $p0=@ARGV[1];
    $p0_min=@ARGV[2];
    $p0_max=@ARGV[3];
    $p1=@ARGV[4];
    $p1_min=@ARGV[5];
    $p1_max=@ARGV[6];
    $p2=@ARGV[7];
    $p2_min=@ARGV[8];
    $p2_max=@ARGV[9];
    $p3=@ARGV[10];
    $p3_min=@ARGV[11];
    $p3_max=@ARGV[12];
    $p4=@ARGV[13];
    $p4_min=@ARGV[14];
    $p4_max=@ARGV[15];
    $p5=@ARGV[16];
    $p5_min=@ARGV[17];
    $p5_max=@ARGV[18];
    $p6=@ARGV[19];
    $width=@ARGV[20];
    $height=@ARGV[21];
    $start=@ARGV[22];
    $end=@ARGV[23];
    $last=@ARGV[24];
    $length=$end-$start+1;
    $width2=@ARGV[25];
    $height2=@ARGV[26];

    $p2=$width2; $p2_max=$width;
    $p3=$height2; $p3_max=$height;
    $p4=int($width/2+.5);
    $p5=int($height/2+.5);

    print "$p0 $p0_min $p0_max $p1 $p1_min $p1_max $p2 $p2_min $p2_max $p3 $p3_min $p3_max $p4 $p4_min $p4_max $p5 $p5_min $p5_max $p6 ";
    exit 0;
}

if ($command eq "onchange_6") {
    $p0=@ARGV[1];
    $p0_min=@ARGV[2];
    $p0_max=@ARGV[3];
    $p1=@ARGV[4];
    $p1_min=@ARGV[5];
    $p1_max=@ARGV[6];
    $p2=@ARGV[7];
    $p2_min=@ARGV[8];
    $p2_max=@ARGV[9];
    $p3=@ARGV[10];
    $p3_min=@ARGV[11];
    $p3_max=@ARGV[12];
    $p4=@ARGV[13];
    $p4_min=@ARGV[14];
    $p4_max=@ARGV[15];
    $p5=@ARGV[16];
    $p5_min=@ARGV[17];
    $p5_max=@ARGV[18];
    $p6=@ARGV[19];
    $width=@ARGV[20];
    $height=@ARGV[21];
    $start=@ARGV[22];
    $end=@ARGV[23];
    $last=@ARGV[24];
    $length=$end-$start+1;
    $width2=@ARGV[25];
    $height2=@ARGV[26];

    if ($p6) {$p4_max=$width-1-int($p2/2+.5);$p4_min=int($p2/2+.5);$p5_max=$height-1-int($p3/2+.5);$p5_min=int($p3/2+.5);}

    print "$p0 $p0_min $p0_max $p1 $p1_min $p1_max $p2 $p2_min $p2_max $p3 $p3_min $p3_max $p4 $p4_min $p4_max $p5 $p5_min $p5_max $p6 ";
    exit 0;
}

if ($command eq "onchange_2") {
    $p0=@ARGV[1];
    $p0_min=@ARGV[2];
    $p0_max=@ARGV[3];
    $p1=@ARGV[4];
    $p1_min=@ARGV[5];
    $p1_max=@ARGV[6];
    $p2=@ARGV[7];
    $p2_min=@ARGV[8];
    $p2_max=@ARGV[9];
    $p3=@ARGV[10];
    $p3_min=@ARGV[11];
    $p3_max=@ARGV[12];
    $p4=@ARGV[13];
    $p4_min=@ARGV[14];
    $p4_max=@ARGV[15];
    $p5=@ARGV[16];
    $p5_min=@ARGV[17];
    $p5_max=@ARGV[18];
    $p6=@ARGV[19];
    $width=@ARGV[20];
    $height=@ARGV[21];
    $start=@ARGV[22];
    $end=@ARGV[23];
    $last=@ARGV[24];
    $length=$end-$start+1;
    $width2=@ARGV[25];
    $height2=@ARGV[26];

    $p4_max=$width-1-int($p2/2+.5);$p4_min=int($p2/2+.5);

    print "$p0 $p0_min $p0_max $p1 $p1_min $p1_max $p2 $p2_min $p2_max $p3 $p3_min $p3_max $p4 $p4_min $p4_max $p5 $p5_min $p5_max $p6 ";
    exit 0;
}

if ($command eq "onchange_3") {
    $p0=@ARGV[1];
    $p0_min=@ARGV[2];
    $p0_max=@ARGV[3];
    $p1=@ARGV[4];
    $p1_min=@ARGV[5];
    $p1_max=@ARGV[6];
    $p2=@ARGV[7];
    $p2_min=@ARGV[8];
    $p2_max=@ARGV[9];
    $p3=@ARGV[10];
    $p3_min=@ARGV[11];
    $p3_max=@ARGV[12];
    $p4=@ARGV[13];
    $p4_min=@ARGV[14];
    $p4_max=@ARGV[15];
    $p5=@ARGV[16];
    $p5_min=@ARGV[17];
    $p5_max=@ARGV[18];
    $p6=@ARGV[19];
    $width=@ARGV[20];
    $height=@ARGV[21];
    $start=@ARGV[22];
    $end=@ARGV[23];
    $last=@ARGV[24];
    $length=$end-$start+1;
    $width2=@ARGV[25];
    $height2=@ARGV[26];

    $p5_max=$height-1-int($p3/2+.5);$p5_min=int($p3/2+.5);

    print "$p0 $p0_min $p0_max $p1 $p1_min $p1_max $p2 $p2_min $p2_max $p3 $p3_min $p3_max $p4 $p4_min $p4_max $p5 $p5_min $p5_max $p6 ";
    exit 0;
}
